| Home > HP Parts Directory > Printers > LaserJet IIID |
 |
LaserJet IIID |
| Part # |
Accessories |
| 24540-80010 |
HP Centronics (Parallel) Cable - 36 Pin (M) to 25 Pin (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m |
| 24542G |
HP Used to Connect to HP Vectra and IBM PC/AT Compatibles - 3.0 |
| 5063-1256 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m (Replacement for C2950A) |
| 5063-1257 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 3.0m (Replacement for C2951A) |
| 92295A |
HP Black toner (EP) cartridge |
| 92295M |
HP Magnetic Ink Character Recognition (MICR) toner cartridge |
| 92297B |
HP Paper Input Tray - for 8.5in x 11in Letter Size Paper |
| 92297C |
HP Paper Input Tray - for 8.5in x 14in Legal Size Paper |
| 92297D |
HP Paper Input Tray - for 210mm x 297mm A4 Size Paper |
| 92297E |
HP Paper Input Tray - for 7.25in x 10.5in Executive Size Paper |
| 92297F |
HP Envelope Input Tray - 3.4 x 7.0in to 7.4 x 10.5in - Holds 20 |
| C2913A |
HP RS-232C (Serial) Cable - 25 Pin (M) to 25 Pin (F) - to Connect to HP Vectra and IBM PC/AT/XT Compatibles - 1.2m |
| C2950A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 6 ft |
| C2991A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 ft |
| RA1-8419-000CN |
HP Tray Extender - U-Shaped Wire Form on Switchback Assy Output |
| RG1-0905-000CN |
HP Cable assembly - From AC power module to DC power supply |
| RG1-0933-060CN |
HP Transfer Corona Assy - Square Tube w/ Wire Wrapped Around it |
| RG1-0946-000CN |
HP Erase Lamp Assembly - Mounts in Top Cover (About Center) |
| RG1-0967-000CN |
HP Delivery Coupler Assy - 2 Gear Set - Driven by Fusing Assy |
| RG1-1318-000CN |
HP Upper Main Cable Harness (120V, 60Hz) - to Most Major Assy's |
| RG1-1319-000CN |
HP Lower main cable harness |
| RG1-1946-000CN |
HP Cable Assembly - to Automatic Envelope Feeder |
| RG1-1993-000CN |
HP 'Face-up' paper output tray - Mounts on switchback assembly |
| RG1-2067-000CN |
HP Cable Assembly - from DC Controller to Laser/Scanner Assy |
| RH2-5109-000CN |
HP Fiber Optic Cable - from DC Controller to Laser/Scanner Assy |
| RH7-4024-000CN |
HP Fusing Heat Lamp(120V, 60Hz) - Goes in Core of Fusing Roller |
| SG5-4022-000CN |
HP Cable Assembly - from Formatter Board to Control Panel Assy |
|
Boards |
| 33497-67901 |
HP Formatter (Main logic) board - Includes interface connectors**See 33497-69001 for EXCHANGE pricing (when available). |
| RG1-0719-000CN |
HP Exit Sensor Board - with Cable & Thermistor - in Fusing Assy |
| RG1-1970-070CN |
HP DC controller board |
| RG1-1989-000CN |
HP Control panel assembly |
| RG1-2549-000CN |
HP Paper control board - Includes solenoids for the upper paper pickup roller and the registration assembly |
| RG9-0605-000CN |
HP Sensor board - Has switches for upper tray size sensors |
| 33497-69001 |
HP Formatter (Main logic) board - Includes interface connectors (Requires return of defective part.) |
|
Chassis/Case |
| 92297R |
HP Replacement Top Cover - for 92297B/D/E Paper Trays |
| 92297S |
HP Replacement Top Cover - for 92297C Paper Tray |
| RA1-3831-000CN |
HP Left release hook - Latches top cover closed |
| RA1-3832-030CN |
HP Right release hook (with bracket) - Latches top cover closed |
| RA1-3959-000CN |
HP Left Side Cover - for Fusing Assembly |
| RA1-3960-000CN |
HP Right Side Cover - for Fusing Assembly |
| RA1-3974-000CN |
HP Lift-Up Cover - Over Separation Pawls - at Rear of Fuser Asy |
| RA1-4038-000CN |
HP Fusing Assembly Cover (Slotted Black Plastic - Somewhat 'S' Shaped) - Mounts on Underside of Top Cover (Covering the Delivery Roller) - Covers Fusing Assembly when Lid is Closed |
