| Home > HP Parts Directory > Servers > NetServer E50 ( PII/3xx ) |
 |
NetServer E50 ( PII/3xx ) |
| Part # |
|
| 5064-3691 |
HP Backplane Board - Horizontal Board in Center of Chassis - Connects to System Processor Board (2 PCI, 2 ISA, 2 Combo) |
| 5064-4633 |
HP Ultra Wide SCSI-2 Controller Board - Plugs Into Backplane PCI Slot |
| D4943-69001 |
HP NetRAID 3-Channel Disk Array Controller - PCI Board With 3 Internal 68 Pin and 2 External 68 Pin High Density Ultra Wide SCSI Connectors (D4943A) |
| D4992-69001 |
HP NetRAID-1 One-Channel Disk Array Controller - PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A) |
| D5013-63003 |
HP LAN Adapter - PCI 10/100TX LAN Board for NetServer (D5013A) |
| D5025-63001 |
HP Wide SCSI Host Adapter Board (D5025A) - Installed in PCI Socket on System Backplane Board |
| D6034-69001 |
HP System Processor Board - Has Integrated Super VGA Video Controller, IDE Controller, Floppy Controller, 2 Serial Ports and 1 Parallel Port - Plugs Into the Backplane Board |
|
|
| 5002-3876 |
HP Mounting Tray - for Mounting a 3.5in Hard Drive in 5.25in Slot in the Front of the Chassis |
| 5002-4832 |
HP Mounting Tray - for Mounting a 3.5in Hard Drive in 5.25in Slot in the Front of the Chassis |
| 5064-1984 |
HP Lower Fan Assembly - Mounts on Back Panel Next to the Rear Hard Drives |
| 5064-3614 |
HP Airflow Guide Assembly - Includes Plastic Airflow Guide, Metal Top Cover, and Cooling Fan - Mounts at Top of Chassis |
| 5064-4675 |
HP Front bezel assembly - Includes front bezel, filler panels, keylock assembly, power button, lightpipe, latch assembly, and label |
| 5064-4688 |
HP Adapter - 68-pin high density female to 50-pin female - Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device - (C5710A) |
| 5184-3872 |
HP Adapter - 68-pin high density female to 50-pin female - Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device |
|
|
| 5002-3876 |
HP Mounting Tray - for Mounting a 3.5in Hard Drive in 5.25in Slot in the Front of the Chassis |
| 5002-4832 |
HP Mounting Tray - for Mounting a 3.5in Hard Drive in 5.25in Slot in the Front of the Chassis |
| C1520H |
HP SureStore 2000e - External 2GB DDS (DAT) Drive - Single Ended Narrow SCSI-2 |
| C1521H |
HP SureStore 5000e - External 2/4GB DDS (DAT) Drive - Single Ended Narrow SCSI-2 |
| C1525H |
HP SureStore tape 2000i - 2GB narrow SCSI-2 internal DDS (DAT) drive |
| C1526H |
HP SureStore Tape 5000i - 4GB Narrow SCSI-2 Internal DDS (DAT) Drive |
| C1528H |
HP SureStore DAT 8i - 4/8GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C1529H |
HP SureStore DAT 8e - 4/8GB External DAT Drive - Single Ended Narrow SCSI-2 |
| C1555B |
HP SureStore DAT 24i - 12/24GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C4384-69350 |
HP Replacement HP SureStore T4i 4GB Internal Tape Drive - Without Resistor Packs (SIPS) (for Products D6032A / D6035A) |
| C5644A |
HP SureStore T4i Single-Ended Narrow SCSI-2 Internal 4/8GB Travan Tape Drive |
| C5644B |
HP SureStore T4i Single-Ended Narrow SCSI-2 Internal 4/8GB Travan Tape Drive |
| C5644C |
HP SureStore T4i Single-Ended Narrow SCSI-2 Internal 4/8GB Travan Tape Drive |
| D2035-60282 |
HP 1.44MB floppy disk drive (Flint Gray) - 3.5-inches, 1/3 height - (Part of D2035A/B) |
| D2677-69001 |
HP 4.3GB Ultra ATA/33 hard drive (Quantum Fireball SE43A101) - 3.5-inch, 5400RPM, 1.0-inch high - Uses the Ultra ATA/33 (IDE) controller built into the system processor board |
| D2678-69001 |
HP 2.5GB Ultra ATA/33 Hard Drive - 3.5 Inch, One Inch High (P/O D2678A) - Uses the Ultra ATA/33 Controller (IDE) Built Into the System Processor Board |
| D2678A |
HP 2.5GB Ultra ATA/33 3.5 Inch Hard Drive - One Inch High - Uses the Fast IDE Controller Built Into the System Processor Board |
| D3582C |
HP 2.1GB 'hot swap' Ultra SCSI hard drive module - Quartz Gray |
| D3583C |
HP 4.2GB 'hot swap' Ultra SCSI hard drive module - Quartz Gray |
