| Home > HP Parts Directory > Printers > Color LaserJet 5M |
 |
Color LaserJet 5M |
| Part # |
Accessories |
| 24540-80010 |
HP Centronics (Parallel) Cable - 36 Pin (M) to 25 Pin (M) - to Connect to HP Vectra, and IBM PC/AT/XT Compatibles - 2.0m |
| C2937A |
HP Cabinet is made to support the color LaserJet and store supplies and accessories for the printer |
| C3102A |
HP Cyan Bottle of Toner |
| C3103A |
HP Yellow Bottle of Toner |
| C3104A |
HP Magenta Bottle of Toner |
| C3105A |
HP Black Bottle of Toner |
| C3113A |
HP Paper Input Tray - for 8.5in x 11in Letter Size Paper |
| C3114A |
HP Paper Input Tray - for 8.5in x 14in Legal Size Paper |
| C3115A |
HP Paper Input Tray - for 210mm x 297mm A4 Size Paper |
| C3116A |
HP Paper Input Tray - for 7.25in x 10.5in Executive Size Paper |
| C3117A |
HP Paper Input Tray - for 297mm x 420mm A3 Size Paper |
| C3118A |
HP Paper Input Tray - for 11in x 17in Tabloid (B) Size Paper |
|
Boards |
| C3960-67902 |
HP Formatter Board (Includes Bi-tronics Interface Connector) - Mounts on Right Side of Printer |
| 07BA-9525KC |
HP Rear Feed Unit Connector Board - Housed in the Large Rear Feed Unit Support Bracket (on Rear Lower Cover of Printer) |
| 07BA-9696KC |
HP Toner Detect Board - Mounts in Lower Left Side of Printer |
| 07BM-7917KC |
HP Control Board - Mounts on the Right Side of the Printer (Behind the Formatter Board Case) |
| 07BP-7000KC |
HP Control panel/display assembly - Complete |
| C3960-69002 |
HP Formatter Board (Includes Bi-tronics Interface Connector) - Mounts on Right Side of Printer |
|
Chassis/Case |
| 05AA47026KC |
HP Paper tray cover - For legal, tabloid, and A3 size trays |
| 05AA47090KC |
HP Paper Input Tray Spring - Mounted in Front of Tray (2 Used) |
| 07AA32564KC |
HP Upper Developer Pressure Spring (L-Shaped) - Attaches to Side of Internal Bracket (2 Used) |
| 07AA32573KC |
HP Lower Developer Pressure Spring (L-Shaped) - Attaches to Side of Internal Bracket (2 Used) |
| 07AA32582KC |
HP Center Developer Pressure Spring (L-Shaped) - Attaches to Side of Internal Bracket (2 Used) |
| 07AA40114KC |
HP Registration plate - Stops the paper until image on the print drum is aligned with the top of page |
| 07BA-1070KC |
HP Interlock Switch Assy - Mounts to Upper Left Side Chassis Includes Three Switches That Detect Top Cover Open |
| 07BA-1130KC |
HP Lower front cover - Includes power button & font access door |
| 07BA-1150KC |
HP Right side cover - Includes SIMM slot access door |
| 07BA-1162KC |
HP Toner Hopper Cover - Top/Rear of Printer - Includes Toner Hopper Access Door |
| 07BA12414KC |
HP Rear Feed Unit Support Bracket (Large) - on Lower Rear Cover |
| 07BA12441KC |
HP Rear Feed Unit Support Bracket (Small) - on Lower Rear Cover |
| 07BA-1370KC |
HP Left Side Cover - below Flip-up Developer Access Door |
| 07BA-1430KC |
HP Font cartridge access door - Right side of lower front cover |
| 07BA-1441KC |
HP Top Cover - Includes Paper Stop, Hinge Assembly and Cover Release Button with Spring - Order Nameplate Separately |
| 07BA-1450KC |
HP SIMM slot access door - Attaches to right side cover |
| 07BA-3160KC |
HP Developer Access Door - Flip-up Cover on Left Side |
| 07BA-4121KC |
HP Lower rear cover (serial number of printer is on this cover) - Includes double roller assembly in center of cover |
| 07BA70031KC |
HP Control panel cover - For display area |
| 07BA-7010KC |
HP Control panel cover (L-shaped) - Shows button functions (Eng |
| 07BA86010KC |
HP Interlock Switch - Mounts in Power Supply Drawer Assembly - Disables AC Power Supply When Top Cover is Opened |
|
Fusers |
| C3969-67901 |
HP Fusing assembly (for 110V to 127V, 60Hz operation) - Bonds toner to paper by heat**See C3969-69001 for EXCHANGE pricing (when available). |
| C3964-67901 |
HP Fusing Assembly Coating Kit (for 20,000 Page Maintenance) -\t Includes Both the Coating roller and cleaning roller |
| C3964A |
