| Home > HP Parts Directory > Printers > LaserJet 8100 |
 |
LaserJet 8100 |
| Part # |
Accessories |
| 5063-1254 |
HP Bi-Tronics Parallel Cable (A to C) - DB-25 (M) to 36 Pin High Density IEEE-1284C (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 3.0m |
| 5063-1255 |
HP Bi-Tronics Parallel Cable (A to C) - DB-25 (M) to 36 Pin High Density IEEE-1284C (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 meters long |
| C2946A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long |
| C2947A |
HP Bi-Tronics Parallel Cable (A to C) - DB-25 (M) to 36 Pin High Density IEEE-1284C (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 meters long |
| C2975A |
HP Printer Stand - for LaserJet 5Si Family and 8000 Printers - Used in Place of Tray 4 When Mailbox Accessory Installed |
| C2985-61001 |
HP 3.2 GB Hard Drive (LaserJet) - LaserJet EIO Font/Print Job Storage - the Normal Replacement for C2985A and C2985B Drives When Used in a LaserJet |
| C2985A |
HP 2.1 GB Hard Drive - LaserJet EIO Font/Print Job Storage - Has at Least 1.0 GB Available for Storage |
| C2985B |
HP 3.2 GB Hard Drive - DesignJet or LaserJet EIO Font/Print Job Storage - Has at Least 2.0 GB Available for Storage |
| C3764-60505 |
HP Face Up Output Bin - Top Bin on Multi-Bin Mailbox |
| C3772A |
HP Staple Cartridges for Multi-Bin Mailbox With Stapler - Package of 3 with 2000 Staples/Cartridge |
| C4182X |
HP Black Microfine Toner Cartridge |
| C4780A |
HP Optional 1000 (2 X 500) Sheet Paper Trays (Trays 4 & 5) - Installs Under Printer - Does NOT Include Paper Handling PCA |
| C4781-60504 |
HP C-link Cable - From Formatter Board to the 2,000 Sheet Input Feeder C4781A |
| C4781A |
HP Optional 2000 Sheet Paper Tray (Tray 4) - Installs Under Pri |
| C4783-60101 |
HP 7-bin table top mailbox - Whole unit |
| C4784A |
HP Mailbox Stand - Allows 7-bin Tabletop Mailbox to be Used When Printer is Mounted on 2 X 500 or 2000 Sheet Input |
| C4785-60502 |
HP Single Paper Output Bin - for the Multi-Bin Mailbox Assembly |
| C4785-60513 |
HP Repackaging kit |
| C4785-60516 |
HP Attachment kit - Attachment rod, bracket and cables |
| C4785-60519 |
HP Plastic parts kit - Contains paper anticurl spring/strings, small bottom pulley, flat cable holder, edge and gasket |
| C4785-60520 |
HP Cable Kit - Includes Interlock Switch - Head Motor Cable - Flipper Sensor, Encoder and Motor Controller Cables - ESD Cable - Delivery Head Assembly Flat Cable |
| C4785-60531 |
HP C-link cable adapter extension - Used when no input device is used with 8-bin or 5-bin mailbox |
| C4785A |
HP 8 bin mail box - Holds 2600 sheets of paper - Used with 2000 sheet paper tray or printer cabinet |
| C4787-60507 |
HP Stapler Unit C-link Cable - 97cm Long - Connects Between the Multibin Mailbox and the Stapler Unit |
| C4787A |
HP 5 Bin Mail Box With Stapler - Holds 2100 Sheets of Paper Used with 5Si Family, Mopier and 8000 Printers |
| R98-1004-000CN |
HP Lower Paper Input Tray (Tray 3) - 500 Sheet - for Letter, Legal, 11 x 17 Inch, A4 (210mm x 297mm), A3 (297mm x 420mm) and B4 (257mm x 364mm) Size Paper |
| R98-1005-000CN |
HP Upper Input Paper Tray (Tray 2) - 500 Sheet - for Letter, Legal, and A4 (210mm x 297mm) Size Paper |
| R98-1006-000CN |
HP Tray 5 assembly - Complete tray with identification label |
| R98-1007-000CN |
HP Tray 4 assembly - Complete tray with identification label |
| RA2-2408-000CN |
HP Bottom bin tray |
| RA2-2487-000CN |
HP Reversing Tray - Output Tray - Face-up |
| RB1-6490-000CN |