| D3583CR |
HP 4.2GB 'hot swap' Ultra SCSI hard drive module - Quartz Gray |
| D4289A |
HP 9.1GB 'hot swap' Ultra SCSI hard drive module - Quartz Gray |
| D4383A |
HP 24X (Max) Speed IDE CD ROM Drive with Integral Loading Tray - Uses System Board IDE Controller |
| D4383B |
HP 24X (Max) Speed IDE CD ROM Drive with Integral Loading Tray Uses IDE Controller Built Into the System Processor Board |
| D4389-60091 |
HP 48x-max speed IDE CD-Rom drive (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control - Equivalent replacement for numerous 24X (max) or 32X (max) drives - |
| D4910-69001 |
HP Hard Drive - 4.2GB, 7200 RPM Ultra Wide SCSI (P/O D4910A) |
| D4910A |
HP Hard Drive - 4.2GB, 7200 RPM - Includes Attached Wide Single Ended SCSI Interface Board |
| D4910AV |
HP Hard Drive - 4.2GB, 7200 RPM - Includes Attached Wide Single Ended SCSI Interface Board |
| D4911-69001 |
HP 9.1GB, 7200 RPM Ultra Wide SCSI Hard Drive Module (P/O D4911A) |
| D4911A |
HP 9.1GB, 7200 RPM Ultra Wide SCSI Hard Drive Module |
|
|
| D4290-69003 |
HP 64MB Parity ECC FPM SIMM Memory Module - 60ns, 36 Bit (D4290A) - Must Be Installed in Sets of 2 for NetServer E-Series |
| D4290A |
HP 64MB Parity ECC FPM SIMM Memory Module (60ns, 36 Bit) - Must Be Installed in Sets of 2 for NetServer E-Series (Product Includes One SIMM) |
| D4891-63001 |
HP 16MB Parity ECC FPM SIMM Memory Module - 60ns, 36 Bit (D4891A) - Must Be Installed in Sets of 2 for NetServer E-Series |
| D4891A |
HP 16MB Parity ECC FPM SIMM Memory Module (60ns, 36 Bit) - Must Be Installed in Sets of 2 for NetServer E-Series (Product Includes One SIMM) |
| D4891AV |
HP 16MB Parity ECC FPM SIMM Memory Module (60ns, 36 Bit) - Must Be Installed in Sets of 2 for NetServer E-Series (Product Includes One SIMM) |
| D4892-69001 |
HP 32MB Parity ECC FPM SIMM Memory Module - 60ns, 36 Bit (D4892A) - Must Be Installed in Sets of 2 for NetServer E-Series |
| D4892A |
HP 32MB Parity ECC FPM SIMM Memory Module (60ns, 36 Bit) - Must Be Installed in Sets of 2 for NetServer E-Series (Product Includes One SIMM) |
| D4892AV |
HP 32MB Parity ECC FPM SIMM Memory Module (60ns, 36 Bit) - Must Be Installed in Sets of 2 for NetServer E-Series (Product Includes One SIMM) |
|
Power Supplies & Accessories |
| 5064-0778 |
HP 200W Power Supply Assembly - Selectable 100V to 127V, or 200V to 240V Ranges (50Hz to 60Hz) |
| 8120-1751 |
HP Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
|
|
| 5183-2471 |
HP Heat Sink for Pentium II Module |
| D6031-63000 |
HP Intel Pentium II processor - 333MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) - Includes heat sink |
| D6034-63003 |
HP Intel Pentium II processor - 300MHz (Klamath, 66MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) - Includes heat sink |
|
|
| 1420-0356 |
HP 3.0V battery (20mm diameter, 3.2mm thick, 220 mA-hr) - Type CR2032 lithium |
| 5062-3383 |
HP SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long |
| 5062-3386 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 2.0m (6.6ft) long |
| 5062-3386M |
HP SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 2.0m (6.6ft) long |
| 5063-1212 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 3.0m (9.8ft) long - (C2927A) |
| 5063-1213 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 5.0m (16ft) long - (C2928A) |
| 5063-1214 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 68 pin high density (M) thumbscrew - 1.0m (3.3ft) long - (C2915A) |
| 5063-1218 |
HP SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 2.5m (8.2ft) long |
| 5063-1269 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 68 pin high density (M) thumbscrew - 2.0m (6.6ft) long - (A3401A Opt 002) |
| 5064-5819 |
HP Ultra Wide SCSI-2 Cable Kit - Terminated Internal Ribbon Cable With 5 High Density 68-Pin (M) Connectors and One High Density 68-Pin (F) to 50-Pin (F) Adapter |
