| Home > HP Parts Directory > Printers > LaserJet 5SI |
 |
LaserJet 5SI |
| Part # |
Accessories |
| C2965-63001 |
HP 420 MB Disk Drive - Mounts to the Formatter Board - for PCL and PostScript |
| 5063-1256 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m (Replacement for C2950A) |
| 5063-1257 |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 3.0m (Replacement for C2951A) |
| C2950A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2965-60004 |
HP Disk Drive Ribbon Cable - from Disk Drive to Formatter Board |
| C2965A |
HP Optional 420 MB Disk Drive - Mounted on Formatter Board - for Both PCL and PostScript |
| C2975A |
HP Printer Stand - for LaserJet 5Si Family and 8000 Printers - Used in Place of Tray 4 When Mailbox Accessory Installed |
| C2990A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 6 ft |
| C2991A |
HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 ft |
| C3087-67901 |
HP Optional 2000 Sheet Paper Tray (Tray 4) - Installs Under Printer - 5Si HM ONLY |
| C3125-00001 |
HP DCC Cable - Connects Thermal PCA to DC Controller Board |
| C3764-60505 |
HP Face Up Output Bin - Top Bin on Multi-Bin Mailbox |
| C3764-60506 |
HP Paper Output Bin - for C3764A Multi-Bin Mailbox (Set of 8) |
| C3764-60523 |
HP Metal Box - Controller Board is Mounted In - for C3764A Multi-Bin Mailbox |
| C3764-60546 |
HP Flipper Cable - from Flipper Assembly to Controller Board - for C3764A Multi-Bin Mailbox |
| C3764-60547 |
HP Elevator Stepper Motor Cable - from Elevator Motor to Controller Board - for C3764A Multi-Bin Mailbox |
| C3764-67902 |
HP Paper Guide Kit - Includes 2 Anti Curl Strings, 2 Small Pullys and 2 Springs - for C3764A Multi-Bin Mailbox |
| C3764-67903 |
HP Flat Ribbon Cable Kit - Includes Cable and 2 Cable Holders - from Delivery Head to Controller Board - for C3764A Multi-Bin Mailbox |
| C3764-67906 |
HP Attachment Kit - Includes Beam, Bracket and 2 Clips - Used to Attach C3764A Multi-Bin Mailbox to Printer |
| C3772A |
HP Staple Cartridges for Multi-Bin Mailbox With Stapler - Package of 3 with 2000 Staples/Cartridge |
| C3909A |
HP Black Microfine Toner Cartridge - Page Yield Index 15,000 |
| C3909X |
HP Black Microfine Toner Cartridge - Page Yield Index 17,100 |
| C4101A |
HP Mopy Upgrade Kit - Includes New Formatter Board, 420MB Hard Drive, Paper Handling Controller Board, Software and Documen |
| C4781-60504 |
HP C-link Cable - From Formatter Board to the 2,000 Sheet Input Feeder C4781A |
| C4781A |
HP Optional 2000 Sheet Paper Tray (Tray 4) - Installs Under Pri |
| C4785-60502 |
HP Single Paper Output Bin - for the Multi-Bin Mailbox Assembly |
| C4785-60530 |
HP Multi-Bin Mailbox Interface Cable - Long Cable from Printer to Multi-Bin Mailbox - 178cm Long |
| C4785A |
HP 8 bin mail box - Holds 2600 sheets of paper - Used with 2000 sheet paper tray or printer cabinet |
| C4787A |
HP 5 Bin Mail Box With Stapler - Holds 2100 Sheets of Paper Used with 5Si Family, Mopier and 8000 Printers |
| R77-0003-000CN |
HP Lower Paper Input Tray (Tray 3) - 500 Sheet - for Letter, Legal, 11 x 17 Inch, A4 (210mm x 297mm), A3 (297mm x 420mm) and B4 (257mm x 364mm) Size Paper |
| R77-0004-000CN |
HP Upper Paper Input Tray (Tray 2) - 500 Sheet - for Letter, Legal, and A4 (210mm x 297mm) Size Paper |
| RB1-6490-000CN |
HP Face-Down Output Tray - Mounted in Top of Printer |
| RB1-6491-000CN |
HP Face-Up Output Tray - Mounted on Upper Left Side |
| RG5-1849-000CN |
HP Cable assembly - Fuser cable 1 - J50/51 to J10/56/222 |
| RG5-1850-000CN |
HP Duplexer cable assembly - From duplexer to DC controller |
| RG5-1883-060CN |
HP Multipurpose Paper Input Tray (Tray 1) - Includes Pull Out Extender Tray |
| RG5-1919-000CN |
HP Cable assembly - From DC controller board to main motor |
| RG5-1920-000CN |
HP Cassette size sensor cable - Between cassette size sensor PCA's and formatter board |
