| Home > HP Parts Directory > Servers > Integrity RX2600 ( Itanium ) |
 |
Integrity RX2600 ( Itanium ) |
| Part # |
AirFlow Guide |
| A7231-04004 |
Hp Fan cage assembly (metal) - Front half of the processor airflow system |
| A7231-04034 |
Hp Main airflow guide (plastic) |
|
Bezel Kit |
| A7231-04026 |
Hp Deskside front bezel assembly (Flint Gray) |
| A7231-04030 |
Hp Left side bezel for rack configurations with latch (Flint Gray) |
|
Cable Kit |
| A7231-04018 |
Hp Power supply interface cable (module) assembly - Includes the dual power supply interface connector, the low voltage cables, and the two internal power cables terminated with line filter/power recptacle assemblies |
| A7231-63003 |
Hp Status panel cable |
| A7231-63004 |
Hp Hard drive power cable |
| A7231-63005 |
Hp Six wire (three per connector) fan 'Y' cable assembly |
| A7231-63006 |
Hp Twelve wire (six per connector) fan 'Y' cable assembly |
| A7231-63017 |
Hp SCSI cable 'A' channel - Has one connector at each end |
| A7231-63018 |
Hp SCSI cable 'B' channel - Has one connector at each end |
| A6064-63001 |
Hp Converter dongle - Short cable with a (M) DVI-I connector and a (F) 15-pin VGA connector - For connecting a VGA monitor to a DVI-I port on the graphics card |
|
Cage |
| A7231-04006 |
Hp PCI/AGP card cage - Includes the metal frame and cover (PC board NOT included) |
|
Conversion Kit |
| A6940A |
Hp Pedestal configuration kit - Includes pedestal, front bezel, top cover, side cover, and nameplate - For converting the rack mount server into a deskside pedestal configuration |
|
Cover |
| A7231-00072 |
Hp ECI Cover plate - Gray metal plate approximately 1.0-inches wide by 6.75-inches long |
| A7231-04036 |
Hp Deskside side cover (Quartz Gray) |
| A7231-40021 |
Hp Deskside top cover |
|
Drive/ Accessory |
| A6538-69003 |
Hp 36GB 'hot swap' Ultra 160 Low Voltage Differential SCSI hard drive module - 10,000 RPM, low profile |
| A6538-67002 |
Hp New part for A6538-69003 |
| A6539-69002 |
Hp 73GB hot-swap Ultra 160 Low Voltage Differential (LVD) SCSI hard drive module - 10,000 RPM, low profile |
| A6539-60001 |
Hp New part for A6539-69002 |
| A6986-69001 |
Hp IDE slim form CD-RW/DVD-ROM combination drive (Flint Gray) - 12X-max write, 8X-max rewrite, 24X-max read CD, 8X-max read DVD |
| A6986-62001 |
Hp New part for A6986-69001 |
| A7231-69011 |
Hp 8x-max read DVD, 24x-max read CD-Rom IDE slim form factor DVD-ROM drive (Gray) |
| A7231-62011 |
Hp New part for A7231-69011 |
| A7231-69012 |
Hp Slimline DVD-ROM drive (Carbon Black) - 8X read DVD-ROM, 24X read CD-Rom |
| A7231-62012 |
Hp New part for A7231-69012 |
| A7231-69014 |
Hp Slimline DVD-ROM/CD-RW combination drive (Carbon Black) - 12X CD-R write, 8X CD-RW re-write, 24X read CD-Rom, 8X read DVD-ROM |
| A7835-69001 |
Hp 36GB Ultra160 Wide LVD hot-plug SCSI hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A7837-69002 |
Hp 73GB Ultra160 Wide SCSI LVD 'Hot Pluggable' hard drive (Carbon Black) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A7837-64001 |
Hp New part for A7837-69002 |
| A6980A |
Hp 36GB Ultra160 Wide SCSI LVD 'Hot Plug' hard drive - 10000 RPM, low profile, 80-pin SCA connector |
| A6981A |
Hp 36GB hot-plug Ultra320 LVD SCSI hard drive - 15,000 RPM, low profile - Includes hot-swap drive tray |
| A6982A |
Hp 73GB Ultra160 Wide SCSI LVD 'Hot Plug' hard drive - 10000 RPM, low profile, 80-pin SCA connector |
| A6985A |
Hp Slimline DVD-ROM drive (Gray) - 8X DVD-ROM read, 24X CD-Rom read |
| A6986A |
Hp Slimline DVD-ROM/CD-RW drive (Gray) - 12X CD-R write, 8X CD-RW re-write, 24X CD-Rom read, 8X DVD-ROM read |
| A7835A |
Hp 36GB Ultra160 Wide SCSI LVD 'Hot Pluggable' hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Comes mounted in Carbon Black drive carrier |
| A7836A |
Hp 36GB Ultra320 Wide SCSI LVD 'Hot Pluggable' hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Comes mounted in Carbon Black drive carrier |
| A7837A |
Hp 73GB Ultra160 Wide SCSI LVD 'Hot Pluggable' hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector - Comes mounted in Carbon Black drive carrier |
