HP Parts Directory

  
Home > HP Parts Directory > Printers > LaserJet 2100

LaserJet 2100

Part # Accessories
 5063-1256 HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m (Replacement for C2950A)
 5063-1257 HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 3.0m (Replacement for C2951A)
 C2950A HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
 C2951A HP IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
 C2990A HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 6 ft
 C2991A HP Bi-Tronics Parallel Cable (A to B) - DB-25 (M) to 36 Pin Centronics (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 10 ft
 C4096A HP LaserJet 2100 and 2200 Series Toner Cartridge (Ultra Precise Toner) - Prints Approximately 5,000 Pages
 C4793A HP 250 Sheet Universal paper tray assembly (Tray 3) - Holds 250 sheets of letter, legal, Executive, A4, A5, or B5 ISO size paper - Printer sits on top of this tray - Below Tray 2 of P
 R98-1003-000CN HP 250 Sheet Paper Tray - Adjusts for Letter, Legal, Exec, A4 - Used for Tray 2 and Optional Tray 3
 RB2-2875-000CN HP Face-up output tray pull out extender
 RB2-2876-000CN HP Output Tray - Face-up Output Tray - Drop Down Output Tray
 RB2-2935-000CN HP Gear Coupler - Between Plate Bushing and Largest Drive Gear
 RB2-3001-000CN HP Paper Cassette - Bare Paper Tray Frame
 RB2-3036-000CN HP Tray 1 Extender - Pullout Tray Extention - Attaches to Flip-out Tray Extender
 RB2-3037-000CN HP Tray 1 extender - Flip-out paper extender
 RG5-4126-000CN HP Multi-Purpose Input Tray - Input Tray 1
 RG5-4140-000CN HP Coupling Assebly - Engages Drive Gear Assembly
 RG5-4254-000CN HP Multi-purpose input tray sensor cable - Right side
 RG5-4255-000CN HP DC Power Cable -
 RG5-4262-000CN HP Paper Feeder Cable -
 RG5-4263-000CN HP Frame Ground Cable -
 RG5-4278-000CN HP Sensor Cable - Between Photo Sensor PS2001 and Tray 3 Paper Feeder Drive PC Board - J2110 to J2003
 RG5-4280-000CN HP Relay Cable - From Feed Drive Controller Board to Feed Drive Relay - One Connector to Two Connectors - Six Wires
 RG5-4281-000CN HP Frame ground cable - Ground connection to feed drive housing - Round crimp lug to push-on connector with green wire
 RH2-5348-000CN HP Flat Cable - Large Flat Cable on Engine Controller Board
 RH2-5350-000CN HP Flat Cable - Top Right Side of Printer - White Cable - From Interconnect Board to Formatter Board
 RY7-5052-000CN HP Transport roller kit - Contains all of the rollers used in the paper transport assembly
 RY7-5053-000CN HP Transport belt kit - Contains all of the belts used in the paper transport assembly
Top
Boards
 RG5-4125-020CN HP Engine controller board - For 100V-127V operation
 RG5-4277-000CN HP Tray 3 Controller Board - Paper Feed Drive PCA
 C4132-69001 HP Formatter (Main logic) board
 C4170-69005 HP Intermediate board - Interconnnect PC board
Top
Chassis/Case
 RB1-2190-000CN HP Pick-up roller spring hook
 RB1-6133-000CN HP Anchor Pin - Anchor Point for Hook Spring
 RB2-2812-000CN HP Grounding plate - Ground plate for fusing assembly RFI
 RB2-2816-000CN HP Rubber Foot - for Bottom of Tray 3 Assembly (4 Used)
 RB2-2828-000CN HP Toner Cartridge Bias Connection - Rear Left Side
 RB2-2829-000CN HP Toner Cartridge Bias Connection - Forward Left Side
 RB2-2832-000CN HP Compression spring - Provides electrical ground connection
 RB2-2836-000CN HP Paper Sensor Lever - Mechanical Device That Engages Photo Sensor PS504
 RB2-2837-000CN HP Torsion spring - Provides tension for paper sensor lever
