| Home > HP Parts Directory > Servers > Integrity 9000 ( Superdome ) |
 |
Integrity 9000 ( Superdome ) |
| Part # |
Battery |
| 1420-0386 |
Hp 3.0V battery - 250mAh, lithium coin cell battery - Type CR2330 or equivalent - Not rechargeable - Used on the cell board |
| 1420-0862 |
Hp 3.0V battery - 1.3Ah, photo lithium (LiMnO2) cell - Type CR123A or equivalent - Not rechargeable - Used on the single board computer hub (SBCH) |
|
Bezel Kit |
| A5201-04017 |
Hp Rear control panel bezel kit |
|
Bracket |
| A5201-00268 |
Hp Blower side panel lock bracket |
| A5201-00431 |
Hp Front door opening limiter bracket - Limits how far the door can open |
|
Bumper |
| 0403-0549 |
Hp Rubber bumper for the front and rear doors |
|
Bus Bar |
| A5201-00471 |
Hp 48V distribution to cell board bus bar |
|
Cabinet |
| A4901A |
Hp Rack System/E33 cabinet - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, and leveling feet |
| A4902A |
Hp Rack System/E41 cabinet - 1.95m 19in 41U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, leveling feet |
|
Cable |
| A5201-04027 |
Hp Backplane to backplane flex cable, 12.7cm (5in) long - Includes attaching hardware |
| A5201-04039 |
Hp Backplane to backplane flex cable, 5.1cm (2in) long - Includes attaching hardware |
| A5201-63007 |
Hp 48VDC board to left system backplane sensor cable |
| A5201-63014 |
Hp I/O fan control power harness |
| A5201-63016 |
Hp Main blower control power harness |
| A5201-63020 |
Hp Utilities board to master I/O backplane 500MHz clock cable |
| A5201-63028 |
Hp House keeping power board to utilities connector board cable |
| A5201-63041 |
Hp Front display panel cable |
| A5201-63044 |
Hp House keeping power to master I/O backplane rear cable |
| A5201-63046 |
Hp Front end power supply to power filter cable |
| A5201-63049 |
Hp Cell LED assembly cable |
| A5201-63051 |
Hp 48VDC power board to I/O feed cable |
| A5201-63053 |
Hp Utilities-2 cable |
| A5201-63059 |
Hp On-Off switch to front power board cable |
| A5201-63065 |
Hp Front door to chassis ground cable |
| A5201-63066 |
Hp Ring I/O adapter cable, 2.1m (82in) long |
| A6827A |
Hp Superdome to I/O expansion cabinet shielded clock cable |
| C2978B |
Hp SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 0.5m (1.6ft) long |
| C7520A |
Hp SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) with inline termination - 5.0m (16ft) long |
| C7556A |
Hp SCSI interface cable - 68-pin high density (M) thumbscrew to 68-pin very high density (M) - 10m (32.8ft) long |
|
Cage |
| A4856-69101 |
Hp PCI card cage assembly - Includes 12-slot I/O chassis, I/O board, I/O power board, and I/O backplane |
| A4856AX |
Hp PCI 12-Slot Card Cage Assembly |
|
Caster |
| 1492-0310 |
Hp Wheel and caster assembly - 3in diameter |
|
Catch |
| A5201-00279 |
Hp Rear door latch catch |
|
Chassis |
| A6864-69101 |
Hp PCI-X card cage assembly - Includes the 12 slot I/O chassis with GIXOB, GPCIXP, GPCIXPB2, and REO ASIC |
| A6864AX |
Hp 12 Slot PCI-X I/O Card Chassis |
|
Computer |
| A5570B |
Hp rp2450 server used for the support management station |
|
Connector |
| A6440A |
Hp In-line power connector - OPT. 401, 200-240VAC, 60/63Amp, 3 phase, 4-wire - OPT. 501, 200-240VAC, 30/32Amp, 3 phase, 5-wire |
| 1253-5311 |
Hp Power distribution control assembly (PDCA) in-line connector - 200-240VAC, 30/32amp, 3 phase, 5-wire |
|
Cover |
| A5201-00261 |
Hp Middle back kicker cover |
| A5201-00281 |
Hp Right back kicker cover |
| A5201-04018 |
Hp Blower front cover panel |
| A5201-04020 |
Hp Cabinet side cover panel without vertical lip |
| A5201-04031 |
Hp Cabinet side cover panel with vertical lip |
| A5201-04045 |
Hp Cabinet right side cover panel with IOX cable access cutouts |
| A5542-40001 |
Hp Cabinet side cover cable access block off plate |
| 1200-4446 |
Hp Dust cover for the backplane flex cable socket |
| A6830A |
Hp I/O expansion cabinet side cover kit - Includes two side panels and one EMI panel |