| RG5-1921-000CN |
HP Fan cable - Fan 3 power cable |
| RG5-1923-000CN |
HP Front Panel Cable - Control Panel Display Cable - No Longer Available - Order the Two Cable Bundle |
| RG5-1924-000CN |
HP Cable Assembly - Two Cable Bundle - From DC Controller Board to Laser Scanner and to Control Panel |
| RG5-1925-000CN |
HP Cable Assembly - Scanner Motor Cable |
| RG5-1926-000CN |
HP BD cable - J18 to J2007 |
| RG5-1927-000CN |
HP ILS cable - From J1401 to J221/J205 |
| RG5-1928-000CN |
HP Registration cable assembly - Includes 7P and 3P connectors |
| RG5-2155-000CN |
HP 2000 sheet paper tray - Slide out tray - Includes cables to raise tray |
| C2965-69001 |
HP 420 MB Disk Drive - Mounts to the Formatter Board - for PCL and PostScript |
| C4781-69514 |
HP Optional 2000 Sheet Paper Tray (Tray 4) - Installs Under Pri |
| C4785-69524 |
HP 8-Bin Mailbox - Mailbox Assembly Without Attachment Rod (C47 |
|
Boards |
| C3125-60002 |
HP Thermal PCA - Fuser setting controller PCA |
| RG5-1844-050CN |
HP DC controller board**See C3166-69010 for EXCHANGE pricing (when available). |
| C3168-67906 |
HP Formatter board - Main logic PCA - Has parallel connector**See C3168-69006 for EXCHANGE pricing (when available). |
| C3768-60501 |
HP Replacement Paper Handling Controller Board -Includes Short Ribbon Cable to Connect to Formatter Board - Used with Multi-Bin Mail Box and/or 2000 Sheet Paper Tray |
| C3125-67901 |
HP Formatter board - Main logic PCA |
| C3766-60541 |
HP Controller Board - Mounted in Metal Box in Bottom of C3764A Multi-Bin Mailbox |
| C3768A |
HP Paper Handling Controller Board - Required when Adding the Optional 2000 Sheet Input Paper Tray |
| RG5-1845-000CN |
HP Paper Size Sensor Board - Used to Sense Paper Size in Upper and Lower Paper Trays (2 Used) |
| RG5-1846-000CN |
HP Switch/Sensor Board - Includes Face Down Tray Sensors and, Fusing Delivery Sensor |
| RG5-1860-000CN |
HP Paper Pickup Board - Includes 8 Photosensors - Mounted to Side of Paper Pickup Assembly |
| RG5-1884-000CN |
HP Multipurpose Paper Tray Board - Mounted to Right Side of Pickup Assembly - Includes paper sensors PS1301 and PS1302 |
| RG5-2225-000CN |
HP 2000 Sheet Tray Paper Sensor Board - on Rear of Chassis |
| RG5-2226-000CN |
HP 2000 Sheet Tray Paper Size Board - on Rear of Chassis |
| RG5-2433-000CN |
HP Control panel - Includes display |
| RG5-4198-000CN |
HP 2000 Sheet Paper Tray Controller Board - on Rear of Chassis |
| C3125-69002 |
HP Thermal PCA - Fuser setting controller PCA (Part Number has been changed to C3125-60002) |
| C3168-69006 |
HP Formatter board - Main logic PCA - Has parallel connector (Requires return of defective part.) |
| C3768-69501 |
HP Replacement Paper Handling Controller Board -Includes Short Ribbon Cable to Connect to Formatter Board - Used with Multi-Bin Mail Box and/or 2000 Sheet Paper Tray (Part Number has been changed to C3768-60501) |
| C3166-69010 |
HP DC controller board (Requires return of defective part.) |
|
Chassis/Case |
| C2009-00006 |
HP Lower MIO Cover Plate - For empty MIO slot |
| C2009-60109 |
HP Upper MIO Cover Plate - For empty MIO slot |
| C3166-40001 |
HP Control panel overlay (English) |
| C3764-60514 |
HP Jam Access Door Assembly - Assembly with 6 Rollers - Mounted In Top of the C3764A Multi-Bin Mailbox |
| C3764-60551 |
HP Swivel Caster - Bottom of C3764A Multi-Bin Mailbox |
| C3764-60553 |
HP Right Side Cover - for C3764A Multi-Bin Mailbox |
| C3764-60554 |
HP Left Side Cover - for C3764A Multi-Bin Mailbox |
| C3764-60555 |
HP Top Cover - for Multi-Bin Mailbox |
| C3764-67905 |
HP Interlock Switch Kit - Includes Interlock Switch and Cable - for C3764A Multi-Bin Mailbox |
| C4785-60503 |
HP Blind Cover - Covers Space Trays and Face-up Bin - Home Position Cover for Head Assembly |
| RB1-6468-000CN |
HP Clutch cover - Paper feed clutch cover |
| RB1-6480-000CN |
