| Home > HP Parts Directory > Printers > LaserJet 6L |
 |
LaserJet 6L |
| Part # |
Accessories |
| 5063-1256 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m (Replacement for C2950A) |
| 5063-1257 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 3.0m (Replacement for C2951A) |
| C2950A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2971A |
HP PrinterPal Accessory - Adds (External) Fax Capabilities to the LaserJet Printer - Parallel Port Connects to the LaserJet and the Serial Port to the User's PC |
| C2990A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 6 ft |
| C2991A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 ft |
| C3906A |
HP Black (Microfine) Toner (EP) Cartridge - Approx. 2500 Pages at 5 Percent Coverage |
| RB1-7326-000CN |
HP Large Paper Output Extender - Attaches to EP (Toner) Door Assy - Does NOT also Include Smaller Extender |
| RB1-7331-000CN |
HP Small Paper Output Extender - Attaches to Large Paper Output Extender that Attaches to EP (Toner) Door Assy |
| RB1-7332-000CN |
HP Output tray fin - Added to output tray to reduce possibility of accordion paper jams at fuser roller - Replaced by EP (Toner) door assembly |
| RB2-1637-000CN |
HP Large Paper Input Extender - Attaches to Back Cover - Does NOT also Include Smaller Extender |
| RB2-1638-000CN |
HP Small Paper Input Extender - Attaches to Large Paper Input Extender that Attaches to the Back Cover |
| RG5-2029-000CN |
HP Cable - from Connector J202 on DC Controller Bd to Paper Registration and Paper-out Photosensors (PS203 and PS202) |
| RG5-2032-000CN |
HP Cable - from Connector J206 on DC Controller Bd to Fusing As |
| RG5-2033-000CN |
HP Cable - from Connector J401 on DC Controller Bd to Main Motor |
| RG5-2035-000CN |
HP Cable - from Connector J208 on DC Controller Board to Laser Unit (Laser Driver/Beam Detect Circuitry) |
| RG5-2037-000CN |
HP Cable - from Connector J305 on DC Controller Bd to Switch 101 - Switch is Actuated by Opening/Closing EP (Toner) Door |
| RG5-3488-000CN |
HP Input bin assembly - Paper input supply bin |
| RG5-3491-000CN |
HP Single sheet input slot - Manual feed tray |
| RG5-3499-000CN |
HP Cable - From control panel to formatter board |
| RG5-3661-000CN |
HP Cable - from Connector J207 on DC Controller Bd to Scanner M |
| RG5-3662-000CN |
HP Cable - from Connector J209 on DC Controller Bd to Door Closed/Toner Cartridge Installed Sensor (PS204) |
|
Boards |
| C3991-60001 |
HP Formatter Board - has Bi-Tronics Interface Connector on Bd |
| RG5-2028-000CN |
HP Control panel - Small board on left side of printer |
| RG9-1454-000CN |
HP Control Panel - Small Board on Left Side of Printer |
|
Chassis/Case |
| RB1-7105-000CN |
HP Fuser Release Lever - Part of Fuser Release Assembly on Left Side of Printer |
| RB1-7177-000CN |
HP Paper Feed Frame - Main Frame that Parts such as Pickup Roller Assy and Separation Pad are Installed on |
| RB1-7185-000CN |
HP Left leg - Small leg on left side of paper kick plate |
| RB1-7186-000CN |
HP Right leg - Small leg on right side of paper kick plate |
| RB1-7223-000CN |
HP Grounding Clip - Pickup Roller Shaft to Chassis Ground |
| RB1-7286-000CN |
HP Spring - Four Used With the Four #1 Delivery Rollers |
| RB1-7287-000CN |
HP Spring - Two Used With Delivery Rollers |
| RB1-7294-000CN |
HP Spring - For paper exit sensor arm |
| RB1-7305-000CN |
HP I/O faceplate - For parallel connector |
| RB1-7321-000CN |
HP Memory Expansion Cover (Door) - on Left Side of Printer |
| RB1-7333-000CN |
HP Back cover - Has cut-outs for interface and power connectors |
| RB2-1632-000CN |
HP Gear support plate - For gear kit #2 |
| RB2-1639-000CN |
HP Memory Expansion Cover (Door) - on Left Side of Printer |
| RB2-1644-000CN |
HP Face-up/Face-down Selection Switch - on Front Left Corner of Main Cover |
| RF5-1501-030CN |
HP EP (Toner) Door Assy - Fold Foward Door w/Nameplate on it |
| RF5-1517-000CN |
HP Fuser pressure plate - Guides paper over fuser roller |
| RF5-2352-000CN |
HP EP (Toner) Door Assy - Fold Forward Door |
| RF5-2372-000CN |
HP Paper Kick Plate - Puts Pressure Against Paper So Input Roller Assembly Can Pickup Paper |