HP Face-Down Output Tray - Mounted in Top of Printer |
| RB1-6491-000CN |
HP Face-Up Output Tray - Mounted on Upper Left Side |
| RB2-3669-000CN |
HP Paper storage tray - Stores up to twenty pounds of paper |
| RG1-3837-000CN |
HP Face-down Bin - Even Face-down Bin Assembly - Two Rollers |
| RG5-1843-000CN |
HP Paper sensor cable - J11 to J15 |
| RG5-1850-000CN |
HP Duplexer cable assembly - From duplexer to DC controller |
| RG5-1859-000CN |
HP Sensor cable - PIU PS2 sensor cable - J13 to J1205 |
| RG5-1861-000CN |
HP Sensor Cable - PIU Paper Sensor Cable - J1201 to J219 |
| RG5-1920-000CN |
HP Cassette size sensor cable - Between cassette size sensor PCA's and formatter board |
| RG5-1921-000CN |
HP Fan cable - Fan 3 power cable |
| RG5-1928-000CN |
HP Registration cable assembly - Includes 7P and 3P connectors |
| RG5-3909-000CN |
HP Power supply cable - Between power supply and controller PCA |
| RG5-3919-000CN |
HP Main cable - Largest cable in C4781A |
| RG5-4329-000CN |
HP Multipurpose Paper Input Tray (Tray 1) - Includes Pull Out Extender Tray |
| RG5-4377-000CN |
HP Laser and Control Panel Cable |
| RG5-4378-000CN |
HP Scanner Motor Cable |
| RG5-4381-000CN |
HP Cable Assembly - Fuser Cable 1 |
| RG5-4386-000CN |
HP Cable assembly - From DC controller board to main motor |
| C4787-69506 |
HP 5-bin mailbox - Used when stapler option is present |
| C4787-69513 |
HP Stapling unit - Includes top cover, bed assembly, and board |
| C4783-69502 |
HP Face-down Bin - Odd Face-down Bin Assembly - One Roller |
| C4781-69506 |
HP 2000 sheet paper tray (Tray 4) - Paper holder cassette ONLY |
|
Boards |
| C4107-67901 |
HP Formatter board - Main logic PCA**See C4107-69001 for EXCHANGE pricing (when available). |
| C4785-60514 |
HP Diagnostic LED display board - With cable |
| C4785-60515 |
HP Status LED display - With cable |
| C4785-60539 |
HP Mailbox Contoller PCA - Located at Bottom of Stacker |
| RB2-3667-000CN |
HP Holder Size PCA - |
| RG1-3814-000CN |
HP Bin full and interlock sensor board |
| RG1-3815-000CN |
HP Sensor PCA - Empty bin sensor board |
| RG1-3816-000CN |
HP Face-up bin full & sensor PCA |
| RG1-3817-000CN |
HP LED PCA - Status panel LED display board |
| RG1-3853-060CN |
HP Controller board - 7-bin tabletop mailbox controller PCA |
| RG5-1845-000CN |
HP Paper Size Sensor Board - Used to Sense Paper Size in Upper and Lower Paper Trays (2 Used) |
| RG5-1846-000CN |
HP Switch/Sensor Board - Includes Face Down Tray Sensors and, Fusing Delivery Sensor |
| RG5-1860-000CN |
HP Paper Pickup Board - Includes 8 Photosensors - Mounted to Side of Paper Pickup Assembly |
| RG5-1884-000CN |
HP Multipurpose Paper Tray Board - Mounted to Right Side of Pickup Assembly - Includes paper sensors PS1301 and PS1302 |
| RG5-2166-000CN |
HP Sensor PCA - Paper sensing PCA - works with paper sensor arm on right side of HCI - PS3 for HCI |
| RG5-2168-000CN |
HP Sensor PCA - Paper size sensor PCA |
| RG5-3908-000CN |
HP Paper deck PCA - Input tray controller PCA |
| RG5-4204-000CN |
HP LED display - Status display with holder and cable |
| RG5-4441-000CN |
HP Front LED PCA - LED status display board |
| RG5-4442-000CN |
HP Controller PCA - 2 x 500-SHEET input tray controller PCA |
| RG5-5268-000CN |
HP Control panel - Includes display |
| C4107-69001 |
HP Formatter board - Main logic PCA (Requires return of defective part.) |
| C4787-69514 |
HP Stapling Unit Control Board - Mounted Behind Back Plate |
|
Chassis/Case |
| 5021-0349 |