 RB2-2842-000CN HP Paper Sensor Lever - Flag that mounts below registration assembly and passes through middle of metal plate - Activates PS502 the top of paper sensor
 RB2-2843-000CN HP Torsion spring - Provides a small amount of back pressure for the paper sensor flag
 RB2-2845-000CN HP Registration roller ground connection
 RB2-2847-000CN HP Leaf spring - Electrical ground connection
 RB2-2856-000CN HP Toner cartridge access door
 RB2-2857-000CN HP Rear Cover - Back of Printer Cover - Output Tray Assembly Attaches to this Cover
 RB2-2860-000CN HP Power button spring - Provides tension for power button
 RB2-2862-000CN HP Right Rear Side Cover - Swing Away I/O Cover - Has Slots on Back for I/O Cable Plug-in Access
 RB2-2866-000CN HP I/R port cover - Black 'D' shaped piece on front right side
 RB2-2894-000CN HP Paper Sensor Lever - Senses Paper in Tray 2 Pickup Assembly
 RB2-2937-000CN HP Motor plate - Metal plate that secures coupler assembly
 RB2-2939-000CN HP Release Lever - Mechanical Link Between Drive Coupling Assembly and Drive Arm Assembly
 RB2-2943-000CN HP Clutch Pin - Holds Drum Drive Clutch Springs - Between Pin Holder and Clutch Spring Plate
 RB2-2945-000CN HP Mount plate - Protective plate for extended I/O PCA
 RB2-2946-000CN HP FFC guide plate - Holds white flat cable in place
 RB2-2948-000CN HP Spring plate - Holds clutch pin and springs in place
 RB2-2975-000CN HP Pressure plate - Covers top of fusing roller
 RB2-2978-000CN HP Compression Spring - Provides Tension for Upper Delivery Rollers Mounted on Upper Delivery Guide - 4 Used
 RB2-2981-030CN HP Paper Sensor Lever - Actuates PS503 Paper Sensor
 RB2-2982-020CN HP Torsion spring - Provides tension for paper sensor lever
 RB2-2990-000CN HP Grounding plate - On end of delivery roller
 RB2-3000-000CN HP Front cover - Front cover and pull handle for paper tray
 RB2-3003-000CN HP End Plate - Back End Plate of Paper Cassette
 RB2-3012-000CN HP Leaf Spring - Provides Side Tension for Paper in Tray - Attaches to Right Side Width Adjustment Plate
 RB2-3041-000CN HP Tray hinge - For the left side of the multi-purpose front input tray (tray 1)
 RB2-3042-000CN HP Tray hinge - For the right side of the multi-purpose front input tray (tray 1)
 RB2-3045-000CN HP Chassis ground connection leaf spring
 RB2-3050-000CN HP Toner cartridge RFI ground connection
 RB2-3075-000CN HP Leaf spring - Chassis grounding spring
 RB2-3080-000CN HP Grounding plate - Electrical chassis ground connection
 RB2-3471-000CN HP Tray Housing - Tray 3 Housing - Bare Frame that Printer sits on Top of - Holds Tray 3
 RB2-3474-000CN HP Paper Sensor Lever - Mechanical Link To Photosensor PS2001
 RB2-3478-000CN HP Leaf spring - Provides tension for drive shaft bushing
 RB2-3479-000CN HP Tray 3 Cover - Covers Bottom of Front Lower Right Corner
 RB2-3480-000CN HP Tray 3 Cover - Covers Bottom of Drive Assembly - Right Side
 RB2-3481-000CN HP Solenoid Plate -
 RB2-3489-000CN HP Tray 3 Cover - Covers Bottom of Front Lower Left Corner
 RF5-2599-000CN HP Lifting Plate - Metal Plate That Supports Paper in Tray
 RF5-2606-000CN HP Adjustable width plate - Right side paper width stop plate
 RG5-4121-000CN HP Multi-Purpose Input Tray Cover Assembly - Tray One Cover - Includes Pull-out and Flip-out Tray Extensions
 RG5-4122-000CN HP Top cover asembly - Face-down output tray and toner cartridge access door
 RG5-4123-000CN HP DIMM Cover Assembly - Right Side Cover - Includes I/O Cover on Right Rear, Optical Filter Cover on Right Front, Control Buttons and LEDs on top right side
