| Home > HP Parts Directory > Printers > LaserJet IIP |
 |
LaserJet IIP |
| Part # |
Accessories |
| 24540-80010 |
HP Centronics (Parallel) Cable - 36 Pin (M) to 25 Pin (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m |
| 24542G |
HP Used to Connect to HP Vectra and IBM PC/AT Compatibles - 3.0 |
| 33472-67901 |
HP Optional Lower Cassette (Letter Size) Upgrade (33472A) - Base Assembly Parts Only - Does NOT Included Paper Tray |
| 5063-1256 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m (Replacement for C2950A) |
| 5063-1257 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 3.0m (Replacement for C2951A) |
| 92275A |
HP Black toner (EP) cartridge |
| 92275B |
HP Paper Input Tray - for 8.5in x 11in Letter Size Paper |
| 92275C |
HP Paper Input Tray - for 8.5in x 14in Legal Size Paper |
| 92275D |
HP Paper Input Tray - for 210mm x 297mm A4 Size Paper |
| 92275E |
HP Paper Input Tray - for 7.25in x 10.5in Executive Size Paper |
| 92275F |
HP Envelope Input Tray - 3.4 x 7.0in to 7.4 x 10.5in - Holds 15 |
| C2913A |
HP RS-232C (Serial) Cable - 25 Pin (M) to 25 Pin (F) - to Connect to HP Vectra and IBM PC/AT/XT Compatibles - 1.2m |
| C2950A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 6 ft |
| C2991A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 ft |
| RA1-7630-000CN |
HP 'Face-Up' paper output tray - Hooks on front of printer |
| RA1-7631-000CN |
HP Legal extension tray - Attaches to multipurpose input tray |
| RF1-2427-000CN |
HP AC connector cable assembly - For fusing assembly |
| RF1-3303-000CN |
HP Fusing Heat Lamp(120V, 60Hz) - Goes in Core of Fusing Roller |
| RG1-1602-000CN |
HP Cable assembly - From AC power supply to fusing assembly |
| RG1-1608-000CN |
HP Cable Assy - to Paper Path Door - Includes Pickup Solenoid |
| RG1-1609-000CN |
HP Cable Assembly (has 8 Connectors) - to Most Major Assemblies |
| RG1-1612-000CN |
HP Cable Assy - from DC Controller to Paper Input Pickup Sensor |
| RG1-1806-070CN |
HP Multipurpose Input Tray - Fold Down Front Cover |
| RH2-5104-000CN |
HP Fiber optic cable - From DC controller to fiber optic lens |
|
Boards |
| 33471-67905 |
HP Rear dual port board assembly - Mounted on sheet metal cover |
| C2008-67901 |
HP Formatter (Main logic) board |
| RG1-1596-000CN |
HP Lower Cassette Board - on Right Side of Lower Cassette Base |
| RG1-1604-000CN |
HP Density adjust board - Includes cable assembly |
| RG1-1769-020CN |
HP Laser driver board - Includes laser assembly |
| RG9-0696-000CN |
HP High Voltage Power Supply Board - Under Lower Board Shield |
| RH6-0010-000CN |
HP Control panel assembly - Includes display and keypad |
| 33471-69001 |
HP Formatter (Main logic) board (Requires return of defective part.) |
| 33471-60001 |
HP Formatter (Main logic) board**See 33471-69001 for EXCHANGE pricing (when available). |
|
Chassis/Case |
| C2092-67901 |
HP I/O Plate Assembly - Includes Centronics connector and cable |
| RA1-7453-000CN |
HP Foot - for Bottom of Printer (1 Used) |
| RA1-7499-000CN |
HP Hinge Pin (Clear Plastic) - for Paper Path Door Assembly |
| RA1-7514-000CN |
HP Font cartridge door - Spring loaded cover - On right side |
| RA1-7515-000CN |
HP Display Window (Clear Plastic) - on Top Cover |
| RA1-7518-000CN |
HP Spring - Attaches to Font Cartridge Door on Right Side |
| RA1-7522-000CN |
HP Left side cover |
| RA1-7562-000CN |
HP Paper sensing lever - In right side of paper feed area |
| RA1-7588-000CN |
HP Paper sensing lever - In fusing assembly |
| RA1-7628-000CN |
HP Cap (for Spring) - on Bottom of Paper Path Door Assembly |
| RA1-7672-000CN |
HP Stop Cover - on Rear of (Optional) Lower Cassette Base |
| RA1-7673-000CN |
HP Replacement Top Cover for 92275C Legal Paper Tray - Covers Top Part of Tray That Extends from the Lower Cassette Base |
| RA1-7717-000CN |
HP Paper sensor lever - On left side of paper feed area |
| RA1-8244-000CN |
HP Paper deflector - Directs paper to top cover or face-up tray |
| RF1-2420-000CN |
HP Right Side Cover - for (Optional) Lower Cassette Base |
| RF1-2421-000CN |
HP Left Side Cover - for (Optional) Lower Cassette Base |
| RF1-2431-000CN |
HP Rear panel - Has bezel for I/O connector panel |
| RF1-2490-000CN |