HP Lower Left Cover - Mounted Below Face-up Output Tray |
| RB1-6489-000CN |
HP AC access cover - Has cut out for A/C power cord connection |
| RB1-6492-000CN |
HP Power switch cover - Has cutout for power switch |
| RB1-6493-000CN |
HP Compression spring - Center support for left output bin |
| RB1-6494-000CN |
HP Front Cover - Front Access Door Mounts to this Cover |
| RB1-6495-020CN |
HP Front access door |
| RB1-6498-000CN |
HP Right Rear Cover - Attaches to Sheet Metal Rear Cover |
| RB1-6615-020CN |
HP Right fusing assembly lock - Locks fuser in place |
| RB1-6616-020CN |
HP Left fusing assembly lock - Locks fuser in place |
| RB1-6667-000CN |
HP Diverter door assembly - Upper door on left side of printer - Two struts are mounted to door |
| RB1-6692-000CN |
HP Paper sensing lever - Senses paper in face down delivery ass |
| RB1-6693-020CN |
HP Paper Height Lever - Senses when Face-Down Tray is Full |
| RB1-6708-000CN |
HP Retainer clip - Keeps multipurpose/tray 1 hinge in place - Black plastic clip for left side tray 1 hinge stop |
| RB1-6709-000CN |
HP Retainer clip - Keeps multipurpose/tray1 hinge in place - Black plastic clip for right side tray 1 hinge |
| RB1-6777-000CN |
HP Tray Rail - Right Side Tray Rail - Channel That Attaches to Metal Frame for Tray 2 and 3 Support |
| RB1-6894-000CN |
HP Paper cassette size plate - Self adhesive label NOT included |
| RB1-7832-020CN |
HP 2000 sheet paper tray right side cover |
| RB1-7833-020CN |
HP 2000 sheet paper tray left side cover |
| RB1-7834-000CN |
HP 2000 sheet paper tray rear cover |
| RF5-1402-000CN |
HP Rear cover - Sheet metal |
| RF5-1464-000CN |
HP Switch/sensor board plate - Shields switch/sensor PCA |
| RF5-1632-000CN |
HP 2000 Sheet Paper Tray Front Cover - Front of Slide Out Tray |
| RG5-1870-090CN |
HP Top cover assembly - Does NOT include face up tray or control panel display |
| RG5-1915-040CN |
HP Right door assembly - Door below paper tray 1 - Support strap attached to right side |
| RG5-2150-000CN |
HP Back Paper Limit Plate - Back of Tray Paper Length Stop |
| RG5-2151-000CN |
HP Middle paper limit plate - Paper width adjustment stop |
| RG5-2156-000CN |
HP Front paper reference plate - Front length adjustment stop |
| XZ9-0379-000CN |
HP Door Latch (Black) - for Front Access Door |
|
Fusers |
| C3166-69017 |
HP Fusing assembly (For 100V to 120V operation) - Bonds toner to paper with heat (Requires return of defective part.) |
| RG5-4447-030CN |
HP Fusing assembly (For 100V to 120V operation) - Bonds toner to paper with heat**See C3166-69017 for EXCHANGE pricing (when available). |
| C3971-67903 |
HP Maintenance kit (120V) - Replacement parts after 350K pages includes, fusing assembly, 6 feed/separation rollers, and transfer roller**See C3971-69002 for EXCHANGE pricing (when available). |
| C3971B |
HP Maintenance kit (120V) - Replacement parts after 350K pages includes, fusing assembly, 6 feed/separation rollers, and transfer roller (Part Number has been changed to C3971-67903) |
| C3971-69002 |
HP Maintenance kit (120V) - Replacement parts after 350K pages includes, fusing assembly, 6 feed/separation rollers, and transfer roller (Requires return of defective part.) |
|
Gears & Rollers |
| C3124-60001 |
HP Paper Pickup Assembly - Picks Up Paper from Upper and Lower Paper Trays - Includes Pickup, Feed and Separation Rollers |
| C3124-60002 |
HP Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it - Heavy media only |
| RG5-1852-490CN |
HP Paper Pickup Assembly - Picks Up Paper from Upper and Lower Paper Trays - Includes Pickup, Feed and Separation Rollers**See C3166-69020 for EXCHANGE pricing (when available). |
| C3762-60501 |
HP Duplexer assembly - For 2 sided printing capability**See C3762-69000 for EXCHANGE pricing (when available). |
| C3765-60501 |