 RG5-4139-000CN HP Left cover assembly - Includes power button and spring
 RG5-4159-000CN HP Adjustable width plate - Left side paper width stop plate
 RH7-6051-000CN HP Microswitch - Cartridge Access Door Switch - SW1701
 RS6-2020-000CN HP Plate spring - Provides pressure for paper lifting plate
 RS6-2021-000CN HP Pad spring - Provides tension for separation pad on front of paper tray
 RS6-2022-000CN HP Compression spring - Provides tension for right side of transfer roller bushing
 RS6-2023-000CN HP Comprssion spring - Provides tension for the lower face-down delivery roller assembly
 RS6-2024-000CN HP Compression spring - Provides pressure for MP tray separation pad
 RS6-2025-000CN HP Tensioning spring - For the paper pick up gear assembly
 RS6-2027-000CN HP Compression Spring - Drum Drive Clutch Spring - Spring Closest to Spring Plate
 RS6-2029-000CN HP Compression Spring - Between Fusing Roller and Pressure Plate Above Fusing Roller - 2 Used
 RS6-2030-000CN HP Tension spring
 RS6-2031-000CN HP Compression Spring - Drum Drive Clutch Spring - Spring Closest to Drive Gear Assembly Mounting Plate
 RS6-2033-000CN HP Roller Spring - Provides Pressure for Guide Roller - 2 Used
 RS6-2034-000CN HP Torsion spring - Provides tension for gear holder assembly
 RS6-2035-000CN HP Plate spring - Provides tension for left side width plate
 RS6-2061-000CN HP Clip Spring - Provides Tension for Clip - Attaches to Hook
 RS6-2062-000CN HP Swing gear spring - Provides tension for swing gear assembly
 RS6-2063-000CN HP Roller Spring - Provides Pressure for Tray 3 Feed Roller
 RS6-2064-000CN HP Bushing Spring - Provides Tension for Tray 3 Right Side Feed Roller Support Bushing
 XD9-0134-000CN HP Retainer Clip - 'E-Ring' - Guide Roller Shaft Retainer Clip
 XD9-0159-000CN HP Dowel pin - Holds roller/cam pieces on roller dowel
Top
Fusers
 H3974-60001 HP Maintenance Kit (120V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pick-up rollers, Tray 1 and Tray 2 separation pads. Procedure requires use of service manual.
 RG5-4132-170CN HP Fusing roller assembly (For 100V to 120V operation) - Bonds toner to paper with heat
Top
Gears & Rollers
 RB2-2825-000CN HP Belt Shaft 3 - Tiny Idler Shafts at Back of Narrow Paper Belts - 2 Used
 RB2-2849-000CN HP Face-Down Delivery Roller - Lower Rollers - Four Used
 RB2-2885-000CN HP 18 Tooth Gear - Located Between the Two Paper Width Guides on the MP/Tray 1 Paper Input
 RB2-2891-000CN HP Pick-up Roller - Tray 2 and 3 - Black and White Pickup Roller Located near Front Middle of Tray - Slotted Shaft
 RB2-2892-000CN HP Guide Roller - White Plastic Roller - One on Each Side of Rubber Pickup Roller- 2 Used
 RB2-2893-000CN HP Drive shaft - Drives pickup roller
 RB2-2898-000CN HP Feed roller - Shaft with two rollers - Behind pickup roller
 RB2-2900-000CN HP Pickup roller - MP/TRAY 1 pickup roller
 RB2-2902-000CN HP Pick-up roller cam - Left side
 RB2-2903-000CN HP Pick-up roller cam - Right side
 RB2-2904-000CN HP Round roller - One on each side of D-roller
 RB2-2938-000CN HP Drive arm - Engages/disengages motor to drum drive assembly
 RB2-2977-000CN HP Delivery Roller - Roller for Upper Delivery Guide - 4 Used
 RB2-3004-000CN HP Release arm - Left side lifting plate release arm
 RB2-3005-000CN HP Release arm - Right side lifting plate release arm
 RB2-3009-000CN HP Lock arm - Locks rear paper length adjustment plate
 RB2-3010-000CN HP Sensor Arm - Paper Sensor Arm - Indicates on Front Cover the Quantity of Paper in Tray