| RA1-4046-000CN |
HP Top Cover Interlock Lever - Pushes Switch in DC Power Supply |
| RA1-4167-000CN |
HP Left Insulator Mount (Clear) - Under Fusing Assembly |
| RA1-4168-000CN |
HP Right Insulator Mount (Clear) - Under Fusing Assembly |
| RA1-8276-000CN |
HP Upper Delivery Cover (V-Shaped Channel) - Mounts to the Bottom of the Top Cover (at the Rear Paper Output) |
| RA1-8284-000CN |
HP Memory Cover Panel - for Optional Memory Board Access |
| RA1-8285-000CN |
HP Test Panel - on Bottom Cover - Access to Voltage Test Points |
| RA1-8287-000CN |
HP Lower Delivery Cover (U-Shaped) - on Underside of Top Cover |
| RA1-8389-000CN |
HP Lower Right Side Panel(L-Shaped) - Covers Part of Rear Panel |
| RA1-8390-000CN |
HP Rear Panel Strip - Attaches to Lower Switchback Cover |
| RA1-8394-000CN |
HP Lower front panel - Has cutout for lower paper cassette tray |
| RA1-8396-000CN |
HP Lower Switchback Cover - Bottom 'Pan' of Switchback Assembly |
| RA1-8400-000CN |
HP Blanking panel - Covers envelope feeder mounting holes |
| RA1-8402-000CN |
HP Duplex knob - For directing paper to upper or lower tray |
| RA1-8412-000CN |
HP Left side door - Access door for inserting toner cartridge |
| RA1-8415-000CN |
HP Release lever - For toner cartridge |
| RA8-2456-000CN |
HP Rubber Foot - for Bottom of Printer (4 Used) |
| RF1-0923-020CN |
HP Access (Cover) door - For fusing assembly - Bright green |
| RF1-2133-080CN |
HP Ozone Filter Mount - Filter Holder Inside of Printer |
| RF1-2575-000CN |
HP Right side panel - Also includes part of top and rear panels |
| RF1-2576-000CN |
HP Upper Left Side Panel |
| RF1-2579-000CN |
HP Top (Panel) cover - Has recess for 'Face down' paper output |
| RF1-2606-000CN |
HP Upper front panel - Has holes for control panel & paper tray |
| RF1-2607-000CN |
HP Bottom cover - Inner metal 'Pan' for bottom of printer |
| RF1-2608-000CN |
HP Bottom Cover (Plastic) - Mounts on Bottom of Printer |
| RF1-2609-000CN |
HP Rear Delivery Cover - Switchback Assy Mounts on This Piece |
| RF1-2610-000CN |
HP Upper Left Side Cover - for Switchback Assembly |
| RF1-2611-000CN |
HP Upper Right Side Cover - for Switchback Assembly |
| RF1-2612-000CN |
HP Lower left side panel - Has cutout for toner cartridge door |
| RF1-2613-000CN |
HP Top (Front) Panel (L-Shaped) - has Cutout for Release Button |
| RF1-2659-000CN |
HP Tray Top Cover - for Upper Tray when Using Envelope Feeder |
| RG1-0929-000CN |
HP Mirror Shutter Assembly - Mounts on the Top Cover (Above the Toner Cartridge) |
| RG1-1435-000CN |
HP Right Hinge - for Top Cover Assembly |
| RG1-1436-000CN |
HP Left Hinge - for Top Cover Assembly |
| RS1-2106-000CN |
HP Spring - Applies Tension to Separation Pawl - in Fusing Assy |
| SA4-6201-050CN |
HP I/O Connector Bracket (Metal) - Attaches to Formatter Board |
| SA4-6202-000CN |
HP Cover plate - For empty optional I/O slot - On I/O bracket |
|
Fusers |
| RG1-0939-230CN |
HP Fusing assembly (120V, 60Hz) - Bonds toner to paper by heat - Does NOT include fusing roller cleaning pad |
| RF1-0842-000CN |
HP Thermoprotect Unit - Round Sensor in Center of Fusing Assy |
| 33449-69007 |
HP Maintenance Kit (120V) - 100k Page Replacement Parts (Upper Fan,Fusing Assy,Separation & Fusing Pads and Corona Wire) Note: Feed Roller in Kit will NOT fit in the LaserJet IIID (Requires return of defective part.) |
| 33440-69003 |
HP Fusing assembly (120V, 60Hz) - Bonds toner to paper by heat - Does NOT include fusing roller cleaning pad |
| 33449-67904 |
