| Home > HP Parts Directory > Servers > NetServer E40 ( 6/200 ) |
 |
NetServer E40 ( 6/200 ) |
| Part # |
|
| 5064-0244 |
HP Backplane Board - With 2 PCI, 2 PCI/ISA Combination, and 2 ISA Board Slots - Horizontal Board in Center of NetServer |
| D4937-69002 |
HP System Processor Board - (P6) Netserver E40 Series |
|
|
| 3160-1054 |
HP 12V DC Tubeaxial Fan Assembly (Includes Cable and Shield) - Mounts at Top Rear of Chassis |
| 5002-1946 |
HP Adapter Mounting Tray - for Mounting a 3.5in Hard Drive in One of the 5.25 inch Wide Drive Slots |
| 5064-4675 |
HP Front bezel assembly - Includes front bezel, filler panels, keylock assembly, power button, lightpipe, latch assembly, and label |
|
|
| 5002-1946 |
HP Adapter Mounting Tray - for Mounting a 3.5in Hard Drive in One of the 5.25 inch Wide Drive Slots |
| C1525G |
HP SureStore tape 2000i - 2GB narrow SCSI-2 internal DDS (DAT) drive |
| C1526H |
HP SureStore Tape 5000i - 4GB Narrow SCSI-2 Internal DDS (DAT) Drive |
| C1528H |
HP SureStore DAT 8i - 4/8GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| C1555B |
HP SureStore DAT 24i - 12/24GB Internal DAT Drive - Single Ended Narrow SCSI-2 |
| D2035-60282 |
HP 1.44MB floppy disk drive (Flint Gray) - 3.5-inches, 1/3 height - (Part of D2035A/B) |
| D4389-60091 |
HP 48x-max speed IDE CD-Rom drive (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control - Also used as equivalent replacement for numerous slower drives |
| D4884-69001 |
HP Hard Drive - 2.1GB 4500RPM, SCSI-2 Hard Disk Drive (D4884A) |
| D4963-69001 |
HP Hard Drive - 4.2GB 4500RPM SCSI-2 Hard Disk Drive (D4963A) |
|
|
| D4290-69003 |
HP 64MB Parity ECC FPM SIMM Memory Module - 60ns, 36 Bit (D4290A) - Must Be Installed in Sets of 2 for NetServer E-Series |
| D4290A |
HP 64MB Parity ECC FPM SIMM Memory Module (60ns, 36 Bit) - Must Be Installed in Sets of 2 for NetServer E-Series (Product Includes One SIMM) |
| D4890-63001 |
HP 8MB Parity ECC FPM SIMM Memory Module - 60ns, 36 Bit (D4890A) |
| D4890A |
HP 8MB Parity ECC FPM SIMM Memory Module Upgrade - 60nS, 36 Bit (Product Includes One SIMM) - Note: MUST be Installed in Pairs of the Same Size |
| D4891-63001 |
HP 16MB Parity SIMM Memory Module - 60ns, 36 Bit (D4891A) - Note: MUST be Installed in Sets of 4 Modules - Can ONLY be Intermixed with 32MB SIMM's on the Memory Board |
| D4891A |
HP 16MB Parity SIMM Memory Module Upgrade - 60nS, 36 Bit (Product Includes One SIMM) Note: MUST be Installed in Sets of 4 Modules - Can ONLY be Intermixed with 32MB SIMM's |
| D4892-69001 |
HP 32MB Parity SIMM Memory Module - 60nS, 36 Bit (D4892A) - Note: MUST be Installed in Sets of 4 Modules - Can ONLY be Intermixed with 16MB SIMM's on the Memory Board |
| D4892A |
HP 32MB Parity SIMM Memory Module Upgrade - 60nS, 36 Bit (Product Includes One SIMM) Note: MUST be Installed in Sets of 4 Modules - Can ONLY be Intermixed with 16MB SIMM's |
|
Power Supplies & Accessories |
| 5064-0778 |
HP 200W Power Supply Assembly - Selectable 100V to 127V, or 200V to 240V Ranges (50Hz to 60Hz) |
| 8120-1751 |
HP Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
|
|
| 1205-0832 |
HP Heat Sink (Black, 58.1mm X 48.0mm and 31.75mm High) - with Spring Clip - for Pin Grid Array Type Processor IC |
| 1821-3449 |
HP Intel Pentium Pro processor - 200MHz (P6, 256KB Level-2 cache) - Does not include heat sink |
|
|
| 1420-0356 |
HP 3.0V battery (20mm diameter, 3.2mm thick, 220 mA-hr) - Type CR2032 lithium |
| 5062-3383 |
HP SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long |
| 5062-3386 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 2.0m (6.6ft) long |
| 5062-3386M |
HP SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 2.0m (6.6ft) long |
| 5063-1212 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 3.0m (9.8ft) long - (C2927A) |