HP EIO Slot Cover - On Formatter Board Without JetDirect PCA |
| C3764-60555 |
HP Top Cover - for Multi-Bin Mailbox |
| C3766-60501 |
HP Stapling unit top cover |
| C3766-60505 |
HP Stapling Unit Back Plate - Covers rear of Stapling Unit |
| C3766-60506 |
HP Stapling unit hinges - Set of 2 |
| C4214-40029 |
HP Control Panel Overlay (English) |
| C4785-60503 |
HP Blind Cover - Covers Space Trays and Face-up Bin - Home Position Cover for Head Assembly |
| C4785-60504 |
HP Front cover - Front side cover |
| C4785-60505 |
HP Side cover - Back side cover |
| C4785-60510 |
HP Fixed caster - Non-adjustable height caster |
| C4785-60511 |
HP Fixed caster - Adjustable height caster |
| C4785-60512 |
HP Attachment Clip - Attaches Multibin Mailbox to Printer |
| C4787-60503 |
HP Shipping lock kit - For 8-bin and 5-bin mailboxes |
| RA2-2439-000CN |
HP Positioning Pin - Keeps Right Cover Positioned Correctly |
| RA2-2500-000CN |
HP Support plate - Supports empty bin sensor PCA |
| RA2-2512-000CN |
HP Release handle - Latch lever handle |
| RA2-2513-000CN |
HP Tension spring - Provides tension for latch handle |
| RA2-2527-000CN |
HP Stopper plate - Limits travel of right cover |
| RA2-2531-000CN |
HP Release latch handle cover |
| RA2-2541-000CN |
HP Motor cover - Reversing mechanism motor cover plate |
| RB1-6409-000CN |
HP Sensor arm spring - Holds tension on paper feeder sensor arm |
| RB1-6421-000CN |
HP Chassis Foot - right side - two used |
| RB1-6464-000CN |
HP Upper Right Cover - Right Side - Above Drop Down Tray 1 |
| RB1-6480-000CN |
HP Lower Left Cover - Mounted Below Face-up Output Tray |
| RB1-6489-000CN |
HP AC access cover - Has cut out for A/C power cord connection |
| RB1-6492-000CN |
HP Power switch cover - Has cutout for power switch |
| RB1-6493-000CN |
HP Compression spring - Center support for left output bin |
| RB1-6509-000CN |
HP Torsion spring - Helps support left output bin tray |
| RB1-6558-020CN |
HP Sensor Arm Spring - Holds Tension on PIU Paper Sensor Arm |
| RB1-6582-020CN |
HP Upper paper guide plate |
| RB1-6615-020CN |
HP Right fusing assembly lock - Locks fuser in place |
| RB1-6616-020CN |
HP Left fusing assembly lock - Locks fuser in place |
| RB1-6692-000CN |
HP Paper sensing lever - Senses paper in face down delivery ass |
| RB1-6693-020CN |
HP Paper Height Lever - Senses when Face-Down Tray is Full |
| RB1-6777-000CN |
HP Tray Rail - Right Side Tray Rail - Channel That Attaches to Metal Frame for Tray 2 and 3 Support |
| RB1-6894-000CN |
HP Paper cassette size plate - Self adhesive label NOT included |
| RB1-7677-000CN |
HP Retainer tab |
| RB1-7746-000CN |
HP Tray shipping lock clip - Secures paper tray during shipping |
| RB1-7832-020CN |
HP 2000 sheet paper tray right side cover |
| RB1-7835-000CN |
HP Leaf spring - Retaining spring |
| RB2-2509-000CN |
HP Clutch cover for 2000 sheet input tray |
| RB2-2519-000CN |
HP Back cover - Protects back of tray assembly |
| RB2-3558-000CN |
HP Diverter door assembly - Upper door on left side of printer - Two struts are mounted to door |
| RB2-3626-000CN |
HP Front access door - Duplexer jam removal access door |
| RB2-3631-000CN |
HP Clutch Cover - Paper Feed Clutch Cover |
| RB2-3636-000CN |
HP Tray lock clip - Plastic clip at rear of top output tray |
| RB2-3641-000CN |
HP Hinge plate - Bottom half of top cover hinge |
| RB2-3642-000CN |
HP Right Rear Cover - Attaches to Sheet Metal Rear Cover |
| RB2-3666-000CN |
HP Right side cabinet cover |
| RB2-3668-000CN |
HP Front Cover - Paper Storage Tray Front Cover |