|
Door |
| A5201-04041 |
Hp Front door metal frame |
| A5201-40006 |
Hp Front door bottom section |
| A5212AZ |
Hp Rear door for rack system E33 |
| A5213AZ |
Hp Rear door for rack system E41 |
|
Drive |
| C7497A |
Hp DAT40m - 20/40GB DDS-4 tape drive module |
| C7497AR |
Hp DAT40m - 20/40GB DDS-4 tape drive module |
| C7499A |
Hp SureStore DVDm DVD-ROM drive module |
| C7499AR |
Hp SureStore DVDm DVD-ROM drive module |
|
Enclosure |
| C7508AZ |
Hp SureStore tape array enclosure 5300 - Holds four devices |
| C7508AZR |
Hp SureStore tape array enclosure 5300 - Holds four devices |
| A5862A |
Hp I/O chassis enclosure for the 12-slot PCI or PCI-X chassis |
|
Extended I/O |
| A4856A |
Hp 12 slot PCI I/O card chassis for Superdome cabinet |
| A4856AZ |
Hp 12 slot PCI I/O card chassis for rack system expansion cabinet |
| A5861A |
Hp I/O expansion power and utilities subsystem |
| A5861D |
Hp I/O expansion power and utilities subsystem (Graphite) - For the I/O expansion cabinet |
| A6864A |
Hp 12 slot PCI-X I/O card chassis for Integrity Superdome with Itanium 2 processors |
|
Extension |
| A5542AZ |
Hp Cabinet depth extension kit for rack system E33 |
| A5543AZ |
Hp Cabinet depth extension kit for rack system E41 |
|
Fan |
| A5201-69011 |
Hp Blower module - Includes one blower and mounter hardware - Mounts on top of the chassis |
| A5201-62032 |
Hp Blower Module |
|
Filler |
| A5201-00440 |
Hp Power distibution control assembly (PDCA) slot filler panel |
| A6866-04010 |
Hp Cell slot filler panel (air blocker) - Fills an empty cell slot to provide proper air flow for cooling |
| A5201-00371 |
Hp Rear door air filter |
| A5201-00397 |
Hp Front door air filter |
| 3150-0785 |
Hp Vacuum filter, 0.03 micron |
| A5201-67067 |
Hp 48V filter assembly - Includes attaching hardware |
|
Foot |
| A5201-70001 |
Hp Leveling foot (4) kit - Includes brackets, adjusters, feet, and 16 screws |
|
Frame |
| A5201-04005 |
Hp I/O fan mounting frame |
|
Ground Strap |
| 9300-2481 |
Hp Static wrist strap with 3.7m (12ft) cord |
|
Guide |
| A5201-00144 |
Hp PCI chassis guide |
|
Hardware |
| 0380-4735 |
Hp Hex standoff - 16mm long, M3.0 x 0.5 thread - Stainless steel |
| 0515-0824 |
Hp Socket head cap screw - M10 x 1.5, 80mm long |
| A5201-04024 |
Hp Rear door hinge |
|
Housing |
| A5201-62030 |
Hp Front blower housing - Does not include the blower |
|
Interface |
| A3738A |
Hp 10Base-T/100Base-TX PCI LAN adapter - Has AUI, BNC, and RJ-45 connectors |
| A3739B |
Hp Dual fiber distributed data interface (FDDI) adapter - Has a dual-attach connection to a FDDI - With two SC duplex-style keyed connectors |
| A4800A |
Hp Single port PCI fast/wide differential (FWD) SCSI-2 adapter - Has one external high density 68 pin connector and one internal high density 68 pin connector |
| A4926A |
Hp LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| A4929A |
Hp LAN adapter - 1000Base-T PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| A5149A |
Hp PCI Ultra2 Low Voltage Differential SCSI adapter - Has one external very high density 68 pin connector with thumbscrews and one internal high density 68 pin connector with latch/clips |
| A5149AR |
Hp PCI Ultra2 Low Voltage Differential SCSI adapter - Has one external very high density 68 pin connector with thumbscrews and one internal high density 68 pin connector with latch/clips |
| A5158A |
Hp Single port Tachyon TL PCI 2x fiber channel adapter |
| A5159A |
Hp Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter - Has two external very high density 68-pin connectors and two internal high density 68-pin connectors - For HP-UX operating system |
| A5210A |
Hp PCI core I/O card - Has one 10/100Base-T LAN (device 1) and three RS-232 serial ports (device 0) |
| A5230A |
Hp 100Base-TX PCI LAN adapter with one RJ-45 port |
| A5483A |
Hp 622Mb/s ATM PCI LAN adapter with MMF connectors |
| A5486A |
Hp HP SpeedCard - PCI accelerator board for public key cryptography |