| RG5-3443-000CN |
HP Main Top Cover - Front Left Corner has Hole for Face-up/ Face-down Selection Switch - Does NOT Include the Paper Input Assemblies |
| RG5-3476-000CN |
HP Face-up/face-down shaft and media deflector |
| RS5-2501-000CN |
HP Spring - Located Underneath Paper Kick Plate |
|
Fusers |
| H3972-60001 |
HP Maintenance Kit (120V) - Most common wear parts - includes, transfer roller, pickup roller, separation pad, idler roller assembly and fusing assembly - Procedure requires service ma |
| RG5-3459-040CN |
HP Heating Element Assembly (For 100V to 120V Operation) - Bonds Toner to Paper by Heat - Mounts Above Pressure Roller |
|
Gears & Rollers |
| RB1-7176-000CN |
HP Sheet guide - Mylar strip paper guide |
| RB1-7197-000CN |
HP Clutch - on Left Side of Pickup Roller Assembly Shaft |
| RB1-7247-000CN |
HP Fuser Paper Guide - Located underneath the Delivery Assembly |
| RB1-7284-000CN |
HP Delivery roller #1 - White 'Multi-ridged' roller - Four are used in delivery assembly |
| RB1-7293-000CN |
HP Paper Exit Sensor Arm - Spring NOT Included - Arm Attaches to Center of Separation Guide Assembly |
| RB1-7341-000CN |
HP Right side toner cartridge guide |
| RB2-1685-000CN |
HP Delivery Roller #2 - 2 are used in Delivery Assembly |
| RB2-1699-000CN |
HP Idler roller for feed assembly |
| RF5-1514-000CN |
HP Left side toner cartridge guide - Back half of guide |
| RF5-1515-000CN |
HP Right side toner cartridge guide - Back half of guide |
| RF5-1533-000CN |
HP Pressure roller ground guide - Protects pressure roller ground cable |
| RF5-1534-000CN |
HP Transfer roller - Located underneath toner (EP) cartridge |
| RF5-2358-000CN |
HP Transfer Roller Guide - Fits Over Top of Transfer Roller |
| RF5-2364-000CN |
HP Pressure Roller - Shaft/Roller w/Gear on Left Side of Roller Located Underneath the Heating Element |
| RF5-2367-000CN |
HP Exit Roller Assy - Shaft with 4 Black Rollers - Rollers are Aligned with & Work in Conjunction with the White 'Multi- Ridged' Rollers of the Delivery Assembly |
| RF5-2368-000CN |
HP Fuser exit roller assembly - Shaft and rollers - Attaches to separation guide assembly |
| RG5-1947-000CN |
HP Idler Roller Shaft Assy - Includes Spring and Gears on Left End of Shaft - Located on Paper Feed Frame underneath Pickup Roller Assy |
| RG5-3452-000CN |
HP Transfer Guide - Transfer Roller Attaches to This Block |
| RG5-3474-020CN |
HP Delivery Assy - Attaches to Lower Center Area of Internal Chassis - Includes 4 White 'Multi-Ridged' & 2 other Delivery Rollers and their Associated Springs |
| RG5-3475-000CN |
HP Separation Guide Assy - Attaches to Lower, Front Area of Internal Main Chassis - Includes the Face-up/Face-down Paper Selection Lever/Deflector and Fuser Exit Roller Assembly |
| RG5-3485-030CN |
HP Feed Assembly - Attaches Under Paper Feed Frame - Has Idler Roller, Sensor Flag and Paper Input Sensor |
| RG5-3486-040CN |
HP Pickup Roller Assy - Shaft/Roller Assy that Feeds Paper from Paper Input Assemblies - Also Order Separation Pad Kit |
| RG5-5522-000CN |
HP Feed Assembly - Attaches Under Paper Feed Frame - Includes Idler Roller, Sensor Flag and Paper Input Sensor |
| RS5-0796-000CN |
HP Gear - Located on Left End of Pressure Roller Shaft |
| RY7-5005-000CN |
HP Gear kit - Includes first five gears on front left side area of the internal chassis - Gear kit #1 |
| RY7-5007-000CN |
HP Fuser Release Assy - Gear/Tab Assy on Left Side of Internal Main Chassis - Includes Housing, 2 Gears, Fuser Release Tab |
| RY7-5036-000CN |
HP Gear Kit - Includes First Four Gears Driven by Main Motor |
|
Laser Scanners |
| RG5-3497-000CN |
HP Laser/Scanner Assy - Mounts on Top of Internal Main Chassis Note: Grounding Spring MUST Also be Replaced |
|
Memory |
| C3148-67901 |
HP 4MB DRAM Jeida Memory Module (C3148A) |
| C3148A |
HP 4MB DRAM Jeida Memory Module Upgrade |
| C3938-67901 |
HP 2MB DRAM Memory Module (C3938A) |
| C3938A |
HP 2MB DRAM Memory Module Upgrade |
| C3939-67901 |
HP 1MB DRAM Jeida Memory Module (C3939A) |
| C3939A |
HP 1MB DRAM Jeida Memory Module Upgrade |
|
Motors & Fans |
| RH7-1320-000CN |
HP Main Motor - Located on Back Left Corner of Internal Chassis |
