| Home > HP Parts Directory > Servers > NetServer LH3 ( PII/350 ) |
 |
NetServer LH3 ( PII/350 ) |
| Part # |
|
| 5183-3418 |
HP Terminator Board - Installed in a Processor Socket When the Processor is Not Installed |
| D2140-69004 |
HP NetRAID-1Si One-Channel Disk Array Controller - PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A) |
| D4992-69001 |
HP NetRAID-1 One-Channel Disk Array Controller - PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A) |
| D5000-69000 |
HP System (Mother) Board - with Super VGA, IDE, Dual Ultra2 SCSI Controller, Ultra2 to Single-Ended SCSI Converter - One of the Large Boards in Center of Chassis |
| D5000-69001 |
HP I/O Board - Contains ISA and PCI Accessory Slots - One of the Large Boards in Center of Chassis |
| D5000-69002 |
HP Power management and backplane PC board |
| D5013-63003 |
HP LAN Adapter - PCI 10/100TX LAN Board for NetServer (D5013A) |
| D5955-69001 |
HP NetRAID-3Si Three-Channel Disk Array Controller - PCI Board With Three Internal 68 Pin High Density and Three External 68 Pin High Density Ultra Wide SCSI Connectors (D5955A) |
| D5990-69000 |
HP Fiber channel array - Redundant module with two fiber channel ports and two very high density 68-pin SCSI connectors |
| J2585-69011 |
HP PCI 32-bit LAN interface board - Has RJ-45 connector - Supports both EtherTwist 10Base-T and 100VG/802.12 - (J2585B, part of J3009B, part of of J3010B) |
|
|
| 5002-3748 |
HP Mounting tray for 5.25-inch drives - For removable media devices in the upper drive slots (P/O D2199A) |
| 5064-3531 |
HP Processor Fan and Bracket - Mounted on Side of Processor Bracket |
| 5064-3538 |
HP Dual Fan Assembly - Installed Near the Power Supply |
| 5064-3553 |
HP Fan Assembly - Installed in the Rear on the Chassis Near the System Board |
| 5064-4639 |
HP Front panel assembly bezel - Mounts over the control panel |
| 5064-4672 |
HP Dual Fan and Accessory Board Guide Assembly - Installed Near the I/O Board |
| 5064-7050 |
HP Main Bezel (Rack Mount Version) - Covers the front of the NetServer - Includes mounting hardware and latch |
| 5064-7084 |
HP Main Bezel (Pedestal Version) - Covers the Front of the NetServer |
| 5064-9001 |
HP Main Bezel (Rack Mount Version) Low Profile - Covers the Front of the NetServer |
| C2260-60078 |
HP Hard Drive Mounting Tray (Dove Gray) (P/O D2198A) - for Mounting 3.5 Inch Drive in Front 5.25 Inch Slots of Chassis - Includes: Tray, Front Panel, and Status Cable with LED |
| D2198A |
HP Hard Drive Mounting Tray Kit (Dove Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2198B |
HP Hard Drive Mounting Tray Kit (Flint Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2199A |
HP Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws - For the |
| D6127A |
HP Half-Height Ultra-2 SCA SCSI Disk Drive Hot Swap Tray |
| D6128A |
HP Low-Profile Ultra-2 SCA SCSI Disk Drive Hot Swap Tray |
| J1518A |
HP Rack mounted retractable tray for keyboard and mouse - Quartz Gray |
|
|
| 5002-3748 |
HP Mounting tray for 5.25-inch drives - For removable media devices in the upper drive slots (P/O D2199A) |
| C1528H |
HP SureStore DAT 8i - 4/8GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C1529H |
HP SureStore DAT 8e - 4/8GB External DAT Drive - Single Ended Narrow SCSI-2 |
| C1555B |
HP SureStore DAT 24i - 12/24GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C1556B |
HP SureStore DAT 24e - 12/24GB External DAT Drive - Single Ended Narrow SCSI-2 |
| C1559C |
HP SureStore DAT 24x6e - 6x12/24GB External Autoloader DAT Drive - Single Ended Narrow SCSI-2 |
| C1559D |
HP 6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559DR |
HP 6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1579A |
HP 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C1579AR |