| A5506B |
Hp 100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A5513A |
Hp 155Mb/s ATM PCI LAN adapter with MMF connectors |
| A5515A |
Hp 155Mb/s ATM PCI UTP5 LAN adapter with MMF connectors |
| A5783A |
Hp Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board |
| A5801A |
Hp PCI serial HIPPI 800 adapter |
| A5838A |
Hp Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter - Has two RJ-45 LAN ports and two external 68-pin very high density connectors |
| A6092A |
Hp HyperFabric PCI 4X fiber adapter interface |
| A6386A |
Hp HyperFabric2 PCI 4X fiber adapter interface and switch - For HP-UX operating system |
| A6748A |
Hp HP 8-port MUX PCI Multiplexer interface board - Speeds up to 230,400 bps per port, 33MHz bus speed - Occupies one PCI slot - For HP-UX operating system |
| A6749A |
Hp HP 64-port MUX PCI Multiplexer interface board |
| A6795A |
Hp 2Gbps Tachyon XL2 PCI Fibre Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6795AR |
Hp 2Gbps Tachyon XL2 PCI Fibre Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6865A |
Hp PCI core I/O card - Has one 10/100Base-T LAN (device 1) and three RS-232 serial ports (device 0) |
| J3525A |
Hp WAN adapter - Two port X.25 PCI frame relay adapter card |
| J3526A |
Hp WAN adapter - Four port X.25 frame relay adapter card |
|
Label |
| A5201-84056 |
Hp Superdome cabinet power rating label |
| A5201-67068 |
Hp PCI card cage label kit |
|
Latch |
| A5201-00258 |
Hp Front door latch keeper |
|
Manual Kit |
| A5207A |
Hp I/O and networking documentation kit - Includes one copy of all documentation associated with each type of I/O and Networking card |
|
Memory |
| A5198-69101 |
Hp 512MB high-density SyncDRAM DIMM memory |
| A5198A |
Hp 2GB memory upgrade kit - Includes four 512MB SDRAM DIMM modules |
| A6863A |
Hp 4GB memory upgrade kit - Includes four 1024MB SDRAM DIMM modules |
|
Mount |
| A5201-04034 |
Hp Power distribution control assembly (PDCA) mount - Enclosure for two PDCA's and 10 cable groomers |
|
PC Board |
| A5201-67002 |
Hp Front and rear panel board (FPB2) |
| A5201-69012 |
Hp Single board computer hub (SBCH) |
| A5201-60118 |
Hp Single Board Computer Hub (SBCH) |
| A5201-69113 |
Hp Module assembly - Includes single board computer (SBC) and single board computer hub (SBCH3) |
| A5201-62128 |
Hp Module Assembly |
| A5201-69302 |
Hp Right system backplane (RSB2) - Includes the RSB, four XBC (TOGO), and six ASICS covers |
| A5202AX |
Hp Right System Backplane (RSB2) |
| A5201-69401 |
Hp Left system backplane (LSB3) - Includes the LSB, four XBC (TOGO), and six ASICS covers |
| A5201AX |
Hp Left System Backplane (LSB3) |
| A6113-69102 |
Hp Dome light backplane (DLB2), 16-way - Includes the DLB, two XBC (TOGO), and ASICS covers |
| A6113AX |
Hp 16-Way Dome Light Backplane (DLB2 |
| A6865-69001 |
Hp Core I/O board - For the PCI-X chassis |
| A5210-60401 |
Hp New Core I/O Board |
| 0960-2197 |
Hp Modem board - 56K, V.92/V.44 data/fax |
|
Panel |
| A5201-04050 |
Hp Cable exit EMI panel - Include cable clamps |
|
Power Cord |
| 5184-0875 |
Hp Power cord - 2.0m (6.6ft) long (For 240VAC in the United Kingdom) - For use with the 220/240VAC Vacuum |
|
Power Module |
| A5201-69003 |
Hp Backplane power module |
| A5201-60103 |
Hp Backplane Power Module |
| A5201-69008 |
Hp Power distribution control assembly - 200-240VAC, 60amp, 3 phase, 5-wire, phase to neutral |
| A5201-62014 |
Hp Power Distribution Control Assembly (200-240VAC, 60amp, 3 Phase, 5-Wire, Phase-to-Neutral) |
| A5201-69009 |
Hp Power distribution control assembly - 200-240VAC, 100amp, 3 phase, 4-wire, phase to phase |
| A5201-62013 |
Hp Power Distribution Control Assembly (200-240VAC, 100amp, 3 Phase, 4-Wire, Phase-to-Phase) |
| A5201-69015 |
Hp Power distribution control assembly - 200-240VAC, 100amp, 3 phase, 4-wire, phase to phase - Includes power cord, plug, and receptacle |
| A5201-62026 |
Hp Power Distribution Control Assembly (200-240VAC, 100amp, 3 Phase, 4-Wire, Phase-to-Phase) |