| RB2-3675-000CN |
HP Back Cover - Protects Back of Tray Assembly |
| RB2-3705-000CN |
HP Latch spacer - Black plastic piece that latch engages |
| RF1-4004-000CN |
HP Front cover - Cover with release latch handle |
| RF1-4005-000CN |
HP Latch plate |
| RF1-4008-000CN |
HP Back Cover of 7-Bin Table Top Mailbox |
| RF5-1402-000CN |
HP Rear cover - Sheet metal |
| RF5-1464-000CN |
HP Switch/sensor board plate - Shields switch/sensor PCA |
| RF5-2556-000CN |
HP Positioning Pin - Metal Locating Pins - Maintains Proper Alignment of Printer and Optional Paper Feeder - Set of 3 |
| RF5-2568-000CN |
HP Front cover - Contains LED status display window |
| RF5-2644-000CN |
HP Paper tray top cover - Includes label |
| RF5-2646-000CN |
HP Left Cover - Left Side Cabinet Cover |
| RF5-2762-000CN |
HP Front Top Cover - Cover That Status LED is Located on |
| RF5-2764-000CN |
HP Left Cover - Left Side Cabinet Cover |
| RF5-2766-000CN |
HP Paper tray top cover - Includes label |
| RG1-3838-000CN |
HP Top Cover - Top Cover Assembly - Upper Guide |
| RG1-3840-000CN |
HP Right Cover - Right Side Cover Below Diverter Assembly |
| RG5-1915-040CN |
HP Right door assembly - Door below paper tray 1 - Support strap attached to right side |
| RG5-3849-000CN |
HP Middle Paper Limit Plate - |
| RG5-3850-000CN |
HP Front Paper Reference Plate - |
| RG5-3853-000CN |
HP Adjustable foot - Threaded attachment for leveling |
| RG5-4201-000CN |
HP Back paper limit plate - |
| RG5-4203-000CN |
HP Outrigger adjustable foot - Adjusts up and down |
| RG5-4205-000CN |
HP Cabinet stabilizer (outrigger) - With adjustable foot |
| RG5-4360-000CN |
HP Top cover assembly - Does NOT include face up tray or control panel display |
| RG5-4362-000CN |
HP Front Cover - Front Access Door Mounts to this Cover |
| RS5-2499-000CN |
HP Tension spring - Front spring on metal slide |
| RS5-2561-000CN |
HP Tension Spring - |
| RS6-2072-000CN |
HP Compression spring - Holds tension on front support block |
| RS6-2073-000CN |
HP Compression spring - Holds tension on rear support block |
| XZ9-0379-000CN |
HP Door Latch (Black) - for Front Access Door |
| XZ9-0442-000CN |
HP Caster Wheel - Four Used |
|
Fusers |
| C3914-67902 |
HP Maintenance kit (120V) - Replacement parts after 350K pages includes, fusing assembly, 6 feed/separation rollers, and transfer roller**See C3914-69001 for EXCHANGE pricing (when available). |
| C3914-69001 |
HP Maintenance kit (120V) - Replacement parts after 350K pages includes, fusing assembly, 6 feed/separation rollers, and transfer roller (Requires return of defective part.) |
| C4214-69018 |
HP Fusing assembly (For 100V to 120V operation) - Bonds toner to paper with heat (Requires return of defective part.) |
|
Gears & Rollers |
| C3765-60501 |
HP Replacement optional envelope feeder - Holds 100 envelopes**See C3765-69501 for EXCHANGE pricing (when available). |
| C3765B |
HP Optional envelope feeder - Automatically feeds 100 envelopes |
| C3766-60503 |
HP Stapling unit bed assembly - Includes sliders that move sheets of paper to stapling position |
| C4265-67905 |
HP Paper Input Unit Maintenance Kit - Contains second pass roller, four spring rollers and instruction sheet - For Tray 3 PIU |
| C4782A |
HP Auto duplexer assembly - Provides double sided printing capability on laserJets 8100, 8500, 8000, and 5Si |
| C4785-60540 |
HP Flipper assembly (with cable) - Moves paper from printer to face down mailbox tray or the face up bin on top |