HP 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C2260-60078 |
HP Hard Drive Mounting Tray (Dove Gray) (P/O D2198A) - for Mounting 3.5 Inch Drive in Front 5.25 Inch Slots of Chassis - Includes: Tray, Front Panel, and Status Cable with LED |
| C5170F |
HP SureStore 4115we DLT Library - a Single DLT4000 Drive, Fast Wide SCSI Interface, 15 Slots |
| C5170J |
HP SureStore 7115we DLT Library - a Single DLT7000 Drive, Fast Wide SCSI Interface, 15 Slots |
| C5171F |
HP SureStore 4215we DLT Library - Two DLT4000 Drives, Fast Wide SCSI Interface, 15 Slots |
| C5171J |
HP SureStore 7215we DLT Library - Two DLT7000 Drives, Fast Wide SCSI Interface, 15 Slots |
| C5175F |
HP SureStore 4228w DLT Library - Two DLT4000 Drives, Multiple Wide Differential SCSI Interfaces, 28 Slots |
| C5175J |
HP SureStore 7228w DLT Library - Two DLT7000 Drives, Multiple Wide Differential SCSI Interfaces, 28 Slots |
| C5177F |
HP SureStore 4448w DLT Library - Four DLT4000 Drives, Multiple Wide Differential SCSI Interfaces, 48 Slots |
| C5177J |
HP SureStore 7448w DLT Library - Four DLT7000 Drives, Multiple Wide Differential SCSI Interfaces, 48 Slots |
| C5647A |
HP SureStore DLT 40i - 20/40GB Internal DLT Drive - Single Ended Narrow SCSI-2 |
| C5658A |
HP SureStore DLT 70e - 70GB External DLT Drive - Single Ended Wide SCSI-2 |
| C5677B |
HP SureStore DAT 24x6i - 6x12/24GB Internal Autoloader DDS-3 (DAT) Drive - Single Ended Narrow SCSI-2 |
| C5726A |
HP 80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| C5726AR |
HP 80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| C6280F |
HP SureStore DLT Autoloader 418 - a Single DLT4000 Drive, Ultra SCSI Interface, 8 Slots |
| D2035-60282 |
HP 1.44MB floppy disk drive (Flint Gray) - 3.5-inches, 1/3 height - (Part of D2035A/B) |
| D2035B |
HP 1.44MB Floppy Drive (Flint Gray Bezel)- 3.5 Inch, 1/3 Height |
| D2198A |
HP Hard Drive Mounting Tray Kit (Dove Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2198B |
HP Hard Drive Mounting Tray Kit (Flint Gray) (3/Pkg) - 5.25in Wide Tray/Bezel - for Mounting 3.5in Hard Drive in the Upper Drive Slot Includes: Tray, Front Panel & Status Cable w/ LED |
| D2199A |
HP Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws - For the |
| D4383B |
HP 24X (Max) Speed IDE CD ROM Drive with Integral Loading Tray Uses IDE Controller Built Into the System Processor Board |
| D4389-60091 |
HP 48x-max speed IDE CD-Rom drive (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control - Equivalent replacement for numerous 24X (max) or 32X (max) drives - |
| D4910-69001 |
HP Hard Drive - 4.2GB, 7200 RPM Ultra Wide SCSI (P/O D4910A) |
| D4910A |
HP Hard Drive - 4.2GB, 7200 RPM - Includes Attached Wide Single Ended SCSI Interface Board |
| D4911-69001 |
HP 9.1GB, 7200 RPM Ultra Wide SCSI Hard Drive Module (P/O D4911A) |
| D4911A |
HP 9.1GB, 7200 RPM Ultra Wide SCSI Hard Drive Module |
| D6104-69001 |
HP 4.2GB 'Hot Swap' Hard Drive Module, 7200 RPM - Includes Attached Ultra2 SCSI Controller Board (D6104A) |
| D6104A |
HP 4.2GB 'Hot Swap' Hard Drive Module - Includes Attached Ultra2 SCSI Interface Board |
| D6106-69001 |
HP 9.1GB 'Hot swap' Ultra2 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D6106A) |
| D6106A |
HP 9.1GB 'hot swap' Ultra2 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| D6107-69001 |
HP 9.1GB 'hot swap' Ultra2 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D6107A) |
| D6107A |
HP 9.1GB 'hot swap' Ultra2 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| D6108-69001 |
HP 18.2GB 'hot swap' Ultra-2 SCSI hard drive module - 7200 RPM, half height - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D6108A) |
| D6127A |
HP Half-Height Ultra-2 SCA SCSI Disk Drive Hot Swap Tray |
| D6128A |
HP Low-Profile Ultra-2 SCA SCSI Disk Drive Hot Swap Tray |