 RB2-3040-000CN HP Gear - 26 tooth - Tray 1 pick-up roller drive gear
 RB2-3046-000CN HP Guide Roller - Provides Pressure Against Pickup Roller - For MP/Tray 1 - Two Used
 RB2-3048-000CN HP Guide Roller Shaft - Axle for White Guide Roller - 2 Used
 RB2-3054-000CN HP Idler Shaft - Small Front Pullies Attached to Small Belts
 RB2-3056-000CN HP Belt drive shaft 2 - Front of middle wide belt - Tiny drive belts attach on each end of this shaft
 RB2-3057-000CN HP Tension roller - Under middle paper transfer belt - Provides tension and guides bottom of middle belt
 RB2-3058-000CN HP Paper feed belt - Wide middle belt
 RB2-3059-000CN HP Paper Feed Belt - Long Narrow Rear Belts - 2 Used
 RB2-3060-000CN HP Paper feed belt - Short/tiny belts in front of and on each side of middle belt of paper transfer assembly
 RB2-3073-000CN HP Belt drive shaft 1 - Between wide middle belt and the two narrower rear belts - Transfers power from gear assembly
 RB2-3083-000CN HP Gear shaft - Axle for 14 tooth gear on drive gear holder
 RB2-3484-000CN HP Feed Roller - Feed Roller for Tray 3 - 2 Used
 RB2-3490-000CN HP Feed Roller - Tray 3 Feed Roller
 RF5-2601-000CN HP Pressure roller - Applies pressure to paper as it feeds through the fusing roller
 RF5-2603-000CN HP Delivery roller - Feeds paper out of fusing assembly
 RF5-2604-000CN HP Delivery roller - Upper face-down delivery roller
 RF5-2755-000CN HP Swing gear - Swing assembly includes upper cluster gear
 RG5-4119-000CN HP Delivery Roller Assembly - Lower Face-down Output Roller Assembly - Includes Roller and Holder - Four Used
 RG5-4127-000CN HP Tray 2 pickup assembly
 RG5-4128-000CN HP Multi-purpose tray pick-up roller assembly - Includes pick-up roller, roller cam, right and left cams, both round rollers and dowel pin
 RG5-4129-000CN HP Registration Assembly - Registration Shutter and Roller\t With Holder Frame Assembly
 RG5-4131-000CN HP Printer Drive Assembly - Gear Assembly on Right Side
 RG5-4134-000CN HP Fusing roller assembly (For 100V to 120V operation) - Includes heating element and fixing film sleeve
 RG5-4156-000CN HP Gear Assembly - Cassette Pick-up Gear Assembly
 RG5-4160-000CN HP Gear assembly - Drives paper transfer belt assembly
 RG5-4164-000CN HP Transfer roller assembly - Includes left side bushing
 RG5-4391-040CN HP Paper Feeder Drive Assembly for Tray 3
 RG5-4394-000CN HP Feed Roller Assembly - Tray 3 Feed Roller Assembly
 RS6-0440-000CN HP 10 Tooth Gear - Provides for Coordinated Movement of Width Adjustment Plates
 RS6-0441-000CN HP Drive Gear - Upper Delivery Roller Drive Gear - 15 Tooth
 RS6-0442-000CN HP 14 Tooth Gear - Drives Delivery Roller - Attaches to Lower Delivery Guide
 RS6-0443-000CN HP 15 Tooth Gear - Attaches to end of Delivery Roller
 RS6-0445-000CN HP Gear - 14 Tooth - Drives Registration Roller
 RS6-0446-000CN HP 201 Tooth Gear - Largest Gear in Assembly - Gear #5
 RS6-0447-000CN HP 58 Tooth/92 Tooth Cluster Gear - Gear #4
 RS6-0448-000CN HP 17 Tooth/68 Tooth Cluster Gear - Gear #11
 RS6-0449-000CN HP 25 Tooth/41 Tooth Cluster Gear - Gear #10
 RS6-0450-000CN HP 31 Tooth Gear - Printer Drive Gear #9
 RS6-0451-000CN HP 26 Tooth Gear - Printer Drive Gear #8
 RS6-0452-000CN HP 22 Tooth/93 Tooth Cluster Gear - Lower Gear of Drive Arm Ass
 RS6-0453-000CN HP 23 Tooth/46 Tooth Cluster Gear - Gear #2
 RS6-0454-000CN HP 48 Tooth Gear - Upper Gear of Drive Arm Assembly
 RS6-0455-000CN HP 67 Tooth Gear - Printer Drive Gear #1
 RS6-0456-000CN HP 22 Tooth/86 Tooth Cluster Gear - Gear #6
 RS6-0457-000CN HP 53 Tooth Gear - Printer Drive Gear #7
