| Home > HP Parts Directory > Servers > Integrity RP7420 |
 |
Integrity RP7420 |
| Part # |
Airflow Guide |
| A6913-67005 |
Hp Processor cell board air flow baffle |
|
Bezel |
| A6912-04010 |
Hp Front status panel display bezel - Does not include status panel |
| A7025-04001 |
Hp Front bezel (Graphite) - Does not include nameplate |
| A7025-04002 |
Hp Front status panel display bezel - Does not include status panel |
|
Bracket |
| A6752-00123 |
Hp AC cord retention bracket |
|
Cable |
| A6093-63025 |
Hp Chassis intrusion switch cable |
| A6144-63001 |
Hp Management processor M-cable |
| A6752-63019 |
Hp SCSI cable bundle assembly |
| A6752-67019 |
Hp Mass storage power cable #1 |
| A6752-67020 |
Hp Mass storage power cable #2 |
| A6752-67021 |
Hp DVD-ROM drive power cable |
| A6752-67022 |
Hp Front and rear hot-swap system fans power cable |
| A6752-67023 |
Hp Hot-swap PCI fans power cable |
| A6752-67025 |
Hp Main system power harness |
| AB297-63001 |
Hp PCI OLR ribbon cable |
|
Cover |
| A7027-67001 |
Hp Side and top covers kit (Graphite) - Includes top, right side, and left side covers |
|
Drive |
| A9896-69001 |
Hp 36GB hot-plug Ultra320 LVD SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high - Includes hot-swap drive tray |
| A9896-64001 |
Hp New part for A9896-69001 |
| A9897-69001 |
Hp 73GB hot-plug Ultra320 LVD SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high - Includes hot-swap drive tray |
| A9897-64001 |
Hp New part for A9897-69001 |
| A9898-69002 |
Hp 146GB hot-plug Ultra320 LVD SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high - Includes hot-swap drive tray |
| A9898-64001 |
Hp New part for A9898-69002 |
| C5686-69204 |
Hp 20/40GB Ultra Wide Low Voltage Differential/Single-Ended (LVD/SE) SCSI-2 DDS-4 internal drive (Carbon) - 5.25-inch form factor, half-height |
| C5686-67204 |
Hp New part for C5686-69204 |
| A9878A |
Hp 20/40GB Ultra Wide Low Voltage Differential/Single-Ended (LVD/SE) SCSI-2 DDS-4 DAT drive (Carbon) - 5.25-inch form factor, half-height |
| A9879A |
Hp IDE DVD-ROM drive - 5.25-inch form factor |
| A9880A |
Hp 36GB hot-plug Ultra320 LVD SCSI hard drive (Carbon) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high - Includes hot-swap drive tray |
| A9881A |
Hp 73GB hot-plug Ultra320 LVD SCSI hard drive (Carbon) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high - Includes hot-swap drive tray |
| A9882A |
Hp 146GB hot-plug Ultra320 LVD SCSI hard drive (Carbon) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high - Includes hot-swap drive tray |
|
Fan |
| A6436-67001 |
Hp RISC processor cooling fan |
| A6752-67029 |
Hp Front/rear hot-swap smart fan assembly |
|
Filler |
| A6198-60003 |
Hp Hot-swap hard drive slot filler panel (Carbon Black) |
| A6752-04017 |
Hp Core I/O slot filler panel |
| A6912-00014 |
Hp DVD-ROM drive slot filler panel (Carbon) |
| 5001-6892 |
Hp Filler for empty PCI slot |
|
Handle |
| A6752-04045 |
Hp Lift handle assembly (left) |
| A6752-04048 |
Hp Lift handle assembly (right) |
|
Interface |
| A3739B |
Hp Dual fiber distributed data interface (FDDI) adapter - Has a dual-attach connection to a FDDI - With two SC duplex-style keyed connectors |
| A5230A |
Hp 100Base-TX PCI LAN adapter with one RJ-45 port |
| A5506B |
Hp 100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A5513A |
Hp 155Mb/s ATM PCI LAN adapter with MMF connectors |
| A5783A |
Hp Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board |
| A5838A |
Hp Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter - Has two RJ-45 LAN ports and two external 68-pin very high density connectors |
| A6386A |
Hp HyperFabric2 PCI 4X fiber adapter interface and switch - For HP-UX operating system |
| A6748A |
Hp 8-port MUX PCI Multiplexer interface board - Speeds up to 230,400 bps per port, 33MHz bus speed - Occupies one PCI slot - For HP-UX operating system |
| A6749A |
Hp 64-port MUX PCI Multiplexer interface board |
| A6795A |
Hp 2Gbps Tachyon XL2 PCI Fibre Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6825A |
Hp 1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A6828A |
Hp Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6829A |
Hp Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6847A |