|
Network Devices |
| J2383-61005 |
HP External Token Ring Interface Module - Has DB-9 Connector (J2383A/B) - Note: If Replacing the J2383-60001 (J2383A), Also Order Manual Kit Part Number J2382-61010 |
| J2590A |
HP External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591A |
HP External JetDirect LAN Interface Module and Power Module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors |
| J3258-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (Part of J3258A, J3258B) |
| J3258B |
HP External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
HP External JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265A |
HP External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4101-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T/100Base-TX) Connector (J4101A/B) |
| J4101B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector |
| J4102B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J2382-69003 |
HP External LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (J2382B) - Note:If Replacing the J2382-60001 (J2382A), Also Order Manual Kit J2382-61010 |
| J2590-69001 |
HP External JetDirect LAN Interface Module with RJ-45 Connector for EtherTwist (10Base-T) or 100VG/802.12 Input and 3 Parallel (DB-25) Output Connectors (P/O J2590A) |
| J2591-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (P/O J2591A, P/O J3297A) |
| J2592-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (P/O J2592A) |
| J2593-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2593A) |
| J2594-69001 |
HP External JetDirect Token Ring Interface Module with DB-9 and RJ-45 Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2594A) |
| J4102-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (J4102A, J4102B)) |
|
Power Supplies |
| 0950-2372 |
HP Power Module - for J2382/83A/B - 100-240V - Requires Separate Power Cord |
| 0950-3169 |
HP Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA - For the USA and Canada - For use with the J2592A external JetDirect LAN interface module |
| 0950-3348 |
HP Power Module - for JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B - 120V in USA/Canada |
| RG5-3506-000CN |
HP DC Controller/Power Supply Bd (120V) - Larger of Two Boards Located in Chassis Base (Next to Smaller Formatter Board) |
|
Miscellaneous |
| 8120-6302 |
HP 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| C4109A |
HP Serial to Parallel I/O Adapter - Self-Powered 9 to 25 Pin Adapter - RS-232/422 - Comes With Parallel Extension |
| RB1-7107-000CN |
HP Gear holder - For gear kit #1 |
| RB1-7109-000CN |
HP Guide - for Memory Expansion Cover (Door) - Attaches to Internal Main Chassis on Left Side |
| RB1-7129-000CN |
HP Case Grounding Strap |
| RB1-7184-000CN |
HP Bushing - on Right End of Pickup Roller Assembly Shaft |
| RB1-7246-000CN |
HP Pressure Roller Bushing - One Located on Each End of Pressure Roller Shaft |
| RB1-7255-000CN |
HP Left side pressure roller support |
| RB1-7256-000CN |
HP Right side pressure roller support |
| RB1-7288-020CN |
HP Roller Bushing - Exit Roller Bushing - 2 Used |
| RB1-7334-000CN |
HP Jam prevention protector - Installs in the delivery assembly allows paper jams to be cleared without damaging printer |
| RB2-1690-000CN |
HP Fuser exit roller bushing |
| RF5-3256-000CN |
HP Interlock Assy - Detects if EP (Toner) Door is Open - Mount to Internal Main Chassis Next to Laser Scanner Assembly |
| RG5-3453-000CN |
HP Interlock Assy - Detects if EP (Toner) Door is Open - Mounts to Internal Main Chassis Next to Laser Scanner Assembly |
| RG5-3478-000CN |
HP Paper Guide - Inside Spur Assembly (2 Used) |
| RG5-3479-000CN |
HP Paper Guide - Outside Spur Assembly (2 Used) |
| RH7-5139-000CN |
HP Paper Pickup Solenoid - on Left Side of Paper Feed Frame |
| RY7-5009-000CN |
HP Paper Sensor Flag/Arm - Detects Leading and Trailing Edges of Paper - Just Left of Center on Paper Feed Frame |
| RY7-5077-000CN |
HP Printer separation pad kit - Includes main pad, spring, and two smaller subpads - Also order pickup roller assembly |
| VS1-5057-002CN |
HP Fuser Connector - Electrical Connection for Fuser Roller
|
0 items