HP Fusing Assembly Coating Kit (for 20,000 Page Maintenance) - Includes Both the Coating Roller and Cleaning Roller |
| C3969-69001 |
HP Fusing assembly (for 110V to 127V, 60Hz operation) - Bonds toner to paper by heat (Requires return of defective part.) |
|
Gears & Rollers |
| C3119-60001 |
HP Optional Paper Feeder (C3119A) - Attaches to Rear of Printer**See C3119-69001 for EXCHANGE pricing (when available). |
| 07AA15083KC |
HP Upper paper exit rollers - Shaft with six rollers on it |
| 07AA40136KC |
HP Lower feed roller - Shaft with two rollers - Next rollers (in paper path) after paper is pulled from the paper tray |
| 07AA40142KC |
HP Registration feed roller - Shaft with two rollers - Rollers located (in paper path) just before registration plate |
| 07AA40171KC |
HP Paper detection arm - For registration plate |
| 07AA40183KC |
HP Paper detection arm - For paper tray |
| 07AA77260KC |
HP 44 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis |
| 07AA77271KC |
HP 20 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis |
| 07AA77280KC |
HP 24 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis |
| 07AA77290KC |
HP 30 Tooth Gear - on Upper Right Side of Chassis |
| 07AA77302KC |
HP 52 Tooth Gear - Drives Cam/Gear Assembly on Both Side of Chassis (2 Used) |
| 07AA77310KC |
HP 24 Tooth Gear - on Upper Left Side Chassis - Attaches to Cam Clutch and Shaft Assembly |
| 07AA77331KC |
HP 25 Tooth Gear/Belt Pulley - on Lower Right Side of Printer |
| 07AA77350KC |
HP 18 Tooth Gear - Mounts on the Ends of the Lower Feed Roller and the Registrationon Feed Roller Shafts (on Lower Right Side of Printer) (2 Used) |
| 07AA77360KC |
HP 36 Tooth/24 Tooth Dual Gear - on Lower Right Side of Printer |
| 07AA77611KC |
HP Drive Belt - Drives Gears on Lower Right Side of Printer |
| 07AA77620KC |
HP Gear Drive Belt - Winds around Cluster of Gears and Pulleys Located on Upper Right Side of Chassis |
| 07BA-1100KC |
HP Cam Clutch and Shaft Assembly - Controls Developer Drive Motor - Clutch Located on Upper Right Side of Chassis Next to Solenoid (SL4) |
| 07BA-1660KC |
HP Cam/Gear Assembly - on Upper Right Side of Chassis |
| 07BA-1670KC |
HP Cam/Gear Assembly - on Upper Left Side of Chassis |
| 07BA-1701KC |
HP Exit Roller (6 Used) - White Rollers Visible on Top Cover |
| 07BA-4062KC |
HP Pickup rollers - Shaft with six 'D' shaped rollers - Feeds paper from paper input tray |
| 07BA-4072KC |
HP Paper Feed Gear (a Spring Attaches to the Middle of the Gear) - on Lower Right Side of Printer |
| 07BA-5005KC |
HP Complete Paper Exit Assembly - in Front Center of Printer (Above Paper Tray) - Includes Gears, Belt, Rollers, Sensor etc. - ONLY Part Separately Available is Photosensor (PS1) |
| 07BA77320KC |
HP 74 Tooth Gear/Belt Pulley - on Lower Right Side of Printer |
| 07BA77850KC |
HP 25 Tooth Gear - on Upper Right Side of Chassis |
| 07BA77860KC |
HP 36 Tooth Gear - on Upper Right Side of Chassis |
| 07BA77990KC |
HP 23 Teeth Gear - on Upper Right Side of Chassis |
| 07BA78010KC |
HP 19 Tooth Gear - on Upper Right Side of Chassis |
| 392040140KC |
HP 36 Tooth Gear (Paper Feed Gear Inserts into Center of This Gear) - on Lower Right Side of Printer |
| C3967A |
HP Photoconductive Drum Cartridge - All Four Colors are Applied Directly to Drum, Then Transfered to the Paper - Installs in Upper Center of Printer (30,000 Pages Typical Life) |
| C3968-67901 |
HP Charge Transfer Assembly (C3968A) - Wide, Burnt Orange Belt Assembly Located Between the Paper Feed and Fusing Assemblies (60,000 Pages Typical Life) |
| C3968A |
HP Transfer Belt Assy - Wide, Burnt Orange Colored Belt Assy Located in Lower Half of Printer Between Paper Feed and Fusing Assemblies |
| C3119-69001 |
HP Optional Paper Feeder (C3119A) - Attaches to Rear of Printer (Requires return of defective part.) |
|
Laser Scanners |
| 07BA-6503KC |
HP Laser/Scanner Assembly - Located Under Top Cover of Printer |
|
Memory |
| 1818-5621 |