HP Maintenance Kit (120V) - 100k Page Replacement Parts (Upper Fan,Fusing Assy,Separation & Fusing Pads and Corona Wire) Note: Feed Roller in Kit will NOT fit in the LaserJet IIID**See 33449-69007 for EXCHANGE pricing (when available). |
|
Gears & Rollers |
| FB1-0242-000CN |
HP Lower Pressure Roller - Hard Rubber Roller - in Fusing Assy |
| RA1-3828-000CN |
HP Paper sensing arm - For 'paper out' & 'manual feed' sensors |
| RA1-3864-000CN |
HP Upper Transfer Guide (Silver Strip) - on Registration Assy |
| RA1-3942-000CN |
HP Sensing Arm - for 'Paper Exit' Sensor - in Fusing Assembly |
| RA1-3968-000UK |
HP Fusing roller - Hollow roller - Heat lamp goes in its core |
| RA1-3976-000CN |
HP Delivery (Exit) roller assembly - In fusing assembly |
| RA1-6221-000CN |
HP Roller - Mounts in Lever Arm - in Upper Duplex Drive Assy |
| RA1-6322-000CN |
HP Clutch assembly - For duplex drive |
| RA1-7124-000CN |
HP Flapper - Directs paper path - In switchback assembly |
| RF1-0921-000CN |
HP Gear and Arm Assembly - Engages Dual Gear - in Fusing Assy |
| RF1-2073-000CN |
HP Paper pickup guide - Has curved clear piece & teflon tape |
| RG1-0934-000CN |
HP Upper Feed Drive Assembly - Mounts on Right Side of Printer (Six Gears Mounted on a Plate) |
| RG1-0938-000CN |
HP Feed guide assembly - Curved plastic piece with ribs |
| RG1-0943-000CN |
HP Gear Cluster (Drive) Assembly - Attaches to Main Motor |
| RG1-0945-000CN |
HP Delivery assembly - Final drive rollers for top cover output |
| RG1-1326-000CN |
HP Registration Assy - Next Set of Rollers After Paper Pickup |
| RG1-1345-060CN |
HP Duplex Drive Roller Assy - Includes Paper Feed Sensor (PS3) |
| RG1-1348-000CN |
HP Vertial Registration Drive Control Assembly - Mounts in the Lower Left Side of the Printer |
| RG1-1356-000CN |
HP Paper alignment roller - In lower duplex guide assembly |
| RG1-1992-000CN |
HP Switchback assembly - Does NOT include exterior case pieces |
| RG1-2499-000CN |
HP Upper pickup (Feed) roller - Feeds paper from input tray |
| RG1-2500-000CN |
HP Lower pickup (Feed) roller - Feeds paper from input tray |
| RS1-0105-000CN |
HP Drive Gear (19 Diagonal Teeth) - Engages Toner Cartridge |
| RS1-0106-000CN |
HP Reduction Gear (57 Teeth) - from Main Motor to 19 Tooth Gear |
| RS1-0114-000CN |
HP Dual Gear (27/18 Teeth) - in Lower Right of Fusing Assembly |
| RS1-0116-000CN |
HP Wide Gear (20 Teeth) - on Upper Rear of Fusing Assembly |
| XF9-0201-000CN |
HP Timing Belt (180 Teeth) - for the Lower Feed Drive Assembly |
| XF9-0202-000CN |
HP Timing Belt (339 Teeth) - for the Lower Feed Drive Assembly |
| XF9-0203-000CN |
HP Timing Belt (140 Teeth) - on Right Side in Lower Main Body |
| 33458-69001 |
HP Automatic Envelope Feeder - Holds 50 Envelopes (33458A) |
| 33458A |
HP Automatic Envelope Feeder - Holds 50 Envelopes (33458A) |
|
Laser Scanners |
| RG0-0050-030CN |
HP Laser/scanner assembly |
|
Memory |
| C2089-60101 |
HP PostScript PLUS Cartridge - with 35 Adobe Fonts (C2089A) |
| 33474-60004 |
HP 1MB Memory Expansion Board (2 Boards can be Used) (33474B) |
| 33475-60010 |
HP 2MB Memory Expansion Board (2 Boards can be Used) (33475B)**See 33475-69011 for EXCHANGE pricing (when available). |
| 33439-60116 |
HP PostScript Cartridge - Replacement for 33439Q/P Option ABA |
| 33439-69001 |
HP PostScript Cartridge - Replacement for 33439Q/P Option ABA |
| 33474-69004 |
HP 1MB Memory Expansion Board (2 Boards can be Used) (33474B) |
| 33474B |
HP 1MB Memory Expansion Board (2 Boards can be Used) (33474B) |
| 33475-69011 |
HP 2MB Memory Expansion Board (2 Boards can be Used) (33475B) (Requires return of defective part.) |