| 5181-7705 |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.0m (3.3ft) long - (C2961A) |
| 5181-7707 |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 2.0m (6.6ft) long - (C2906A) |
| 5181-7708 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long - (C2907A) |
| 5182-3509 |
HP Floppy Drive Ribbon Cable - Connects from the Floppy Drive to the System Processor Board |
| 5182-6736 |
HP SCSI Interface Cable - 50 Pin High Density (M) to 68 Pin High Density (M) - 2.5m (Has Thumbscrews on Both Ends) |
| 5182-9379 |
HP Fan Cable - Supplies Power From System Board to Fan |
| 5183-2104 |
HP IDE Ribbon Cable - Connects From the Primary IDE Connector on the System Processor Board to 1 or 2 Internal IDE Drives |
| 5183-2671 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long |
| 5183-3780 |
HP CD-Rom Drive Ribbon Cable - Connects From the Secondary IDE Connector on the System Processor Board to 1 or 2 CD-Rom Drives |
| 5183-7741 |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long |
| 8120-4998 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 1.0m (3.3ft) long - (92222B) |
| 8120-5159 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 2.0m (6.6ft) long - (92222C) |
| 8120-5363 |
HP Single Ended SCSI-2 Interface Cable - 50 Pin Low Density (M) With Bail Locks to 50 Pin Low Density (M) With Thumb Screws - 1.0m (K2284) |
| 8120-5548 |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long - (C2908A) |
| 8120-6147 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long - (A3401A Opt 005, C6509A) |
| 92222A |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 0.5m (1.6ft) long |
| 92222B |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 1.0m (3.3ft) long |
| 92222C |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 2.0m (6.6ft) long |
| A1658-62020 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long - (C2924A) |
| A1658-62021 |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 5.0m (16ft) long - (A3401A Opt 001, C6510A) |
| C2906A |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 2.0m (6.6ft) long |
| C2907A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long |
| C2908A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long |
| C2911A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.9m (3.0ft) long |
| C2911C |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long |
| C2915A |
HP SCSI interface cable - 50 pin low density (M) bail locks to 68 pin high density (M) thumbscrews - 1.0m (3.3ft) long |
| C2924A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C2924C |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 2.5m (8.2ft) long |
| C2927A |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 3.0m (9.8ft) long |
| C2928A |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 5.0m (16ft) long |
| C2955A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 0.5m (1.6ft) long |
| C2956A |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.5m (4.9ft) long |
| C2957A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 2.0m (6.6ft) long |
| C2958A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long |
| C2959A |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long |
| C2961A |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.0m (3.3ft) long |
| C2962A |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.5m (4.9ft) long |
| C2978A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 0.5m (1.6ft) long |
| C2978B |
HP SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 0.5m (1.6ft) long |
| C2979A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 1.5m (4.9ft) long |
| C2979B |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.5m (4.9ft) long |
| C2981A |
HP SCSI interface cable with thumbscrews on both ends - Ultra flexible 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long |
| C3726A |
HP SCSI Interface Cable - 68 Pin Ultra High Density (M) to 68 Pin High Density (M) - 1.0m (Has Thumbscrews on Both Ends) |