| A7850A |
Hp IDE DVD-ROM drive - 8X-max read DVD, 24X-max read CD-Rom, slimline form factor - With Carbon Black faceplate |
| A7851A |
Hp IDE CD-RW/DVD-ROM drive - 12X-max write, 8x-max re-write, 8X-max read DVD, 24X-max read CD-Rom, slimline form factor -With Carbon Black faceplate |
|
Fan |
| A7231-04015 |
Hp Thin 80mm fan |
| A7231-04033 |
Hp 80mm dual fan |
|
Filler |
| A7231-40026 |
Hp Slimline optical drive bay filler panel (Gray plastic) |
| A7231-40027 |
Hp Slimline optical drive bay filler panel (Carbon Black plastic) |
|
Graphics |
| A7226A |
Hp ATI FireGL4 graphics card - Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital dispay outputs, and one 3-pin mini DIN stereo output - Requires one AGP and one adjacent PCI slot - For Windows and HP-UX |
| A7806A |
Hp NVIDIA Quadro2 EX graphics card (NV11GL based) - Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output - Requires one APG Slot - For Windows and Linux operating systems |
| A8049A |
Hp ATI RADEON 7000 2D graphics card - Professional 2D graphics board with 32MB DDR SDRAM memory, 300MHz RAMDAC, one analog monitor output, and one DVI-I analog/digital dispay output - Requires one AGP slot |
| A8064A |
Hp NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) - High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output - Requires one APG Slot - For Windows and Linux operating systems |
|
Interface |
| A5159A |
Hp Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter - Has two external very high density 68-pin connectors and two internal high density 68-pin connectors - For HP-UX operating system |
| A5506B |
Hp 100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A6828A |
Hp Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6828AR |
Hp Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6829A |
Hp Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6829AR |
Hp Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6847A |
Hp 1000Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A6875A |
Hp Management processor board - For controlling the system console, reset and power management functions - Includes SIO (remote, console and UPS), VGA and LAN connectors - NOT supported in tower configurations |
| A8084A |
Hp FireWire (IEEE-1394A) adapter - 3-port |
| A8685A |
Hp 1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector - Requires one PCI slot - For HP-UX operating system |
| B5509BA |
Hp 100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot - Includes the board, software, software license, and installation instructions - For HP-UX operating system |
| P3492A |
Hp 10/100Base-T IPSec (3DES) LAN host adapter board - With one RJ-45 connector - Reqires one PCI slot - For Windows and Linux operating systems |
|
Keyboard |
| A7861-65303 |
Hp USB keyboard with PC-105 layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (German) |
| A7861-65305 |
Hp USB keyboard with PC-105 layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (French) |
| A7861-65313 |
Hp USB keyboard with PC-105 layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (UK-English) |
| A7861-65321 |
Hp USB keyboard with PC-106 layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (Korean) |
| A7861-65323 |
Hp USB keyboard with PC-104 layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (Traditional Chinese) |
| A7861-65342 |
Hp USB keyboard with PC-104 layout (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector (International-English) |
|
Latch |
| A7231-04023 |
Hp Right side rack latch - 'L' shaped metal bracket |
|
Memory |
| A6746-69001 |
Hp 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6834-69001 |
Hp 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6834-60001 |
Hp New part for A6834-69001 |
| A7840A |
Hp 512MB DDR-SDRAM memory upgrade kit - Includes two 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A7841A |
Hp 1.0GB DDR-SDRAM memory upgrade kit - Includes two 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A7842A |