 RS6-0458-000CN HP 26 Tooth Gear - Attaches to end of Pressure Roller
 RS6-0459-000CN HP Transfer roller drive gear - 17 tooth
 RS6-0462-000CN HP 14 Tooth Gear - Back Gear in Drive Gear Holder Assembly
 RS6-0463-000CN HP 13 Tooth Gear - Front Gear in Drive Gear Holder Assembly
 RS6-0464-000CN HP Drive Gear - Engages Feed Belt Gear Assembly - 20 Tooth
 RS6-0495-000CN HP 27 Tooth Gear - Clutch Gear
 RS6-0497-000CN HP 39 Tooth/34 Tooth Cluster Gear - Bottom Gear of Swing Gear A
 RS6-0498-000CN HP 45 Tooth Gear - Largest Gear of Drive Assembly
 RS6-0499-000CN HP 39 Tooth Gear - Connects to Drive Shaft
 RS6-0500-000CN HP 17 Tooth Gear - Smallest Gear in Drive Assembly
 RS6-0501-000CN HP 15 Tooth Drive Gear - Drives Tray 3 Feed Roller
Top
Laser Scanners
 RG5-4172-000CN HP Laser/Scanner Assembly - Mounts on Top of Print Structure
Top
Memory
 C3098-60001 HP Replacement Postscript Emulation DIMM Module (P/O C3098A)
 C3098A HP Postscript Emulation DIMM - DIMM Package
 C4135A HP 4MB EDO DRAM - DIMM Package
 C4136A HP 8MB EDO DRAM - DIMM Package
 C4137A HP 16MB EDO DRAM - DIMM Package
Top Motors & Fans
 RH7-1383-000CN HP Cooling Fan -
 C4170-69006 HP Main Motor - Provides Power for Main Printer Drive Assembly
Top
Network Devices
 C6502A HP IEEE 1284 parallel printer port module - Plugs into the LIO module slot - Comes standard with the LaserJet 1300 series printers
 J6035B HP JetDirect 175X external print server - Has on 4-pin USB connector and on RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port
 J6038A HP JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector
 J6039B HP JetDirect 200m print server/Internet connector - Has one RJ-45 connector - Provides 10Base-T and 100Base-TX connection for printers with Low-end Input/Output (LIO) port
 J6042B HP JetDirect 250m print server/Internet connector - Has one RJ-45 connector - Provides 10Base-T and 100Base-TX connection for printers with Low-end Input/Output (LIO) port
 J6044A HP JetDirect 280m print server/Internet connector - Provides IEEE-802.11b Wi-Fi wireless connection for printers with Low-end Input/Output (LIO) port
 J6061A HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable
 MPIPA330 HP Bluetooth wireless print server - Allows wireless communication to a printer - Attached directly to the IEEE 1284B parallel port on the printer - Manufactured by MPI Tech and distributed by HP - For USA
 J6039-69021 HP JetDirect 200m print server/Internet connector - Has one RJ-45 connector - Provides 10Base-T and 100Base-TX connection for printers with Low-end Input/Output (LIO) port - (J6039B)
Top
Power Supplies
 VD7-0211-002CN HP Engine Controller Board Fuse - for 110/120V Operation
Top
Miscellaneous
 8120-6812 HP Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
 C4170-60101 HP RFI Shield - Formatter Board RFI Shield
 RB2-2817-000CN HP Dust Filter for Cooling Fan -
 RB2-2818-000CN HP Ribbon cable guide - Protects ribbon cable on right side
 RB2-2830-000CN HP Cartridge guide - Right side toner cartridge guide
 RB2-2831-000CN HP Cartridge guide - Left side toner cartridge guide
 RB2-2838-000CN HP Separation pad holder for MP/tray 1
 RB2-2850-000CN HP Roller Bushing - Supports Face-down Upper Delivery Roller
 RB2-2859-000CN HP Power switch button
 RB2-2877-000CN HP Paper guide - Curved teeth at bottom of face-up output tray
 RB2-2886-000CN HP Separation pad - MP/TRAY 1 separation pad
 RB2-2895-000CN HP Shaft bushing/retainer - Pickup Roller Right Side Support Bu