| H3977-60001 |
HP Paper path roller kit - Contains four feed/separation rollers and 2 pickup rollers used in Paper Input Assembly - Also has MP/Tray1 pickup roller - Procedure requires service |
| RA2-2484-000CN |
HP Bin Full Sensor Arm - Attached to Face Up Bin Sensor Flag |
| RB1-6417-000CN |
HP Registration paper sensor arm - Senses paper in registration |
| RB1-6444-000CN |
HP Release Arm - Front Toner Cartridge Release Arm - Left side of Toner Cartridge Guide Slot - Hook Shaped Cartridge Holder |
| RB1-6446-000CN |
HP Release Arm - Toner Cartridge Release Arm - Right Side Toner Cartridge Guide Slot - Hook Shaped Cartridge Holder |
| RB1-6557-000CN |
HP Paper input unit sensor arm - Senses when paper passes through paper input unit |
| RB1-9526-000CN |
HP Pickup roller - Used in tray 1 paper pickup assembly |
| RB2-3851-000CN |
HP Torque limiter - Limits rotation of feed rollers - Black and gray D-shaped roller |
| RF5-1834-000CN |
HP Feed/Separation Roller - in Paper Pickup Assembly (4 Used) tab on the other end (2 Used) |
| RF5-1835-000CN |
HP Pickup Roller - in Paper Input Unit (2 Used) |
| RF5-2676-000CN |
HP Transfer Guide - Guide Transfer Roller is Mounted Into |
| RF5-2708-000CN |
HP Pickup roller - Used in paper pickup assembly - 2 used |
| RF9-1249-000CN |
HP Diverter Drive Assembly - 4 Gear Drive Assy Mounted on Right Side of Diverter Assy - 20 Tooth Gear NOT Included |
| RF9-1394-000CN |
HP Transfer roller - Transfer charge roller (Black) |
| RG1-3844-000CN |
HP Diverter assembly - Flipper |
| RG5-1874-110CN |
HP Face down delivery assembly - Feeds paper to top of printer |
| RG5-3851-000CN |
HP Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| RG5-4303-000CN |
HP Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it |
| RG5-4305-000CN |
HP Feeder Assembly - Mounted on Upper Right Side of Chassis - Transfer Roller and Registration Assembly are Mounted on this Assembly |
| RG5-4325-000CN |
HP Diverter assembly - Diverts paper to duplexer assembly or face up tray or face down delivery assembly |
| RG5-4330-000CN |
HP Paper Pickup Assembly - for Multipurpose/Tray 1 Paper Input |
| RG5-4365-000CN |
HP Main Gear Assembly - Driven by Main Motor - Mounted on Rear of Chassis |
| RG5-4416-000CN |
HP Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| RG9-1361-000CN |
HP Transfer roller assembly - Includes transfer guide, both transfer bushings and transfer roller |
| RH7-5187-000CN |
HP Registration Assembly Clutch - Attached to Right Side of Registration Assembly |
| RH7-5188-000CN |
HP Paper Feed Clutch - on Right Side of Paper Input Unit |
| C3765-69501 |
HP Replacement optional envelope feeder - Holds 100 envelopes (Requires return of defective part.) |
| C4782-69501 |
HP Replacement Duplexer Assy - for 2 Sided Printing Capability |
| C4781-69505 |
HP 2000 Sheet Paper Tray Paper Pickup Assembly - Mounted in Upper Right Side of Chassis |
| C4781-69510 |
HP Feed Assembly - Vertical Transfer Unit - Transfers Paper from Pickup Assembly of 2000 Sheet Tray up to Printer Input |
| C4214-69017 |
HP Paper Pickup Assembly - Picks Up Paper from Upper and Lower Paper Trays - Includes Pickup, Feed and Separation Rollers |
| C4780-69503 |
HP Feed Assembly - Vertical Transfer Unit - Transfers Paper from Pickup Assembly of 2x500 Tray to Printer Input |
| C4780-69504 |
HP Moves paper from trays to feeder assembly |
|
Laser Scanners |
| C4214-69003 |
HP Laser/scanner assembly |
|
Memory |
| C4135A |
HP 4MB EDO DRAM - DIMM Package |
| C4136A |