Hp 1000Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A9918A |
Hp Hot-swap core I/O board - Has one parallel and one RJ-45 LAN connector and many status LEDs |
| J3525A |
Hp WAN adapter - Two port X.25 PCI frame relay adapter card |
| A6093-40041 |
Hp PCI OLR gate (latch) - Secures the PCI card and enables the PCI slot |
| A6093-67114 |
Hp PCI OLR latching assembly - Disables PCI slots for hot-swap functionality and retains the PCI cards - Includes four OLR housings, 16 OLR buttons, PC board, 16 OLR paddles, and OLR switch cable |
|
Memory |
| A5198-69101 |
Hp 512MB high-density SyncDRAM DIMM memory |
| A6098-69101 |
Hp 1GB high-density SDRAM DIMM (single DIMM) |
| A6098-60101 |
Hp New part for A6098-69101 |
| A6100-69001 |
Hp 2GB high-density SDRAM DIMM |
| A6100-67001 |
Hp New part for A6100-69001 |
| AB322-69001 |
Hp 4GB high-density SDRAM DIMM (four 1GB DIMMs) |
| AB322-67001 |
Hp New part for AB322-69001 |
| AB307A |
Hp 2.0GB SDRAM DIMM memory module upgrade kit - Includes a pair of 1GB high-density SDRAM DIMMs |
| AB308A |
Hp 4.0GB SDRAM DIMM memory upgrade kit - Includes four 1GB high-density SDRAM DIMMs |
| AB309A |
Hp 8.0GB SDRAM DIMM memory module upgrade kit - Includes four 2GB high-density SDRAM DIMMs |
| A7025-40003 |
Hp Nameplate for rp7420 (Graphite) |
| A6093-69113 |
Hp PCI-X card cage assembly - Includes the PCI-X I/O board, PCI card separators, metal card cage with fan frame |
| A6093-60013 |
Hp New part for A6093-69113 |
| A6752-67044 |
Hp Hot-swap backplane - Has four hot-swap drive connectors |
| A6752-69001 |
Hp System backplane - Has slots for cell boards and core I/O boards and connectors for system cables - Mounts vertically on the left side of the system |
| A9918-69001 |
Hp Hot-swap core I/O board - Has one parallel and one RJ-45 LAN connector and many status LEDs |
| AB595A |
Hp New part for A9918-69001 |
|
PC Board |
| A6794-69001 |
Hp LAN/SCSI core I/O PCI board (Procurium) |
| A6794-60001 |
Hp New part for A6794-69001 |
|
Pedestal |
| A9903A |
Hp Pedestal configuration kit - Includes parts needed to convert from rack mount to pedestal |
|
Power Cord |
| 8120-6895 |
Hp Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has a stripped end for power input and straight C19 (F) receptacle for power output |
| 8120-6897 |
Hp Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has IEC-309 (M) plug for power input and straight (F) C19 receptacle (for 220V in Denmark and Switzerland) |
| 8120-6903 |
Hp Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (for the United States, Canada, and Japan) - (E7803A) |
| 8120-8494 |
Hp Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (for 240VAC in North America) - (E7803A) |
|
Power Supply |
| A6093-69123 |
Hp PCI power supply module - Hot-swap power module for the PCI backplane - Power module slots located on the front above the fans |
| 0950-3819 |
Hp New part for A6093-69123 |
| A6752-69113 |
Hp Hot-swap redundant power supply module |
|
Processor Upgrade |
| A6436A |
Hp PA-RISC processor upgrade kit - Includes two 900MHz PA-RISC 8800 dual core processors and attached heat sink with fan |
| A6437A |
Hp PA-RISC processor upgrade kit - Includes one 1.0GHz PA-RISC 8800 dual core processor and attached heat sink with fan |
| A6913A |
Hp Processor and memory cell board - Does not include processors or memory (Rp74/84, rx76/86 cpu) |
|
Rack Mount Kit |
| J1530A |
Hp Field rack mount kit for rpXXXX series servers |
|
Rail Kit |
| A6752-67011 |
Hp CD/DVD-ROM drive mounting rail |
|
Separator |
| 5065-7443 |
Hp PCI card separator with light pipe |
|
Status Panel |
| A6752-67005 |
Hp Front display panel - Has seven activity LEDs, power button, metal mounting bracket, and 36.8cm (14.5in) long ribbon cable |
|
Switch |
| 5040-6317 |
Hp Chassis intrusion switch |
|
Terminal |
| C1099A |
Hp Alphanumeric terminal console for HP3000/9000 systems |
|
Terminator |
| A6912-60001 |
Hp Processor terminator |
|
Tool |
| A5201-68004 |
Hp Anti-static mat, 24in x 36in with grounding strap |
|
Voltage Regulator |
| 0950-4122 |
Hp Low voltage DC to DC conterter (low voltage VRM) |
| 0950-4123 |
Hp High voltage DC to DC conterter (high voltage VRM)
|
0 items