 RB2-2896-000CN HP Shaft bushing/retainer - Pickup Roller Left Side Support Bus
 RB2-2897-000CN HP Shaft bushing/retainer - Right side drive shaft support bush
 RB2-2899-000CN HP Gear holder - Holds two gears that engage pickup roller
 RB2-2926-000CN HP Transfer roller bushing - Supports right side of transfer ro
 RB2-2936-000CN HP Coupler bushing - Supports largest drive gear coupler
 RB2-2944-000CN HP PCA guide - Holds extended I/O PC board
 RB2-2947-000CN HP Pin holder - Holds drum drive clutch pin
 RB2-2950-000CN HP Spring spacer - Fits between the two drum clutch springs
 RB2-2973-000CN HP Pressure Roller Support Bushing - 2 Used
 RB2-2974-000CN HP Entrance guide - Paper input guide to fusing assembly
 RB2-2979-000CN HP Delivery roller guide - Supports delivery roller
 RB2-2985-000CN HP Roller bushing - Right side delivery roller support bushing
 RB2-2986-000CN HP Roller bushing - Left side delivery roller support bushing
 RB2-3007-000CN HP Separation pad - Small rectangular rubber pad on front of metal lifting plate
 RB2-3013-000CN HP Pad holder - Separation pad holder on front of tray
 RB2-3043-000CN HP Left roller bushing - Acts as the bearing and retainer for the left end of the paper pick-up roller assembly (tray 1)
 RB2-3044-000CN HP Right roller bushing - Acts as the bearing and retainer for the right end of the paper pick-up roller assembly (tray 1)
 RB2-3047-000CN HP Roller Holder - Holds White Guide Roller - 2 Used
 RB2-3074-000CN HP Idler Shaft Holder -Holds Small Rear Idler Shafts - 2 Used
 RB2-3081-000CN HP Feed roller bushing - Right side feed roller support
 RB2-3082-000CN HP Feed roller bushing - Left side feed roller support
 RB2-3475-000CN HP Support bushing - Feeder drive shaft bushing
 RB2-3485-000CN HP Roller Holder - Tray 3 Feed Roller Holder - 2 Used
 RB2-3486-000CN HP Roller bushing - Tray 3 left side feed roller bushing
 RB2-3487-000CN HP Roller Bushing - Tray 3 Right Side Feed Roller Bushing
 RB2-6348-000CN HP Separation pad - MP/TRAY 1 separation pad
 RB9-0695-020CN HP Separation pad - Moveable pad on front of paper tray
 RF5-2609-000CN HP Contact holder - Anchors fusing assembly to chassis
 RF5-2611-000CN HP Toner Cartridge Bias Control
 RG5-4141-000CN HP Upper delivery guide - Has four separate rollers and springs
 RH7-5209-000CN HP Solenoid
 RH7-5211-000CN HP Solenoid - MultiPurpose Tray/Tray 1 Solenoid - SL502
 RH7-5213-000CN HP Drive solenoid - Engages swing gear assembly
 VS1-6173-006CN HP 6P Connector
 VS1-6174-006CN HP Feed Drive Assembly Connector - Electrical Connection Between Tray 3 and Printer
 WG8-5382-000CN HP Photosensor (PS2001) - Tray 3 Paper Sensor
View Commonly Asked Questions   •   About Ambry International   •   Privacy Policy   •   Site Use   •   Terms & Conditions of Sale
 
  214.357.5710  214.357.5851  Ask Us a Question?
Copyright © 1995 - 2008, Ambry Technologies, Inc. All rights reserved. All trademarks are property of their respective owners.

Web Site & Database Services by ATI

1.877.462.6279 ( toll free )

8:00 am - 6:00 pm ( central )
Monday thru Friday

Search by Part Number


How do I find my part number?

Search by Model Number


How do I find my model number?

Search by Model Name


How do I find my model name?

Parts Directories

Compaq Parts

Dell Parts

HP Parts

IBM Parts

Ambry Stats

38,949

Part Searches Last 24 hrs

50,467 customers

From 142 countries

 
Ambry International, Ltd.
supplying computer parts around the world since 1991
[ Log In ]
 
Enter Part Number

  0 items
How do I find my part number?