Hp 2.0GB DDR-SDRAM memory upgrade kit - Includes two 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
|
Mouse |
| A4983-65111 |
Hp USB 3-button mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
|
Nameplate/Logo |
| A7231-40025 |
Hp Deskside nameplate (Flint Gray) |
|
PC Board |
| A7231-66530 |
Hp PCI backplane/riser board - Has four PCI slots |
| A7231-69512 |
Hp System processor board (Does NOT include the processor or processor power module) |
| A7231-66510 |
Hp New part for A7231-69512 |
| A7784A |
Hp Audio sound card - Provides 16-bit stereo mic in, headphone out, line in, line out - Requires one PCI slot Includes the audio card, stereo headphones, and internal audio cable - For Windows or HP-UX operating systems - For HP-UX operating system |
| AB620-60502 |
Hp Audio sound card - Provides 16-bit stereo mic in, headphone out, line in, line out - Requires one PCI slot - For HP-UX operating system |
| A7226-69520 |
Hp ATI FireGL4 graphics card - Extreme 3D graphics board with 128MB DDR SDRAM memory, 300MHz/30-bit palette RAMDAC, Dual DVI-I digital dispay outputs, and one 3-pin mini DIN stereo output - Requires one AGP and one adjacent PCI slot |
| A7226-60520 |
Hp New part for A7226-69520 |
| A7806-69510 |
Hp NVIDIA Quadro2 EX graphics card (NV11GL based) - Entry 3D graphics board with 32MB SDR SDRAM, 350MHz RAMDAC, and one DB-15 analog monitor output - Requires one APG slot |
| A7806-60510 |
Hp New part for A7806-69510 |
| A8064-69520 |
Hp NVIDIA Quadro4 900 XGL AGP 4X graphics card (NV25GL based) - High-end 3D graphics board with 128MB DDR SDRAM, Dual 350MHz RAMDAC, and Two DVI-I analog/digital output - Requires one APG slot - For Windows and Linux operating systems |
| A8064-66520 |
Hp New part for A8064-69520 |
| A5159-69001 |
Hp Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter - Has two external very high density 68-pin connectors and two internal high density 68-pin connectors - For HP-UX operating system |
| A5159-60001 |
Hp New part for A5159-69001 |
| A5506-69102 |
Hp 100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one PCI slot - For HP-UX operating system |
| A5506-60102 |
Hp New part for A5506-69102 |
| A6828-60101 |
Hp Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector |
| A6847-67101 |
Hp 1000 Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one PCI slot |
| P3492-63000 |
Hp 10/100Base-T PCI network interface card with IPSec (3DES) - For Windows and Linux based systems |
|
Pedestal |
| A7231-04028 |
Hp Pedestal for supporting the chassis in a deskside/tower configuration |
|
Power Cord |
| 8120-1351 |
Hp Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1378 |
Hp Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Hp Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-2104 |
Hp Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
| 8120-8376 |
Hp Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
|
Power Supply |
| A6874A |
Hp Hot-swap redundant power supply - 650W |
| A6874-69000 |
Hp Hot-swap redundant power supply - 650W |
| A6874-63000 |
Hp New part for A6874-69000 |
|
Processor |
| A7231-69130 |
Hp Intel Itanium 2 processor - 1.0GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache) - Mounts on the system processor board |
| A7231-62030 |
Hp New part for A7231-69130 |
| A7231-69139 |
Hp Intel Itanium 2 processor - 900MHz (McKinley, 400MHz front side bus, 1.5MB Level-3 cache) |
| A7231-62039 |
Hp New part for A7231-69139 |
| A7845A |
Hp Intel Itanium 2 processor upgrade - Includes one 900MHz (200MHz front side bus, 1.5MB cache) processor |
| A7848A |
Hp Intel Itanium 2 processor upgrade - Includes one 1.0GHz (200MHz front side bus, 3MB cache) processor |
|
Rack Mount Kit |
| A6939A |
Hp Field rack mount kit - For field integration into 19-inch wide cabinets at customer location - Includes rails and bezel |
|
Status Panel |
| A7231-66550 |
Hp Status panel PC board - Includes the system status LED's and power switch on a small PC board |
|
Tool |
| A7231-67046 |
Hp 2.5mm hex tool - For removing or installing a replacement processor/heatsink assembly
|