| 5063-1213 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 5.0m (16ft) long - (C2928A) |
| 5063-1218 |
HP SCSI interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 2.5m (8.2ft) long |
| 5182-3509 |
HP Floppy Drive Ribbon Cable - Connects from the Floppy Drive to the (FDD) Connector on the System Processor Board |
| 5182-9323 |
HP SCSI Cable - From Internal SCSI Hard Drive to the SCSI Controller Board (In a PCI Slot) |
| 5182-9379 |
HP Fan Cable - Supplies Power From System Board to Fan |
| 5183-2104 |
HP Ribbon Cable - Connects From 1 or 2 CD-Rom Drives to IDE Connector 2 on the System Processor Board |
| 5183-7741 |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long |
| 8120-4998 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 1.0m (3.3ft) long - (92222B) |
| 8120-5159 |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 2.0m (6.6ft) long - (92222C) |
| 8120-5363 |
HP Single Ended SCSI-2 Interface Cable - 50 Pin Low Density (M) With Bail Locks to 50 Pin Low Density (M) With Thumb Screws - 1.0m (K2284) |
| 8120-5548 |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long - (C2908A) |
| 92222A |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 0.5m (1.6ft) long |
| 92222B |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 1.0m (3.3ft) long |
| 92222C |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 2.0m (6.6ft) long |
| C2908A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.0m (3.3ft) long |
| C2927A |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 3.0m (9.8ft) long |
| C2928A |
HP Single-ended SCSI-2 interface cable with bail locks on both ends - 50 pin low density (M) to 50 pin low density (M) - 5.0m (16ft) long |
| C2955A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 0.5m (1.6ft) long |
| C2956A |
HP SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 1.5m (4.9ft) long |
| C2957A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 2.0m (6.6ft) long |
| C2958A |
HP Single-ended SCSI-2 interface cable with thumbscrews on both ends - 50 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long |
| C3751-60201 |
HP 2 Button PS/2 Serial Mouse (Quartz Gray) - has Attached 6ft Cable with 6 Pin Mini-DIN Connector (C3751B) |
| C3751B |
HP 2 button PS/2 serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-din connector |
| C4732-60301 |
HP Windows 95' Keyboard Assembly (Quartz Gray, 104 Key) - Has Attached 2m Cable with 6 Pin Mini DIN Connector (C4735A Option ABA, USA - English) |
| K2283 |
HP Single Ended SCSI-2 Interface Cable - 50 Pin Low Density (M) With Bail Locks to 50 Pin Low Density (M) With Thumb Screws - 1.5m |
| K2284 |
HP Single Ended SCSI-2 Interface Cable - 50 Pin Low Density (M) With Bail Locks to 50 Pin Low Density (M) With Thumb Screws - 1.0m |
| K2285 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.5m (4.9ft) long |
| K2285-60001 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.5m (4.9ft) long - (K2285) |
| K2286 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.0m (3.3ft) long |
| K2286-60001 |
HP SCSI interface cable - 50 pin low density (M) bail lock to 50 pin high density (M) latch/clip - 1.0m (3.3ft) long - (K2286) |
| K2294 |
HP SCSI Interface Cable - 50 Pin High Density (M) Thumbscrew to 50 Pin Low Density (M) Thumbscrew - 0.9m |
| K2295 |
HP SCSI Interface Cable - 50 Pin High Density (M) Thumbscrew to 50 Pin Low Density (M) Thumbscrew - 1.5m |
| K2296 |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long |
| K2296-60001 |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.0m (3.3ft) long - (K2296) |
| K2297 |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.5m (4.9ft) long |
| K2297-60001M |
HP Single-ended SCSI-2 interface cable - 50 pin high density (M) thumbscrew to 50 pin low density (M) bail lock - 1.5m (4.9ft) long - (K2297)
|