| D6506A |
HP 24X (Max) Speed IDE CD ROM Drive with Integral Loading Tray Uses IDE Controller Built Into the System Processor Board - Package of 10 D4383B Drives |
| D7031-69001 |
HP 18.2GB 10,000 RPM 'Hot Swap' Ultra-2 SCSI Hard Drive Module Half-Height (D7031A) |
| D7031A |
HP 18.2GB 10,000RPM 'Hot Swap' Wide Ultra2 SCSI Hard Drive Module - Includes Attached Ultra2 SCSI Interface Board |
| D7049-69001 |
HP 9.1GB, 10,000 RPM Ultra Wide SCSI Hard Drive Module (P/O D7049A) |
| D7049A |
HP 9.1GB, 10000 RPM Ultra Wide SCSI hard drive module |
| D7174-69000 |
HP 18GB 'hot swap' Ultra2 SCSI hard drive module - 7200 RPM - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D7174A) |
| D7174A |
HP 18GB 'hot swap' Ultra2 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| D7175-69000 |
HP 18.2GB 'Hot swap' Ultra2 SCSI hard drive module - 10000 RPM - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D7175A) |
| D7175A |
HP 18GB 'hot swap' Ultra2 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| D7176-69001 |
HP Hard Drive - 18.2GB, 7200 RPM - Includes Attached Wide Single Ended SCSI Interface Board (P/O D7176A) |
| D7176A |
HP 18.2GB, 7200 RPM Ultra Wide SCSI hard drive module |
| D8210-69000 |
HP 36.4GB 'hot swap' Ultra2 SCSI hard drive module - 10000 RPM, half height - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| D9419-69002 |
HP 36.4GB 'hot swap' Ultra3 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D9419A) |
| D9420-69001 |
HP 73.4GB 'hot swap' Ultra3 SCSI hard drive module - 10000 RPM, half height - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| D9421-69001 |
HP 18.2GB 'hot swap' Ultra3 SCSI hard drive module - 15000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (D9421A) |
| J1518A |
HP Rack mounted retractable tray for keyboard and mouse - Quartz Gray |
| P1166-69003 |
HP 18.2GB 'hot swap' Ultra3 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| P1167-69002 |
HP 18.2GB, 10,000 RPM Ultra3 Wide SCSI LVD hard drive module, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW) |
| P1168-69003 |
HP 9.1GB 'hot swap' Ultra3 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (P1168A) |
| P1169-69002 |
HP 36.4GB, 10,000 RPM Ultra3 Wide SCSI LVD hard drive module (Seagate ST336704LW) |
| P1213-69001 |
HP 9GB, 7200 RPM Ultra3 SCSI Hard Drive Module (P/O P1213A) |
| P1214-69002 |
HP 9GB Ultra3 SCSI hard drive module - 10000 RPM, 3.5in form factor, low profile |
| P1215-69001 |
HP 18GB Ultra3 SCSI hard drive - 7200 RPM , 3.5in form factor, 1.0in high - Comes mounted on drive tray |
| P1216-69001 |
HP 18.2GB 'hot swap' Ultra3 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (P1216A) |
| P1217-69001 |
HP 9.1GB 'hot swap' Ultra3 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer - (P1217A) |
|
|
| 1818-6527 |
HP 512KB 50nS Video Memory IC - Plugs Into Sockets on System Processor Board - (2 or 4 Required, 1MB Kit is D4219A) - Installing 2 IC's Will Upgrade to 2MB Total of Video Memory |
| 1818-7485 |
HP I/O Memory - 16MB 50nS EDO SIMM Memory Module |
| D4295-69001 |
HP 32MB EDO DIMM Memory Module - 60nS, 72-Bit (D4295A) |
| D5955-63003 |
HP 16MB SIMM for NetRAID 3Si disk array controller |
| D6097-69001 |
HP 64MB 100MHz ECC SDRAM DIMM Module (D6097A) |
| D6097A |
HP 64MB 100MHz ECC SDRAM DIMM Module |
| D6098-69001 |
HP 128MB 100MHz ECC SDRAM DIMM Module (D6098A) |
| D6098A |
HP 128MB 100MHz ECC SDRAM DIMM Module |
| D6099-69001 |
HP 256MB 100MHz Registered ECC SDRAM DIMM module (D6099A) |
| D6099A |
HP 256MB 100MHz ECC SDRAM DIMM Module |
| D6112-69001 |
HP 64MB EDO DIMM Memory Module (Part Number is for One of Four Modules that Come in the Memory Upgrade Kit) (P/O D6112A) |
| D6112A |
HP 256MB (4x64MB) 50ns ECC EDO DIMM Kit (for LH4 and LXr 8000) |