HP 16MB SIMM Memory Module (C2747A or C3146A)**See C2747-69501 for EXCHANGE pricing (when available). |
| C2066A |
HP 8MB SIMM Memory Module Upgrade - 80nS, 36 Bit (One SIMM) |
| C3131-67901 |
HP 2MB SIMM Memory Module (C3131A) |
| C3131A |
HP 2MB SIMM Memory Module Upgrade |
| C3132-67901 |
HP 4MB Parity SIMM Memory Module - 70nS, 36 Bit (C3132A) |
| C3132A |
HP 4MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM) |
| C3133-67901 |
HP 8MB Parity SIMM Memory Module - 70nS, 36 Bit (C3133A) |
| C3133A |
HP 8MB Parity SIMM Memory Module Upgrade - 70nS, 36 Bit (Product Includes One SIMM) |
| C3146-67901 |
HP 16MB SIMM memory module |
| C3146A |
HP 16MB, 70nS, 36-bit SIMM memory module upgrade - Includes one |
| C3963-67901 |
HP Adobe PostScript Level 2 SIMM Module - Comes Standard in the Color LaserJet 5M |
| D2150-69001 |
HP 1MB SIMM Memory Module - 80nS, 36 Bit (C2063A) |
| C2747-69501 |
HP 16MB SIMM Memory Module (C2747A or C3146A) (Requires return of defective part.) |
| D2152-69001 |
HP 8MB SIMM Memory Module - 80nS, 36 Bit (C2066A) |
| D2156-69001 |
HP 4MB SIMM Memory Module - 80nS, 36 Bit (C2065A) |
|
Motors & Fans |
| 07BA-1340KC |
HP Fuser Cooling Fan (FM9) - Center of Printer, under Top Cover |
| 07BA-1610KC |
HP Developer Control Motor (M3) - on Upper Right Side of Chassis Located below Developer Drive Motor (M2) |
| 07BM-1081KC |
HP Main Body Fan (FM4) - Front Right Corner of Lower Chassis |
| 07BM-1504KC |
HP Main Motor (M1) Assembly - on Lower Right Side Chassis - Includes Gear Cluster on Attached Bracket |
| 07BM-1552KC |
HP Developer Drive Assy (for 110V to 127V, 60Hz) - on Upper Right Side Chassis Includes Developer Drive Motor (M2), Developer Control Motor (M3), & Toner Supply Solenoid (SL3) |
|
Network Devices |
| J2341-60128 |
HP AppleTalk (LocalTalk) Interface - has DIN-8 Connector (J2341 |
| J2371-69001 |
HP EtherTwist (10Base-T) Interface Board (J2371A) |
| J2372-69001 |
HP LAN Interface Board with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (J2372A) |
| J2373-60001 |
HP Token Ring Interface Board - has DB-9 Connector (J2373A) |
| J2383-61005 |
HP External Token Ring Interface Module - Has DB-9 Connector (J2383A/B) - Note: If Replacing the J2383-60001 (J2383A), Also Order Manual Kit Part Number J2382-61010 |
| J2550B |
HP EtherTwist (10Base-T) LAN Interface Board |
| J2552B |
HP LAN & LocalTalk Interface - has EtherTwist (10Base-T), ThinLAN (10Base-2), & LocalTalk (DIN-8) Connectors - Replacement for Standard Interface in the Color LaserJet 5M |
| J2555B |
HP Token ring LAN interface board - DB-9 and RJ-45 connectors |
| J2590A |
HP External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591A |
HP External JetDirect LAN Interface Module and Power Module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors |
| J3258-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (Part of J3258A, J3258B) |
| J3258B |
HP External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
HP External JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265A |
HP External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4101-61011 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T/100Base-TX) Connector (J4101A/B) |
| J4101B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector |
| J4102B |
HP External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J2382-69003 |
HP External LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (J2382B) - Note:If Replacing the J2382-60001 (J2382A), Also Order Manual Kit J2382-61010 |
| J2550-69013 |
HP EtherTwist (10Base-T) LAN Interface Board (J2550A/B) |
| J2552-69013 |
HP LAN and LocalTalk Interface - has EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk (DIN-8) Connectors - Standard Interface in the Color LaserJet 5M (J2552A/B) |
| J2555-69013 |
HP Token Ring LAN Interface Board - DB-9 and RJ-45 Connectors ( |
| J2590-69001 |