HP 8MB EDO DRAM - DIMM Package |
| C4137A |
HP 16MB EDO DRAM - DIMM Package |
| C4140A |
HP 4MB SDRAM - Synchronous DRAM - DIMM Package |
| C4286A |
HP 2MB flash DIMM memory - Font storage device |
| C4287A |
HP 4MB flash DIMM memory - Font storage device |
| C7842-67901 |
HP 8MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C7842A |
HP 8MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C7843-67901 |
HP 16MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C7843A |
HP 16MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C7845-67901 |
HP 32MB SDRAM - 100MHz synchronous DRAM - DIMM Package |
| C7845A |
HP 32MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C7846-67901 |
HP 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| Q1887A |
HP 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
|
Motors & Fans |
| C3764-60507 |
HP Elevator Stepper Motor - Mounted in Upper Back Side of Multi-Bin Mailbox |
| C4785-60518 |
HP Transport belt motor - Includes fan |
| C4785-60523 |
HP Head assembly - Moves paper up and down the mailbox to the correct mailbox bin |
| RF1-4003-000CN |
HP Reversing mechanism motor |
| RH7-1266-000CN |
HP Low Voltage Power Supply Fan - FM2 |
| RH7-1271-000CN |
HP Fan - for Formatter Board - FM3 |
| RH7-1289-000CN |
HP Fan - Mounted to Face Down Delivery Assembly - FM4 |
| RH7-1350-000CN |
HP Paper Input Motor - Drives Rollers to Pickup and Feed Paper from Lower Paper Trays |
| RH7-1396-000CN |
HP Fan - for Laser/Scanner Assembly Power Supply - FM1 |
| RH7-1397-000CN |
HP Tray 1 Fan - FM5 |
| RH7-5219-000CN |
HP Main Motor - Mounted on Rear of Chassis |
|
Network Devices |
| J3110A |
HP Ethernet 10Base-T (RJ-45) EIO network internal print server PC board |
| J3111A |
HP Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
| J3112A |
HP JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J3113A |
HP JetDirect 600N Internal Print Server (10Base-T & 100Base-TX) LAN Interface Board - Plugs in Peripheral EIO Slot |
| J4135-61001 |
HP JetDirect Connectivity Card - Has One USB Port, One Serial (DB9) Port and One LocalTalk Port - Plugs in the EIO Slot on Selected DesignJet and LaserJet Printers (P/O J4135A) |
| J4135A |
HP JetDirect connectivity card - Has one USB port, one serial (DB9) port and one LocalTalk port - Plugs in the EIO slot on selected DesignJet and LaserJet printers |
| J4167A |
HP JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J4169A |
HP JetDirect 610N Internal Print Server (10Base-T & 100Base-TX) LAN Interface Board - Plugs in Peripheral EIO Slot - Has a RJ-45 Connector - Comes with Software on CD-Rom and Manual |
| J3110-69001 |
HP JetDirect 600N EIO internal print server 10Base-T LAN interface board - Has one RJ-45 connector - (J3110A) - Comes Standard in the LaserJet 2100TN (C4172A) |
| J3111-69001 |
HP JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector |
| J3112-69001 |
HP JetDirect 600N EIO Internal Print Server (Token Ring) LAN Interface Board - Has One RJ-45 and DB-9 Connectors (J3112A) - NOTE: EIO Boards are NOT Interchangeable with MIO Boards |
| J3113-69001 |
HP JetDirect 600N EIO Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has One RJ-45 Connector (J3113A) - NOTE: EIO and MIO Boards are NOT Interchangeable |
|
Power Supplies |
| C4789A |
HP Power Supply Kit - For Connecting a Multibin Mailbox to Printer When Printer is on a Stand - Included With C4780A (2 X 500 Sheet Input Tray) and C4781A (2000 Sheet Input Tray) |
| RG5-4021-000CN |
HP Universal power supply |