HP Replacement optional envelope feeder - Holds 100 envelopes**See C3765-69501 for EXCHANGE pricing (when available). |
| RG5-2175-020CN |
HP Transfer assembly - Mounted on right side of 2000 sheet tray |
| C3764-60501 |
HP Flipper Assembly - No Longer Available - Replacement Multi-Bin Mailbox Assembly Must now be Ordered |
| C3764-60516 |
HP Hex Shaft - Mounted in Jam Access Door Assembly - for C3764A Multi-Bin Mailbox |
| C3765B |
HP Optional envelope feeder - Automatically feeds 100 envelopes |
| RA9-1127-000CN |
HP 20 Tooth Gear - Used on Diverter Drive Assembly |
| RB1-6417-000CN |
HP Registration paper sensor arm - Senses paper in registration |
| RB1-6444-000CN |
HP Release Arm - Front Toner Cartridge Release Arm - Left side of Toner Cartridge Guide Slot - Hook Shaped Cartridge Holder |
| RB1-6446-000CN |
HP Release Arm - Toner Cartridge Release Arm - Right Side Toner Cartridge Guide Slot - Hook Shaped Cartridge Holder |
| RB1-6557-000CN |
HP Paper input unit sensor arm - Senses when paper passes through paper input unit |
| RB1-6581-000CN |
HP Feed roller - Shaft with four rubber rollers - Under toner cartridge and green handle 3 |
| RB1-6730-000CN |
HP Multipurpose paper input tray feed roller |
| RB1-6822-000CN |
HP Duplex roller - Roller in center of duplexer |
| RF5-1394-000CN |
HP Transfer guide - Guide transfer roller is mounted into |
| RF5-1412-000CN |
HP Transfer charge roller (Black) |
| RF5-1834-000CN |
HP Feed/Separation Roller - in Paper Pickup Assembly (4 Used) tab on the other end (2 Used) |
| RF5-1835-000CN |
HP Pickup Roller - in Paper Input Unit (2 Used) |
| RF5-2694-000CN |
HP Fusing sensor arm - Senses paper in fusing assembly |
| RF9-1249-000CN |
HP Diverter Drive Assembly - 4 Gear Drive Assy Mounted on Right Side of Diverter Assy - 20 Tooth Gear NOT Included |
| RG5-1833-040CN |
HP Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it |
| RG5-1834-000CN |
HP Feeder Assembly - Mounted on Upper Right Side of Chassis - Transfer Roller and Registration Assembly are Mounted on this Assembly |
| RG5-1847-000CN |
HP Main Gear Assembly - Driven by Main Motor - Mounted on Rear of Chassis |
| RG5-1874-110CN |
HP Face down delivery assembly - Feeds paper to top of printer |
| RG5-1880-100CN |
HP Paper Pickup Assembly - for Multipurpose Paper Input Tray - Mounted to Right Side of Chassis |
| RG5-1887-000CN |
HP Transfer Roller Assembly - Includes transfer guide bushings, transfer guide and transfer roller |
| RG5-2164-030CN |
HP 2000 Sheet Paper Tray Drive Assembly - Mounted to Rear of Ch |
| RG5-2170-000CN |
HP 2000 Sheet Paper Tray Paper Pickup Assembly - Mounted in Upper Right Side of Chassis |
| RG9-1150-000CN |
HP Diverter assembly - Diverts paper to duplexer assembly or face up tray or face down delivery assembly |
| RH7-5203-000CN |
HP Registration Assembly Clutch - Attached to Right Side of Registration Assembly |
| RH7-5204-000CN |
HP Paper Feed Clutch - on Right Side of Paper Input Unit |
| C3124-69001 |
HP Paper Pickup Assembly - Picks Up Paper from Upper and Lower Paper Trays - Includes Pickup, Feed and Separation Rollers (Part Number has been changed to C3124-69001) |
| C3124-69002 |
HP Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it - Heavy media only (Part Number has been changed to C3124-60002) |
| C3762-69000 |
HP Duplexer assembly - For 2 sided printing capability (Requires return of defective part.) |
| C3765-69501 |
HP Replacement optional envelope feeder - Holds 100 envelopes (Requires return of defective part.) |
| C4178-69001 |
HP Duplexer assembly - For 2 sided printing capablity |
| C3166-69020 |
HP Paper Pickup Assembly - Picks Up Paper from Upper and Lower Paper Trays - Includes Pickup, Feed and Separation Rollers (Requires return of defective part.) |
| C4085-69004 |
HP Transfer assembly - Mounted on right side of 2000 sheet tray (Part Number has been changed to RG5-2175-020CN) |
|