HP Top cover - Does NOT include any attaching parts |
| RF1-3414-000CN |
HP Top cover - Does NOT include any attaching parts |
| RG1-1809-000CN |
HP Top cover assembly - Includes case pieces and control panel |
| RG1-2622-000CN |
HP Paper Path Door Asy (120V, 60Hz) - Complete Front of Printer |
| RG1-2625-000CN |
HP Top cover assembly - Includes case pieces and control panel |
| RH7-6017-000CN |
HP Power Switch (Rocker) - on Lower Right Side - Towards Rear |
| RS1-2244-000CN |
HP (Guide Plate) Pressure Spring - on Bottom of Paper Path Door |
| XH9-0059-000CN |
HP Foot - for Bottom of Printer (3 Used) |
|
Fusers |
| RG1-1788-150CN |
HP Fusing assembly (120V, 60Hz) - Bonds toner to paper by heat**See 33471-69018 for EXCHANGE pricing (when available). |
| 33481-67912 |
HP Maintenance Kit (120V) - Includes Fusing Assy, Separation Pad, Input Feed Roller, Transfer Roller, MP Pickup Roller, Internal Access Door Roller and Input Feed Roller Assembly**See 33481-69007 for EXCHANGE pricing (when available). |
| RF1-2405-000CN |
HP Thermistor Assembly (TH1) - Includes Cable - in Fusing Assy |
| RF1-2483-000CN |
HP Thermoswitch (TS1) - 175 Degree C - in Fusing Assembly |
| RF1-2484-000CN |
HP Thermoswitch (TS2) - 210 Degree C - in Fusing Assembly |
| 33481-69007 |
HP Maintenance Kit (120V) - Includes Fusing Assy, Separation Pad, Input Feed Roller, Transfer Roller, MP Pickup Roller, Internal Access Door Roller and Input Feed Roller Assembly (Requires return of defective part.) |
| 33471-69018 |
HP Fusing assembly (120V, 60Hz) - Bonds toner to paper by heat (Requires return of defective part.) |
|
Gears & Rollers |
| RA1-7583-030CN |
HP Lower Pressure Roller - Hard Rubber Roller - in Fusing Assy |
| RA1-7627-000CN |
HP Transfer charge roller (Black) - In paper path door assembly |
| RA1-7629-000CN |
HP Paper guide arm (Black) - Small curved side arms at MP input |
| RA1-7654-000CN |
HP Feed roller assembly - For (Optional) lower cassette input |
| RA1-7655-000CN |
HP Pickup roller shaft - Does NOT include any 'D-shaped' roller |
| RA1-7661-000CN |
HP Sensor arm - For sensing paper in the lower cassette base |
| RA1-7674-000CN |
HP D-Shaped Pickup Roller - in Lower Cassette Assy(3 of 4 Used) |
| RA1-7708-040CN |
HP Delivery roller - Has four 'Foam' rollers - For (Face down) top of printer paper output |
| RA1-7824-000CN |
HP D-Shaped Pickup Roller - in Lower Cassette Assy(1 of 4 Used) |
| RF1-2394-000CN |
HP Input feed roller/shaft (Only) - Has drive gear between the two feed rollers |
| RF1-2400-050CN |
HP Paper Guide Plate (Black Metal) - on Bottom of Paper Path Door - has 4in X 1/4in Felt Strip (Arms NOT Included) |
| RF1-2491-000CN |
HP Hard Roller/Spring - Rolls Against Top Output Roller(4 Used) |
| RF1-2505-000CN |
HP Fusing roller - Hollow roller - Heat lamp goes in its core |
| RG1-1776-000CN |
HP Gear Cluster Assy (Large Gears)- for Main Motor Drive |
| RG1-1777-000CN |
HP Gear Asy - on Right Side - Drives EP Drum in Toner Cartridge |
| RG1-1778-000CN |
HP Feed Roller Assy - Roller Assy After Paper Pickup Roller |
| RG1-1791-070CN |
HP Delivery roller assembly - Has four 'Foam' rollers - For (Face down) top of printer paper output |
| RG1-1792-000CN |
HP Pickup roller assembly - For multipurpose input tray |
| RG1-1833-000CN |
HP Drive Gear Asembly - Drives Face-up Delivery Roller in Front Door - Two Black 15 Tooth Gears on White Mounting Plate |
| RG9-0681-000CN |
HP Roller guide - Paper guide for transfer roller |
| RS1-0287-000CN |
HP Dual Gear (27/21 Teeth) - on Right Side of Fusing Assembly |
| RS1-0292-000CN |
HP 27 Tooth Gear - Drives Transfer Charge Roller |
|
Memory |
| 33474-60004 |
HP 1MB Memory Expansion Board (2 Boards can be Used) (33474B) |
| 33475-60010 |
HP 2MB Memory Expansion Board (2 Boards can be Used) (33475B)**See 33475-69011 for EXCHANGE pricing (when available). |
| 33439-60116 |
HP PostScript Cartridge - Replacement for 33439Q/P Option ABA |
| 33439-69001 |
HP PostScript Cartridge - Replacement for 33439Q/P Option ABA |
| 33474-69004 |
HP 1MB Memory Expansion Board (2 Boards can be Used) (33474B) |
| 33474B |
HP 1MB Memory Expansion Board (2 Boards can be Used) (33474B) |
| 33475-69011 |