| RG5-4301-000CN |
HP Low Voltage Power Supply (240V,50Hz) - Includes Power Switch, AC Receptacle and DC Power Supply |
| RH3-2205-000CN |
HP Power Supply PCA - 7-bin Tabletop Mailbox Power Supply |
| VD5-0056-301CN |
HP Low voltage power supply fuse - For 110/120V operation |
| VD7-1893-151CN |
HP Power Supply Fuse |
| C4214-69021 |
HP High voltage power supply assembly |
| C4214-69020 |
HP Low voltage power supply (120v,60Hz) - Includes power switch, AC receptacle and DC power supply |
|
Miscellaneous |
| 8120-6812 |
HP Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA, Canada, Mexico, Philippines, and Taiwan) |
| C3764-60561 |
HP Paper Input Guide - Mounted in Top of Multi-Bin Mailbox |
| C3766-60507 |
HP Stapling Unit Wire Form Guide - Mounted In Paper Exit |
| C3766-60508 |
HP Stapling unit antistatic brush - Eliminates static charge on |
| C4781-60500 |
HP AC power box - Holds AC recptacle, fuse holder and four cable connections- includes mounting clips |
| C4781-60501 |
HP Short Jumper Cable - From C4780/81A Power Box to Printer |
| C4781-60502 |
HP Long Jumper Cable - From Power Box to Input Device |
| RA2-2485-000CN |
HP Sensor flag - Optical sensor for bin full sensor |
| RA2-2505-000CN |
HP Output bin roller bushing |
| RB1-6427-000CN |
HP CG stopper - Toner cartridge guide stop - Holds toner cartridge in place |
| RB1-6441-000CN |
HP Transfer Guide Bushing - Mounted on Transfer Roller (2 Used) |
| RB1-6461-000CN |
HP Damper holder - Front damper holder |
| RB1-6462-000CN |
HP Damper holder - Rear damper holder |
| RB1-6484-000CN |
HP Support Strap - for Left Side Door - Supports Door when Open |
| RB1-6749-000CN |
HP Internal cover for Tray 1 pickup assembly |
| RB1-6771-000CN |
HP PCA guide - Formatter board support guides |
| RB1-6775-000CN |
HP Slide guide - Guide for formatter PCA |
| RB1-6776-000CN |
HP Tray Rail Guide - Spring Loaded Metal Guide That Right Side of Tray 2 and 3 Slide Into |
| RB1-6778-000CN |
HP Rod - Tray connector rod for springs |
| RB1-6783-000CN |
HP Tray stop - Right side tray stopper - Attached to right rear side of Tray 2 and 3 - Blue plastic piece |
| RB2-3503-000CN |
HP Shaft holding block - Front registration roller support |
| RB2-3504-000CN |
HP Shaft holding block - Rear registration roller support |
| RB2-3581-000CN |
HP Torque limiter - Limits rotation of feed rollers |
| RB2-3622-000CN |
HP Toner Cartridge Guide - Front Guide - Plastic Piece With Slot to Guide Toner Cartridge |
| RF1-3998-000CN |
HP Flipper solenoid |
| RF5-1484-000CN |
HP Paper size guide/stop - For upper or lower paper input tray |
| RF5-2002-000CN |
HP Paper stop - Paper length stop for Tray 2 and 3 - Blue or green plastic piece that fits in paper length slots on left |
| RF5-2678-000CN |
HP EMI Shield - Formatter Board EMI Protective Cover |
| RF5-2701-060CN |
HP Access Door Struts - Attached to Each Side of Diverter Door Assembly (2 Used) |
| RF5-2703-000CN |
HP Separation Pad - Tray 1 Separation Pad |
| RF5-2726-000CN |
HP Toner Cartridge Guide - Rear Guide - Plastic Piece With\t Slot to Guide Toner Cartridge |
| RG5-1875-000CN |
HP Face Up Solenoid Assembly - Mounted to Rear of Chassis |
| RH2-5263-000CN |
HP Power cord (Gray) - 14 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada) |
| RH7-5223-000CN |
HP Reversing mechanism solenoid |
| RS5-1399-000CN |
HP Drive bushing - Paper deck drive assembly bushing |
| WG8-0291-000CN |
HP Photo Sensor - for Paper Registration or Delivery Sensor
|
0 items