| 33475B |
HP 2MB Memory Expansion Board (2 Boards can be Used) (33475B) |
| C2089-69001 |
HP PostScript PLUS Cartridge - with 35 Adobe Fonts (C2089A) |
|
Motors & Fans |
| RG1-1347-000CN |
HP Lower Drive Motor Assembly - Drives the Lower Tray Paper Pickup Roller and Mechanism |
| RH7-1048-000CN |
HP Main Motor Assembly - on Right Side of Printer |
| RH7-1056-000CN |
HP Lower cooling fan - In bottom case of printer |
| RH7-1122-000CN |
HP Upper Cooling Fan (24V) - Provides Air Flow for Ozone Filter |
|
Network Devices |
| 27303-60001 |
HP ThinLAN (10Base-2) Board - for NOVELL NetWare (C2071A) |
| 27303-60101 |
HP ThinLAN (10Base-2) Board - for 3COM 3+Open LAN Manager Networks (C2071C) |
| 27303-60401 |
HP ThinLAN (10Base-2) Board - for TCP/IP Connection to UNIX (C2 |
| 27305-60001 |
HP EtherTwist (10Base-T) Board - for NOVELL NetWare (C2071B) |
| 27305-60101 |
HP ThinLAN (10Base-T) Board - for LAN Manager Networks (C2071D) |
| 27305-60401 |
HP EtherTwist (10Base-T) Board - for TCP/IP Connection to UNIX |
| 27304-69001 |
HP Token Ring Board - for NOVELL NetWare - has DB-9 Connector ( |
| 27304-69201 |
HP Token Ring Board - for LAN Manager Networks - has DB-9 Connector (C2071F) |
| 33416-67901 |
HP AppleTalk Interface Board (PC Board ONLY) (33416A/B) |
| 33480-60007 |
HP LAN EtherNet Board - for NOVELL NetWare (33480A Opt 001) |
| 33480-60008 |
HP LAN Token Ring Board - for NOVELL NetWare (33480A Opt 002) |
| J2383-61005 |
HP External Token Ring Interface Module - Has DB-9 Connector (J2383A/B) - Note: If Replacing the J2383-60001 (J2383A), Also Order Manual Kit Part Number J2382-61010 |
| J2590A |
HP External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591A |
HP External JetDirect LAN Interface Module and Power Module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors |
| J3258-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (Part of J3258A, J3258B) |
| J3258B |
HP External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
HP External JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265A |
HP External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4101-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T/100Base-TX) Connector (J4101A/B) |
| J4101B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector |
| J4102B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| 27303-69001 |
HP ThinLAN (10Base-2) Board - for NOVELL NetWare (C2071A) |
| 27303-69101 |
HP ThinLAN (10Base-2) Board - for 3COM 3+Open LAN Manager Networks (C2071C) |
| 27303-69401 |
HP ThinLAN (10Base-2) Board - for TCP/IP Connection to UNIX (C2 |
| 27305-69001 |
HP EtherTwist (10Base-T) Board - for NOVELL NetWare (C2071B) |
| 27305-69101 |
HP ThinLAN (10Base-T) Board - for LAN Manager Networks (C2071D) |
| 27305-69401 |
HP EtherTwist (10Base-T) Board - for TCP/IP Connection to UNIX |
| J2382-69003 |
HP External LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (J2382B) - Note:If Replacing the J2382-60001 (J2382A), Also Order Manual Kit J2382-61010 |
| J2590-69001 |
HP External JetDirect LAN Interface Module with RJ-45 Connector for EtherTwist (10Base-T) or 100VG/802.12 Input and 3 Parallel (DB-25) Output Connectors (P/O J2590A) |
| J2591-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (P/O J2591A, P/O J3297A) |
| J2592-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (P/O J2592A) |
| J2593-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2593A) |
| J2594-69001 |
HP External JetDirect Token Ring Interface Module with DB-9 and RJ-45 Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2594A) |