| D6114-69001 |
HP 256MB EDO DIMM Memory Module (Part Number is for One of Four Modules that Come in the Memory Upgrade Kit) (P/O D6114A) |
| D6114A |
HP 1GB (4x256MB) 50ns ECC EDO DIMM Kit (for LH4 and LXr 8000) |
| D7132-69000 |
HP 64MB SIMM for NetRAID 3Si disk array controller (D7132A) |
|
Power Supplies & Accessories |
| 5064-6603 |
HP Power supply module - 300 watts - Plugs into the power supply cage |
| 8120-1348 |
HP Power cord (Black) - 18 AWG, - 2.3m (7.5ft) long - Has 5-15P (M) plug and straight C13 (F) receptacle (For 120V, 10A in the USA and Canada) - (E7743A) |
| 8120-1575 |
HP Daisy chain' power cord (Jade Gray) - 18 AWG, 76cm (30in) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| 8120-1625M |
HP Daisy chain' power cord (Black) - 18 AWG, 2.5m (8.2ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output - 240V, 10A - (E7742A) |
| 8120-1751 |
HP Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
| 8120-4540 |
HP Power cord - Has 5-15P (M) plug for power input and C13 (F) plug for power output - 125V, 10A, 1.8m |
| 8120-6357 |
HP Power cord (Black) - 15 AWG, 2.5m (8.2ft) long - Has unterminated (M) end for direct connection or customer installed plug for power input, and straight (F) C19 |
| 8120-6362 |
HP Power cord (Black) - 2.5m (8.2ft) long - Has NEMA L6-20P (M) plug for power input, and (F) C19 receptacle for power output (For 120V in the USA, Canada, Thailand, Philippines |
| 8120-6476 |
HP Daisy chain' power cord (Black) - 18 AWG, 2.0m (6.6ft) long - Has C14 (M) plug for power input, and C13 (F) plug for power output - 240V, 10A |
| 8120-6903 |
HP Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (For the USA, Canada, and Japan) - (E7803A) |
| 8120-6961 |
HP Daisy chain' power cord (Black) - 14 AWG, 4.0m (13.1ft) long - Has C20 (M) plug for power input, and C19 (F) plug for power output - 240V, 16A - (E7804A) |
| 8120-8351 |
HP Power cord (Black) - 12 AWG, 2.4m (8.0ft) long - Has L6-30P (M) plug for power input, and straight (F) C19 receptacle for power output - (E7799A) |
| D6093A |
HP Power supply cage kit - Includes power supply cage, power supply module, hot swap fan tray |
| D6095A |
HP Redundant Power Supply Module (May Require a Second Power Supply Cage) |
| E7742A |
HP Daisy chain' power cord for rack cabinets - Has C14 (M) plug for power input and C13 (F) plug for power output - 2.5m (8.2ft) long - 240V, 10A |
| E7743A |
HP PDU Power cord - 120V, 10A - 2.5m (8.2ft) long with 5-15P (M) plug and straight C13 (F) receptacle (USA and Canada) |
| E7798A |
HP PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 2.5m (8.2ft) long - 240V, 16A |
| E7802A |
HP PDU Power Cord - Has C19 (F) Plug for PDU and 5-20P (M) Plug for UPS or Other Power Source - 125V, 16A, 4.5m |
| E7803A |
HP Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (For the USA, Canada, and Japan) |
| E7804A |
HP PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 4.0m (13.1ft) long - 240V, 16A |
| E7805A |
HP PDU power cord - Has L6-30P (M) plug for power input and C19 (F) plug for PDU power output - 4.5m (14.8ft) long |
| E7806A |
HP Power cord - 4.5m (14.8ft) long - Has a stripped end for power input and a straight C19 (F) receptacle for power output |
| E7807A |
HP PDU Power Cord - Has C14 (M) Plug for Power Input and C15 (F) for Power Output - 250V, 10A, 0.76m |
|
|
| 1821-4608 |
HP Intel Pentium II processor - 350MHz (Deschutes, 100MHz front side bus, 512KB Level-2 cache, Slot 1) |
| 5183-2471 |
HP Heat Sink for Pentium II Module |
| D6091A |
HP 350MHz Pentium II Processor Module - with 512K Level 2 Cache |
| D6092A |
HP 400MHz Pentium II Processor Module - with 512K Level 2 Cache |
| D6119-69001 |