Laser Scanners |
| RG5-1895-000CN |
HP Laser/scanner assembly**See C3166-69006 for EXCHANGE pricing (when available). |
| C3166-69006 |
HP Laser/scanner assembly (Requires return of defective part.) |
|
Memory |
| 1818-5621 |
HP 16MB SIMM Memory Module (C2747A or C3146A)**See C2747-69501 for EXCHANGE pricing (when available). |
| C3169-67901 |
HP PostScript (Lvl 2) SIMM Module (C3169A)**See C3169-69001 for EXCHANGE pricing (when available). |
| C3131-67901 |
HP 2MB SIMM Memory Module (C3131A) |
| C3131A |
HP 2MB SIMM Memory Module Upgrade |
| C3132-67901 |
HP 4MB Parity SIMM Memory Module - 70nS, 36 Bit (C3132A) |
| C3132A |
HP 4MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM) |
| C3133-67901 |
HP 8MB Parity SIMM Memory Module - 70nS, 36 Bit (C3133A) |
| C3133A |
HP 8MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM) |
| C3146-67901 |
HP 16MB SIMM memory module |
| C3169A |
HP PostScript (Lvl 2) SIMM Module |
| C2747-69501 |
HP 16MB SIMM Memory Module (C2747A or C3146A) (Requires return of defective part.) |
| C3169-69001 |
HP PostScript (Lvl 2) SIMM Module (C3169A) (Requires return of defective part.) |
|
Motors & Fans |
| C3764-60502 |
HP Delivery Head Assembly - Includes Ejector and Delivery Head Roller Motors - for C3764A Multi-Bin Mailbox |
| C3764-60507 |
HP Elevator Stepper Motor - Mounted in Upper Back Side of Multi-Bin Mailbox |
| C3764-67904 |
HP Stepper Motor/Encoder Kit - Includes Motor, Encoder and Encoder Cable - Mounted in Lower Left Side of C3764A Multi-Bin Mailbox |
| RH7-1260-000CN |
HP Main Motor - Mounted on Rear of Chassis |
| RH7-1262-000CN |
HP Paper Input Motor - Drives Rollers to Pickup and Feed Paper from Lower Paper Trays |
| RH7-1266-000CN |
HP Low Voltage Power Supply Fan - FM2 |
| RH7-1271-000CN |
HP Fan - for Formatter Board - FM3 |
| RH7-1289-000CN |
HP Fan - Mounted to Face Down Delivery Assembly - FM4 |
|
Network Devices |
| J2383-61005 |
HP External Token Ring Interface Module - Has DB-9 Connector (J2383A/B) - Note: If Replacing the J2383-60001 (J2383A), Also Order Manual Kit Part Number J2382-61010 |
| J2552B |
HP LAN & LocalTalk Interface - has EtherTwist (10Base-T), ThinLAN (10Base-2), & LocalTalk (DIN-8) Connectors - Replacement for Standard Interface in the Color LaserJet 5M |
| J2555B |
HP Token ring LAN interface board - DB-9 and RJ-45 connectors |
| J2556B |
HP EtherTwist (10Base-T or 100Base-TX) LAN Interface Board - has a RJ-45 Connector |
| J2590A |
HP External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591A |
HP External JetDirect LAN Interface Module and Power Module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors |
| J3258-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (Part of J3258A, J3258B) |
| J3258B |
HP External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
HP External JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265A |
HP External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4100A |
HP JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors |
| J4101-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T/100Base-TX) Connector (J4101A/B) |
| J4101B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector |
| J4102B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4105A |
HP JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors |
| J4106A |
HP JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 con |
| J2382-69003 |
HP External LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (J2382B) - Note:If Replacing the J2382-60001 (J2382A), Also Order Manual Kit J2382-61010 |
| J2550-69013 |
HP EtherTwist (10Base-T) LAN Interface Board (J2550A/B) |
| J2552-69013 |
HP LAN and LocalTalk Interface - has EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk (DIN-8) Connectors - Standard Interface in the Color LaserJet 5M (J2552A/B) |
| J2555-69013 |