| J4102-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (J4102A, J4102B)) |
|
Power Supplies |
| 0950-2372 |
HP Power Module - for J2382/83A/B - 100-240V - Requires Separate Power Cord |
| 0950-3169 |
HP Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA - For the USA and Canada - For use with the J2592A external JetDirect LAN interface module |
| 0950-3348 |
HP Power Module - for JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B - 120V in USA/Canada |
| RG1-0936-110CN |
HP High voltage power supply assembly |
| RG1-2007-000CN |
HP DC Power Supply Assembly (120V, 60Hz) - Main Power Supply |
| WD1-0224-000CN |
HP Fuse - 6.3A, 125V - Used in Main Power Supply (120V, 60Hz) |
| 33459-69001 |
HP AC Power Module Assembly (100V/120V, 60Hz) |
| RG9-0749-000CN |
HP AC Power Module Assembly (100V/120V, 60Hz) |
|
Miscellaneous |
| 8120-6302 |
HP 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| 92295Q |
HP Ozone Filter - Square Black Filter - in Front of Fan (2/Pkg) |
| RA1-3833-000CN |
HP Left hook guide - Supports hook shaft of left hook |
| RA1-3913-000CN |
HP Cassette Stop - Mounts on Right Side of Upper Pressure Assembly Shaft |
| RA1-3917-000CN |
HP Cassette Stop - Mounts on Left Side of Upper Pressure Assembly Shaft |
| RA1-3971-000CN |
HP Separation Pawl - 'Triangular' Finger in Fusing Assy(4 Used) |
| RA1-6143-000CN |
HP Deflector Pawl - Diverts paper output to rear or top |
| RA1-8278-030CN |
HP Release Button - on Top Cover - Unlocks Top Cover |
| RA1-8289-000CN |
HP Front memory board guide - Supports optional memory board |
| RA1-8290-000CN |
HP Font Guide - Outer Plastic Bezel - for Font Cartridge Slots |
| RA1-8292-000CN |
HP Rear memory board guide - Supports optional memory board |
| RA1-8418-000CN |
HP Font guide - Inner metal structure for font cartridge slots |
| RF1-0841-000CN |
HP 1k Ohm Resistor - Behind Transfer Corona Assembly (1 Used) |
| RF1-1145-020CN |
HP Separation Pad - Rectangular Pad Mounted on Registration Asy |
| RF1-1177-000CN |
HP Cleaning brush - For cleaning the transfer corona wire |
| RF1-2118-000CN |
HP 15M Ohm Resistor - Behind Transfer Corona Assembly (2 Used) |
| RF1-2130-000CN |
HP Ozone Filter - Square Black Filter - in Front of Upper Fan |
| RF1-2548-000CN |
HP Separation pad - Rectangular pad - In lower pickup area |
| RF1-2660-000CN |
HP Separation Pad - Retangular Pad - Used on Envelope Feeder |
| RG1-0935-000CN |
HP Upper Pressure Assy - 'T' Bar - Holds Input Tray in Printer Left and Right Cassette Stops NOT Part of This Assembly |
| RG1-0966-030CN |
HP Fusing roller cleaning pad - Felt 'Wand' in fusing assembly |
| RG1-1337-030CN |
HP Sensor Assy - for Lower Input Tray - Sensor Arm in a Bracket |
| RG1-1339-000CN |
HP Sensor Assy - for Upper Input Tray - Sensor Arm in a Bracket |
| RG1-1341-000CN |
HP Sensor Assy - Lower Tray Paper Out (PS1) or Manual Feed(PS6) |
| RG1-1344-000CN |
HP Upper duplex guide assembly |
| RG1-1349-000CN |
HP Switchback drive control assembly - Includes solenoids |
| RG1-1352-000CN |
HP Flapper Solenoid (SL7) - Directs Paper Path - in Switchback |
| RG1-1353-000CN |
HP Inverter sensor assembly - In switchback assembly |
| RG1-1355-000CN |
HP Lower Pressure Assy - 'T' Bar - Holds Input Tray in Printer |
| RG1-2498-000CN |
HP Lower duplex guide assembly - Does NOT include the paper alignment roller |
| RH7-5013-000CN |
HP Solenoid - Used for the Lower Cassette Pickup Roller (SL1), the Duplex Drive Roller Clutch Solenoid (SL2), and the Vertical Registration Solenoid (SL4) |
| RH7-5018-000CN |
HP Solenoid (SL3) - for Upper Duplex Drive Assembly
|
0 items