HP External JetDirect LAN Interface Module with RJ-45 Connector for EtherTwist (10Base-T) or 100VG/802.12 Input and 3 Parallel (DB-25) Output Connectors (P/O J2590A) |
| J2591-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Connectors (P/O J2591A, P/O J3297A) |
| J2592-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (P/O J2592A) |
| J2593-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) and ThinLAN (10Base-2) Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2593A) |
| J2594-69001 |
HP External JetDirect Token Ring Interface Module with DB-9 and RJ-45 Input Connectors and 3 Parallel (DB-25) Output Connectors (P/O J2594A) |
| J4102-69001 |
HP External JetDirect LAN Interface Module with EtherTwist (10Base-T) Connector (J4102A, J4102B)) |
|
Power Supplies |
| 07BM-1012KC |
HP Power Supply Drawer Assy - for 110V to 127V, 60Hz Operation |
| 07BM-7310KC |
HP High Voltage Power Supply - Supplies the Corona Voltages - Mounts in Lower Right Side of Printer |
| 07BM-7320KC |
HP Developer High Voltage Supply - Located on Upper Right Side |
| 0950-2372 |
HP Power Module - for J2382/83A/B - 100-240V - Requires Separate Power Cord |
| 0950-3169 |
HP Power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA - For the USA and Canada - For use with the J2592A external JetDirect LAN interface module |
| 0950-3348 |
HP Power Module - for JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B - 120V in USA/Canada |
|
Miscellaneous |
| 07AA40153KC |
HP Paper detect flag (L-SHAPED) - Mounts on right end of paper detection arm shaft (for registration plate) |
| 07AA40163KC |
HP Paper detect flag (L-SHAPED) - Mounts on right end of the paper detection arm shaft (for the paper tray) |
| 07AA45567KC |
HP Paper Charging Brush - Mounts on the Front of the Charge Transfer Assembly |
| 07AA82532KC |
HP Toner Hopper Lock Solenoid (SL6) - on Upper Left Side of Printer - Unlocks the Selected Toner Hopper |
| 07AA88223KC |
HP 'Toner Out' Sensor(4 Used) - Mounts on Back of Toner Hoppers |
| 07BA12135KC |
HP Release Button - for the Top Cover Assembly |
| 07BA12582KC |
HP Flip-Up Paper Stop - on Top Cover - for Paper Output |
| 07BA-1640KC |
HP Cam Solenoid (SL4) - on Upper Right Side Chassis - Engages Clutch That Causes Developer Drive Motor to Rotate |
| 07BA-3520KC |
HP Toner Supply Solenoid Assembly (SL6) - Mounts on the Side of the Toner Hopper Assembly |
| 07BA-4180KC |
HP Paper Feed Solenoid (SL1) - Lower Right Side of Printer Actuates Clutch to Allow Paper Pickup From Paper Tray |
| 07BA-4310KC |
HP Registration Solenoid (SL2) - Lower Left Side of Printer Activation Causes Registration Plate to Drop |
| 07BA-9601KC |
HP Paper size sensor - Detects size of paper tray being used |
| 07BM10971KC |
HP Ozone Filter - Slides in Filter Holder in Front of the Main Body Fan (Behind the Control Panel Assembly) |
| 07BM-3911KC |
HP Complete toner hopper assembly - Includes hoppers, augers, toner supply solenoid (SL6), and the 4 'Toner Out' sensors |
| 684285520KC |
HP Paper Exit Photosensor (PS1) - Detects Media in Exit Assy |
| 8120-6302 |
HP 'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| C3120-60001 |
HP Toner Collection Kit - Collects Excess Toner - Accessed by Lifting up Developer Access Door on Left Side of Printer |
| C3120A |
HP Toner Collection Kit - Collects Excess Toner - Accessed by Lifting up Developer Access Door on Left Side of Printer |
| C3965-67901 |
HP Developer Assembly (C3965A) - for Developing Black Toner Applied to the Paper |
| C3965A |
HP Developer assembly - For developing black toner applied to the paper |
| C3966-67901 |
HP Developer Assembly (C3966A) - for Developing the Three Colored Toners Applied to the Paper |
| C3966A |
HP Developer assembly - For developing the three colored toners applied to the paper |
| C3967-67901 |
HP Photoconductive Drum Cartridge (C3967A) - All Four Colors are Applied Directly to Drum, Then Transferred to the Paper - Installs in Center of Printer (30,000 Pages Typical Life)
|
0 items