HP Token Ring LAN Interface Board - DB-9 and RJ-45 Connectors ( |
| J2590-69001 |
HP External JetDirect LAN Interface Module with RJ-45 Connector for EtherTwist (10Base-T) or 100VG/802.12 Input and 3 Parallel (DB-25) Output Connectors (P/O J2590A) |
| J2591-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (P/O J2591A, P/O J3297A) |
| J2592-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (P/O J2592A) |
| J2593-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2593A) |
| J2594-69001 |
HP External JetDirect Token Ring Interface Module with DB-9 and RJ-45 Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2594A) |
| J4100-69001 |
HP Replacement JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors - (J4100A) |
| J4102-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (J4102A, J4102B)) |
| J4106-69001 |
HP Replacement JetDirect 400N Modular Input/Output (MIO) Internal Print Server - Provides 10Base-T Network Connection Using RJ45 Connector (J4106A) |
|
Power Supplies |
| C3166-69021 |
HP High voltage power supply assembly (Requires return of defective part.) |
| RG5-1888-150CN |
HP High voltage power supply assembly**See C3166-69021 for EXCHANGE pricing (when available). |
| RG5-3676-000CN |
HP Low Voltage Power Supply - Includes Power Switch, AC Receptacle and DC Power Supply |
| 0950-2372 |
HP Power Module - for J2382/83A/B - 100-240V - Requires Separate Power Cord |
| 0950-2927 |
HP Power Supply - for C3764A Multi-Bin Mailbox |
| 0950-3169 |
HP Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA - For the USA and Canada - For use with the J2592A external JetDirect LAN interface module |
| 0950-3348 |
HP Power Module - for JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B - 120V in USA/Canada |
| RG5-2281-000CN |
HP 2000 Sheet Paper Tray Power Supply - Mounted on Rear Chassis |
| VD5-0056-301CN |
HP Low voltage power supply fuse - For 110/120V operation |
| C3166-69005 |
HP High voltage power supply assembly (Part Number has been changed to C3166-69021) |
| C3166-69019 |
HP Low Voltage Power Supply - Includes Power Switch, AC Receptacle and DC Power Supply |
|
Miscellaneous |
| 8120-6302 |
HP 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| 8120-6812 |
HP Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA, Canada, Mexico, Philippines, and Taiwan) |
| C2009-60111 |
HP MIO Slot Bulkhead - to Install a J255XA JetDirect Card in the Upper MIO Slot this Cover Plate Must be Ordered |
| C3764-60561 |
HP Paper Input Guide - Mounted in Top of Multi-Bin Mailbox |
| RB1-6441-000CN |
HP Transfer Guide Bushing - Mounted on Transfer Roller (2 Used) |
| RB1-6443-000CN |
HP Toner cartridge guide - Front guide - Plastic piece with slot to guide toner cartridge |
| RB1-6484-000CN |
HP Support Strap - for Left Side Door - Supports Door when Open |
| RB1-6588-000CN |
HP Torque Limiter - Limits torque of lower feed roller |
| RB1-6771-000CN |
HP PCA guide - Formatter board support guides |
| RB1-6775-000CN |
HP Slide guide - Guide for formatter PCA |
| RB1-7813-000CN |
HP Registration Sensor Flag - Senses paper in paper feeder |
| RF5-1397-000CN |
HP Toner cartridge guide - Rear guide - Plastic piece with slot to guide toner cartridge |
| RF5-1455-000CN |
HP Multipurpose Paper Input Tray Separation Pad |
| RF5-1466-000CN |
HP EMI Shield - Formatter Board EMI Protective Cover |
| RF5-1484-000CN |
HP Paper size guide/stop - For upper or lower paper input tray |
| RF5-2701-060CN |
HP Access Door Struts - Attached to Each Side of Diverter Door Assembly (2 Used) |
| RG5-1875-000CN |
HP Face Up Solenoid Assembly - Mounted to Rear of Chassis |
| RH2-5263-000CN |
HP Power cord (Gray) - 14 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada) |
| RS5-1207-020CN |
HP Drive bushing - Paper deck drive assembly bushing |
| WG8-0291-000CN |
HP Photo Sensor - for Paper Registration or Delivery Sensor
|
0 items