HP 2MB Memory Expansion Board (2 Boards can be Used) (33475B) (Requires return of defective part.) |
| 33475B |
HP 2MB Memory Expansion Board (2 Boards can be Used) (33475B) |
|
Motors & Fans |
| RG1-1771-000CN |
HP Scanner motor assembly - Includes motor drive board |
| RH7-1094-000CN |
HP Main Motor Assembly - on Right Side of Main Body |
| RH7-1121-000CN |
HP Cooling Fan Assembly - on Upper Left Side of Printer |
|
Network Devices |
| 33417-67901 |
HP AppleTalk, with Dual I/O, Bd (PC Board ONLY) (33417A/B/C) |
| J2383-61005 |
HP External Token Ring Interface Module - Has DB-9 Connector (J2383A/B) - Note: If Replacing the J2383-60001 (J2383A), Also Order Manual Kit Part Number J2382-61010 |
| J2590A |
HP External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591A |
HP External JetDirect LAN Interface Module and Power Module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors |
| J3258-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (Part of J3258A, J3258B) |
| J3258B |
HP External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
HP External JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265A |
HP External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4101-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T/100Base-TX) Connector (J4101A/B) |
| J4101B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector |
| J4102B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J2382-69003 |
HP External LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (J2382B) - Note:If Replacing the J2382-60001 (J2382A), Also Order Manual Kit J2382-61010 |
| J2590-69001 |
HP External JetDirect LAN Interface Module with RJ-45 Connector for EtherTwist (10Base-T) or 100VG/802.12 Input and 3 Parallel (DB-25) Output Connectors (P/O J2590A) |
| J2591-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (P/O J2591A, P/O J3297A) |
| J2592-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (P/O J2592A) |
| J2593-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2593A) |
| J2594-69001 |
HP External JetDirect Token Ring Interface Module with DB-9 and RJ-45 Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2594A) |
| J4102-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (J4102A, J4102B)) |
|
Power Supplies |
| RG1-1909-020CN |
HP Power Supply Assembly (120V,60Hz) - Main Power Supply |
| 0950-2372 |
HP Power Module - for J2382/83A/B - 100-240V - Requires Separate Power Cord |
| 0950-3169 |
HP Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA - For the USA and Canada - For use with the J2592A external JetDirect LAN interface module |
| 0950-3348 |
HP Power Module - for JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B - 120V in USA/Canada |
| VD5-0185-001CN |
HP Fuse - 5A, 125V - Used in DC Power Supply Assy (125V,60Hz) |
| 33471-69017 |
HP Power Supply Assembly (120V,60Hz) - Main Power Supply |
|
Miscellaneous |
| 8120-6302 |
HP 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| RA1-7519-000CN |
HP Flip-Up Paper Stop - on Top Cover - for Paper Output(3 Used) |
| RA1-7543-020CN |
HP Memory Board Guide - Supports Optional Memory Boards(4 Used) |
| RA1-7592-000CN |
HP Release Button - on Right Side - Unlocks Paper Path Door |
| RF1-2406-000CN |
HP Lower cassette solenoids (SL2 and SL3) - Includes the pickup solenoid, the feed solenoid, and the cable harness assembly |
| RG1-1772-000CN |
HP Focusing Lens Assy - Black Plastic with Clear Curved Lens |
| RG1-1780-000CN |
HP High Voltage Contact Assy - for Toner Cartridge - with Cable |
| RG1-1781-000CN |
HP Interlock push rod - Also opens shutter on toner cartridge |
| RG1-1793-000CN |
HP Roller support - Supports left hand side of transfer roller |
| RG1-1794-000CN |
HP Roller support - Supports right side of transfer roller |
| RG1-1912-080CN |
HP Separation pad - Rectangular pad - Behind pickup roller |
| RH7-5025-000CN |
HP Pickup solenoid (SL2) - For lower cassette pickup roller |
| RH7-5026-000CN |
HP Feed solenoid (SL3) - For lower cassette paper feed |
| RY7-0017-000CN |
HP Diode upgrade kit - For fusing assembly - (10 sets) |
| WG8-0291-000CN |
HP Photo Sensor - for Paper Registration or Delivery Sensor |
| WG8-0323-000CN |
HP Photo Sensor (PS3/5) - Paper Exit and Front Door Sensors
|
0 items