| C3751-60201 |
HP 2 Button PS/2 Serial Mouse (Quartz Gray) - has Attached 6ft Cable with 6 Pin Mini-DIN Connector (C3751B) |
| C3751B |
HP 2 button PS/2 serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-din connector |
| C5665A |
HP Single-ended SCSI cable - 50 pin low density (M) with bail locks to 68 pin high density (M) with thumbscrews - Has active termination in the 68 pin connector for high order |
| C5666A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.9m (3.0ft) long |
| C5667A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 1.5m (4.9ft) long |
| C5699A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C5743A |
HP Low voltage differential/Ultra2 single-ended SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| C6509A |
HP SCSI interface cable with thumbscrews on ends - 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long |
| C6510A |
HP SCSI interface cable with thumbscrews on ends - 68 pin high density (M) to 68 pin high density (M) - 5.0m (16ft) long |
| C7521A |
HP SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 5.0m (16ft) long |
| D3635A |
HP SCSI Interface Cable - 50 Pin High Density (M) to 68 Pin High Density (M) - 2.5m (Has Thumbscrews on Both Ends) |
| D3636A |
HP SCSI interface cable with thumbscrews on both ends - Highly flexible 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| D3636B |
HP SCSI interface cable with thumbscrews on both ends - Highly flexible 68 pin high density (M) to 68 pin high density (M) - 2.5m (8.2ft) long |
| D3636C |
HP SCSI interface cable with thumbscrews on both ends - Highly flexible 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 2.5m (8.2ft) long |
| D3637A |
HP SCSI Interface Cable - 68 Pin Ultra High Density (M) to 68 Pin High Density (M) - 2.5m (Has Thumbscrews on Both Ends) - Highly Flexible |
| D3637B |
HP SCSI Interface Cable - 68 Pin Ultra High Density (M) to 68 Pin High Density (M) - 2.5m (Has Thumbscrews on Both Ends) - Highly Flexible |
| D5968A |
HP Wide SCSI Cable Kit for D5025A - Internal Cable From D5025A Controller Board to Internal Drives - Contains 1 Cable for NetServer LCII and 1 Cable for NetServer E-Series |
| D6001A |
HP Narrow SCSI Cable for D5025A - 50 Pin Internal Cable Used to Connect up to 4 Narrow SCSI Drives to the D5025A Wide SCSI Host Adapter Board |
| D6020A |
HP SCSI interface cable - Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends - 68-pin ultra high density (M) to 68-pin high density (M) - |
| D8597-63001 |
HP Windows 95' Keyboard Assembly (Quartz Gray, 104 Key) - has Attached 2m Cable with 6 Pin Mini DIN Connector - USA English - Replacement for D4950B Opt ABA, C1405B, C1405C |
| K2283 |
HP Single Ended SCSI-2 Interface Cable - 50 Pin Low Density (M) With Bail Locks to 50 Pin Low Density (M) With Thumb Screws - 1.5m |
| K2284 |
HP Single Ended SCSI-2 Interface Cable - 50 Pin Low Density (M) With Bail Locks to 50 Pin Low Density (M) With Thumb Screws - 1.0m |
| K2285 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.5m (4.9ft) long |
| K2285-60001 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.5m (4.9ft) long - (K2285) |
| K2286 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.0m (3.3ft) long |
| K2286-60001 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.0m (3.3ft) long - (K2286) |
| K2294 |
HP SCSI Interface Cable - 50 Pin High Density (M) Thumbscrew to 50 Pin Low Density (M) Thumbscrew - 0.9m |
| K2295 |
HP SCSI Interface Cable - 50 Pin High Density (M) Thumbscrew to 50 Pin Low Density (M) Thumbscrew - 1.5m |
| K2296 |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long |
| K2296-60001 |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long - (K2296) |
| K2297 |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.5m (4.9ft) long |
| K2297-60001M |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.5m (4.9ft) long - (K2297)
|