| A5201-69016 |
Hp Power distribution control assembly - 200-240VAC, 60amp, 3 phase, 5-wire, phase to neutral - Includes power cord, plug, and receptacle |
| A5201-62027 |
Hp Power Distribution Control Assembly (200-240VAC, 60amp, 3 Phase, 5-Wire, Phase-to-Neutral) |
| A5201-69023 |
Hp Power distribution control assembly - 200-240VAC, 63amp, 3 phase, 4-wire, phase to phase - Includes power cord, plug, and receptacle |
| A5201-62036 |
Hp Power Distribution Control Assembly (200-240VAC, 63amp, 3 Phase, 4-Wire, Phase-To-Phase) |
| A5201-69024 |
Hp Power distribution control assembly - 200-240VAC, 32amp, 3 phase, 5-wire, phase to neutral - Includes power cord, plug, and receptacle |
| A5201-62037 |
Hp Power Distribution Control Assembly (200-240VAC, 32amp, 3 Phase, 5-Wire, Phase-To-Neutral) |
| A6866-69001 |
Hp Cell power board - For Itanium processor cells only |
| A6866AX |
Hp Integrity SuperDome Cell Power Board (Does NOT Include Processors or Memory) |
|
Power Supply |
| A5800A |
Hp PDCA redundant power source - OPT. 006, 200-240VAC, 3 phase, 4-wire with 8 guage power cord - OPT. 007, 200-240VAC, 3 phase, 5-wire with 12 guage power cord |
| A5201-69007 |
Hp Front end power system assembly |
| A5201-62025 |
Hp Front End Power System Assembly |
|
Processor |
| A5206-69004 |
Hp SuperDome cell board assembly - Cell board mounted on metal tray, has four PA-RISC PA8600, 500MHz processors and 32 DIMM slots - Does not include memory |
| A5206BX |
Hp SuperDome Cell Board Assembly (Does Not include Memory) |
| A6445-69003 |
Hp SuperDome cell board assembly - Cell board mounted on metal tray, has four PA-RISC PA8700, 750MHz processors and 32 DIMM slots - Does not include memory |
| A6445-62000 |
Hp SuperDome Cell Board Assembly (Does NOT Include Memory) |
| A6862-69001 |
Hp SuperDome cell board assembly - Cell board mounted on metal tray, has four PA-RISC PA8700, 875MHz processors and 32 DIMM slots - Does not include memory |
| A6862AX |
Hp SuperDome Cell Board Assembly (Does NOT Include Memory) |
| A5206A |
Hp SuperDome cell board assembly - Cell board mounted on metal tray, has four PA-RISC PA8600, 550MHz processors and 32 DIMM slots - Does not include memory |
| A6445A |
Hp SuperDome cell board assembly - Cell board mounted on metal tray, has four PA-RISC PA8700, 750MHz processors and 32 DIMM slots - Does not include memory |
| A6862A |
Hp SuperDome cell board assembly - Cell board mounted on metal tray, has four PA-RISC PA8700, 875MHz processors and 32 DIMM slots - Does not include memory |
| A6866A |
Hp Integrity SuperDome cell board assembly - Cell board mounted on metal tray (Does not include processors or memory) |
| A6924A |
Hp Intel Itanium 2 processor upgrade - Includes two 1.5GHz (400MHz front side bus, 6.0MB cache) processors |
|
Retainer |
| 1400-2112 |
Hp Single board computer hub (SBCH) 3V battery retainer |
|
Separator |
| A3639-04024 |
Hp PCI card separator/extractor with light pipe |
|
Strain Relief |
| A5201-00447 |
Hp Strain relief for the system backplane to ring I/O adapter cable |
|
Support |
| A5201-00168 |
Hp I/O chassis mount support |
|
Terminator |
| C2364A |
Hp Low voltage differential/single-ended SCSI terminator - Has 68-pin high density (M) connector with thumbscrews |
|
Tool |
| A5201-68002 |
Hp Jumper board lower loop back, F005 to F405 |
| 1150-5071 |
Hp Vacuum, 220/240VAC without power cord |
| A3726-30002 |
Hp Socket drive adapter - Adapts 1/4 hex drive to 1/4 socket drive |
| A5201-68004 |
Hp Anti-static mat, 24in x 36in with grounding strap |
| A5201-68013 |
Hp Cell module lifting tool |
| A5862-40007 |
Hp Cable installation tool for the I/O expansion cabinet |
|
Tray Assembly |
| A5201-04010 |
Hp I/O chassis support tray assembly - Includes tray, left and right rails, RFI strips, and power filter |
|
Voltage Regulator |
| 0950-4515 |
Hp Voltage Regulator Module (VRM) 8.5 - 2.5/3.3 volts
|
0 items