HP Intel Pentium II Xeon processor - 400MHz (Drake, 100MHz front side bus, 1MB Level-2 cache, Slot 2) - Includes heat sink - For LH4 and LXr 8000 (Part of D6119A) |
| D6119A |
HP 400MHz Pentium II Xeon Processor Module - with 1MB Level 2 Cache (for LH4 and LXr 8000) |
| D7007-69001 |
HP Intel Pentium II Xeon processor - 400MHz (Drake, 100MHz front side bus, 512KB Level-2 cache, Slot 2) - Includes heat sink - For LH4 and LXr 8000 (Part of D7007A) |
| D7007A |
HP 400MHz Pentium II Xeon Processor Module - with 512KB Level 2 Cache (for LH4 and LXr 8000) |
| D7032A |
HP 450MHz Pentium II Processor Module - with 512k Level 2 Cache |
| D7129-69001 |
HP Intel Pentium III processor - 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Includes heat sink |
| D8583-69000 |
HP Intel Pentium III processor - 550MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Includes heat sink - (Requires processor fan accessory, D8595A) |
| D9342-69001 |
HP Intel Pentium III processor - 600MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Requires processor fan accessory (D8595A) |
|
|
| 1420-0356 |
HP 3.0V battery (20mm diameter, 3.2mm thick, 220 mA-hr) - Type CR2032 lithium |
| 5064-7980 |
HP SCSI Cable (C72) - From Single Ended SCSI Connector on I/O Board to Non Hot-Swap Single Ended SCSI Internal Drives |
| 5183-3442 |
HP IDE Cable (D7) - From Backplane Board to IDE CD-Rom Drive |
| 5183-3443 |
HP Floppy Cable (F7) - From Backplane Board to Floppy Drive |
| 5183-3446 |
HP SCSI Cable (C73) - From SCSI 'B' Connector on I/O Board to Rear Panel |
| 5183-3449 |
HP Power Cable (P3) - From Backplane Board to Secondary Hot-Swap Mass Storage, Non Hot-Swap SCSI Drives, CD-Rom, Floppy Drive |
| A1658-62020 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long - (C2924A) |
| A1658-62022 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10.0m (33ft) long - (C2925A) |
| A1658-62023 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 20.0m (66ft) long - (C2926A) |
| C2924A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C2924C |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 2.5m (8.2ft) long |
| C2925A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10m (33ft) long |
| C2926A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 20.0m (66ft) long |
| C3751-60201 |
HP 2 Button PS/2 Serial Mouse (Quartz Gray) - has Attached 6ft Cable with 6 Pin Mini-DIN Connector (C3751B) |
| C3751B |
HP 2 button PS/2 serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-din connector |
| C5666A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.9m (3.0ft) long |
| C5667A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 1.5m (4.9ft) long |
| C5699A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C5743A |
HP Low voltage differential/Ultra2 single-ended SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C7522A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long |
| C7532A |
HP SCSI interface cable with thumbscrews on both ends - Has 68 pin high density (M) connectors - 20.0m (65.6ft) long |
| D4282B |
HP Cable kit - Two internal SCSI cables and one adapter - Used with HP NetRAID-3si disk array controller |
| D5955-63002 |
HP Backup Battery for D5955A NetRaid Disk Array Controller |
| D6020A |
HP SCSI interface cable - Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends - 68-pin ultra high density (M) to 68-pin high density (M) - |
| D8228-69007 |
HP SCSI Cable (C65) (Twisted Pair) - From SCSI 'B' Connector on I/O Board to Secondary Hot-Swap Mass Storage Cage |
| D8228-69008 |
HP SCSI Cable (C62) (Twisted Pair) - From SCSI 'A' Connector on I/O Board to Primary Hot-Swap Mass Storage Cage |
| D8597-63001 |
HP Windows 95' Keyboard Assembly (Quartz Gray, 104 Key) - has Attached 2m Cable with 6 Pin Mini DIN Connector - USA English - Replacement for D4950B Opt ABA, C1405B, C1405C
|